thesis latex style

No Search Results

How to Write a Thesis in LaTeX (Part 1): Basic Structure

Part 1 | Part 2 | Part 3 | Part 4 | Part 5

Author: Josh Cassidy (August 2013)

This five-part series of articles uses a combination of video and textual descriptions to teach the basics of writing a thesis using LaTeX. These tutorials were first published on the original ShareLateX blog site during August 2013; consequently, today's editor interface (Overleaf) has changed considerably due to the development of ShareLaTeX and the subsequent merger of ShareLaTeX and Overleaf. However, much of the content is still relevant and teaches you some basic LaTeX—skills and expertise that will apply across all platforms.

Your thesis could be the longest and most complicated document you'll ever write, which is why it's such a good idea to use L a T e X instead of a common word processor. L a T e X makes tasks that are difficult and awkward in word processors, far simpler.

When writing something like a thesis its worth splitting up the document into multiple .tex files. It's also wise to organise the project using folders; therefore, we'll create two new folders, one for all the images used in the project and one for all the .tex files making up the main body of the thesis.

• 1 The preamble
• 2 The frontmatter
• 3 The main body
• 4 The endmatter
• 5 All articles in this series

The preamble

In this example, the main.tex file is the root document and is the .tex file that will draw the whole document together. The first thing we need to choose is a document class. The article class isn't designed for writing long documents (such as a thesis) so we'll choose the report class, but we could also choose the book class.

We can also change the font size by adding square brackets into the \documentclass command and specifying the size—we'll choose 12pt. Let's also prepare the document for images by loading the graphicx package. We'll also need to tell L a T e X where to look for the images using the \graphicspath command, as we're storing them in a separate folder.

The start of our preamble now looks like this:

Now we can finish off the preamble by filling in the title, author and date information. To create the simplest title page we can add the thesis title, institution name and institution logo all into the \title command; for example:

This isn't the best way to alter the title page so we'll look at more elaborate ways of customising title pages later on in the series, but this will suffice for now.

This is what the \maketitle command now produces for us:

The frontmatter

After the title page we need to add in an abstract, dedication, declaration and acknowledgements section. We can add each of these in on separate pages using unnumbered chapters. To do this we use the \chapter command and add an asterisk. After these sections we'll add a table of contents using the \tableofcontents command:

The main body

Now for the main body of the document. In this example we will add-in five chapters, one of which will be an introduction and another will be a conclusion. However, instead of just composing these chapters in the main .tex file, we'll create a separate .tex file for each chapter in the chapters folder. We can then fill in these chapters with text remembering to split them up into sections and subsections.

Then to add these chapters into the document, we use the \input command in the root document. Remember to add in chapters/ before the file name so that L a T e X knows where to find it.

The endmatter

We will now add in an appendix at the end of the document. To do this we use the \appendix command to tell L a T e X that what follows are appendices. Again We'll write the appendix in a separate file and then input it.

If we now compile the document, all our chapters will be added to the document and the table of contents will be automatically generated.

Now we have a basic structure for a thesis set up. In the next post I will show you how to change the page layout and add headers.

All articles in this series

• Part 1: Basic Structure ;
• Part 2: Page Layout ;
• Part 3: Figures, Subfigures and Tables ;
• Part 4: Bibliographies with BibLaTeX ;
• Part 5: Customising Your Title Page and Abstract .
• Documentation Home
• Learn LaTeX in 30 minutes

Overleaf guides

• Creating a document in Overleaf
• Uploading a project
• Copying a project
• Creating a project from a template
• Using the Overleaf project menu
• Including images in Overleaf
• Exporting your work from Overleaf
• Working offline in Overleaf
• Using Track Changes in Overleaf
• Using bibliographies in Overleaf
• Sharing your work with others
• Using the History feature
• Debugging Compilation timeout errors
• How-to guides
• Guide to Overleaf’s premium features

LaTeX Basics

• Creating your first LaTeX document
• Choosing a LaTeX Compiler
• Paragraphs and new lines
• Bold, italics and underlining

Mathematics

• Mathematical expressions
• Subscripts and superscripts
• Brackets and Parentheses
• Fractions and Binomials
• Aligning equations
• Spacing in math mode
• Integrals, sums and limits
• Display style in math mode
• List of Greek letters and math symbols
• Mathematical fonts
• Using the Symbol Palette in Overleaf

Figures and tables

• Inserting Images
• Positioning Images and Tables
• Lists of Tables and Figures
• Drawing Diagrams Directly in LaTeX
• TikZ package

References and Citations

• Bibliography management with bibtex
• Bibliography management with natbib
• Bibliography management with biblatex
• Bibtex bibliography styles
• Natbib bibliography styles
• Natbib citation styles
• Biblatex bibliography styles
• Biblatex citation styles
• Multilingual typesetting on Overleaf using polyglossia and fontspec
• Multilingual typesetting on Overleaf using babel and fontspec
• International language support
• Quotations and quotation marks

Document structure

• Sections and chapters
• Table of contents
• Cross referencing sections, equations and floats
• Nomenclatures
• Management in a large project
• Multi-file LaTeX projects
• Lengths in L a T e X
• Headers and footers
• Page numbering
• Paragraph formatting
• Line breaks and blank spaces
• Text alignment
• Page size and margins
• Single sided and double sided documents
• Multiple columns
• Code listing
• Code Highlighting with minted
• Using colours in LaTeX
• Margin notes
• Font sizes, families, and styles
• Font typefaces
• Supporting modern fonts with X Ǝ L a T e X

Presentations

• Environments

Field specific

• Theorems and proofs
• Chemistry formulae
• Feynman diagrams
• Molecular orbital diagrams
• Chess notation
• Knitting patterns
• CircuiTikz package
• Pgfplots package
• Typesetting exams in LaTeX
• Attribute Value Matrices

Class files

• Understanding packages and class files
• List of packages and class files
• Writing your own package
• Writing your own class

Advanced TeX/LaTeX

• In-depth technical articles on TeX/LaTeX

Get in touch

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.

Email: 

because LaTeX matters

Writing a thesis in latex.

Writing a thesis is a time-intensive endeavor. Fortunately, using LaTeX, you can focus on the content rather than the formatting of your thesis. The following article summarizes the most important aspects of writing a thesis in LaTeX, providing you with a document skeleton (at the end) and lots of additional tips and tricks.

Document class

The first choice in most cases will be the report document class:

See here for a complete list of options. Personally, I use draft a lot. It replaces figures with a box of the size of the figure. It saves you time generating the document. Furthermore, it will highlight justification and hyphenation errors ( Overfull \hbox ).

Check with your college or university. They may have an official or unofficial template/class-file to be used for writing a thesis.

Again, follow the instructions of your institution if there are any. Otherwise, LaTeX provides a few basic command for the creation of a title page.

Use \today as \date argument to automatically generate the current date. Leave it empty in case you don’t want the date to be printed. As shown in the example, the author command can be extended to print several lines.

For a more sophisticated title page, the titlespages package has a nice collection of pre-formatted front pages. For different affiliations use the authblk package, see here for some examples.

Contents (toc/lof/lot)

Nothing special here.

The tocloft package offers great flexibility in formatting contents. See here for a selection of possibilities.

Often, the page numbers are changed to roman for this introductory part of the document and only later, for the actual content, arabic page numbering is used. This can be done by placing the following commands before and after the contents commands respectively.

LaTeX provides the abstract environment which will print “Abstract” centered as a title.

The actual content

The most important and extensive part is the content. I strongly suggest to split up every chapter into an individual file and load them in the main tex-file.

In thesis.tex:

In chapter1.tex:

This way, you can typeset single chapters or parts of the whole thesis only, by commenting out what you want to exclude. Remember, the document can only be generated from the main file (thesis.tex), since the individual chapters are missing a proper LaTeX document structure.

See here for a discussion on whether to use \input or \include .

Bibliography

The most convenient way is to use a bib-tex file that contains all your references. You can download bibtex items for articles, books, etc. from Google scholar or often directly from the journal websites.

Two packages are commonly used to personalize bibliographies, the newer biblatex and the natbib package, which has been around for many years. These packages offer great flexibility in customizing the look of a bibliography, depending on the preference in the field or the author.

Other commonly used packages

• graphicx : Indispensable when working with figures/graphs.
• subfig : Controlling arrangement of several figures (e.g. 2×2 matrix)
• minitoc : Adds mini table of contents to every chapter
• nomencl : Generate and format a nomenclature
• listings : Source code printer for LaTeX
• babel : Multilingual package for standard document classes
• fancyhdr : Controlling header and footer
• hyperref : Hypertext links for LaTeX
• And many more

Minimal example code

I’m aware that this short post on writing a thesis only covers the very basics of a vast topic. However, it will help you getting started and focussing on the content of your thesis rather than the formatting of the document.

Share this:

16 comments.

8. June 2012 at 7:09

I would rather recommend a documentclass like memoir or scrreprt (from KOMA-Script), since they are much more flexible than report.

8. June 2012 at 8:12

I agree, my experience with them is limited though. Thanks for the addendum. Here is the documentation: memoir , scrreprt (KOMA script)

8. June 2012 at 8:02

Nice post Tom. I’m actually writing a two-part (or three) on Writing the PhD thesis: the tools . Feel free to comment, I hope to update it as I write my thesis, so any suggestions are welcome.

8. June 2012 at 8:05

Thanks for the link. I just saw your post and thought I should really check out git sometimes :-). Best, Tom.

8. June 2012 at 8:10

Yes, git is awesome. It can be a bit overwhelming with all the options and commands, but if you’re just working alone, and probably on several machines, then you can do everything effortlessly with few commands.

11. June 2012 at 2:15

That’s what has kept me so far. But I’ll definitely give it a try. Thanks!

8. June 2012 at 8:08

What a great overview. Thank you, this will come handy… when I finally get myself to start writing that thesis 🙂

8. June 2012 at 14:12

Thanks and good luck with your thesis! Tom.

9. June 2012 at 4:08

Hi, I can recommend two important packages: lineno.sty to insert linenumbers (really helpful in the debugging phase) and todonotes (allows you to insert todo-notes for things you still have to do.)

11. June 2012 at 0:48

Thanks Uwe! I wrote an article on both, lineno and todonotes . Here is the documentation: lineno and todonotes for more details.

12. June 2012 at 15:51

Thanks for the post, i’m currently writing my master thesis 🙂

A small note: it seems that subfig is deprecated for the subcaption package: https://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions#Subfloats

12. June 2012 at 16:05

Hey, thanks for the tip. Too bad they don’t say anything in the documentation apart from the fact that the packages are not compatible.

1. August 2012 at 21:11

good thesis template can be also found here (free): http://enjobs.org/index.php/downloads2

including living headers, empty pages, two-sided with front and main matter as well as a complete structure

2. August 2012 at 11:03

Thanks for the link to the thesis template!

15. November 2012 at 22:21

Hi Tom, I’m writing a report on spanish in LaTex, using emacs, auctex, aspell (~170pags. ~70 files included by now) and this blog is my savior every time because I’m quite new with all these.

The question: Is there anyway (other than \- in every occurrence) to define the correct hyphenation for accented words (non english characters like é)? I have three o four accented words, about the subject of my report, that occur near 100 times each, across several files, and the \hyphenation{} command can’t handle these.

20. November 2012 at 3:47

I was wondering what packages you load in your preamble. For a better hyphenation (and easier typing), you should use these packages:

See here for more details.

If this doesn’t help, please provide a minimal working example to illustrate the problem.

Thanks, Tom.

Leave a Reply Cancel reply

Research Guides

Submit and publish your thesis.

• The Graduate Thesis: What is it?
• Thesis Defences
• Deadlines and Fees
• Formatting in MS Word

Formatting in LaTeX

• Making Thesis Accessible
• Thesis Embargo
• Review and Release
• Your Rights as an Author
• Re-using Third Party Materials
• Creative Commons Licenses for Theses
• Turning Thesis into an Article
• Turning Thesis into a Book
• Other Venues of Publication

For formatting instructions and requirements see the Formatting section of the School of Graduate Studies website. The thesis style template for LaTeX ( ut-thesis ) implements these requirements. You are not required to use the template, but using it will make most of the formatting requirements easier to meet.

►► Thesis template for LaTeX .

Below are some general formatting tips for drafting your thesis in LaTeX.  In addition, there are other supports available:

• Regular LaTeX workshops are offered via the library, watch the library workshop calendar at https://libcal.library.utoronto.ca/
• With questions about LaTeX formatting, contact Map and Data Library (MDL) using this form
• There are also great resources for learning LaTeX available via Overleaf

Many common problems have been solved on the TeX - LaTeX Stack Exchange Q & A Forum

LaTeX Template

To use the LaTeX and ut-thesis , you need two things: a LaTeX distribution (compiles your code), and an editor (where you write your code). Two main approaches are:

• Overleaf : is a web-based platform that combines a distribution (TeX Live) and an editor. It is beginner-friendly (minimal set-up) and some people prefer a cloud-based platform. However, manually uploading graphics and managing a bibliographic database can be tedious, especially for large projects like a thesis.
• A LaTeX distribution can be installed as described here . ut-thesis can then be installed either: a) initially, with the distribution; b) automatically when you try to compile a document using \usepackage{ut-thesis} ; or manually via graphical or terminal-based package manager for the distribution.
• The LaTeX distribution allows you to compile code, but provides no tools for writing (e.g. syntax highlighting, hotkeys, command completion, etc.). There are many editor options that provide these features. TeXstudio is one popular option.

Occasionally, the version of ut-thesis on GitHub  may be more up-to-date than the popular distributions (especially yearly TeX Live), including small bug fixes. To use the GitHub version, you can download the file ut-thesis.cls (and maybe the documentation ut-thesis .pdf ) and place it in your working directory. This will take priority over any other versions of ut-thesis on your system while in this directory.

LaTeX Formatting Tips

Here are a few tips & tricks for formatting your thesis in LateX.

Document Structure

Using the ut-thesis document class, a minimal example thesis might look like:

\documentclass{ut-thesis} \author {Your Name} \title {Thesis Title} \degree {Doctor of Philosophy} \department {LaTeX} \gradyear {2020} \begin {document}   \frontmatter   \maketitle   \begin {abstract}     % abstract goes here   \end {abstract}   \tableofcontents   \mainmatter   % main chapters go here   % references go here   \appendix   % appendices go here \end {document}

►►  A larger example is available on GitHub here .

You may want to consider splitting your code into multiple files. The contents of each file can then be added using \input{filename} .

The usual commands for document hierarchy are available like \chapter , \section , \subsection , \subsubsection , and \paragraph . To control which appear in the \tableofcontents , you can use \setcounter{tocdepth}{i} , where i = 2 includes up to \subsection , etc. For unnumbered sections, use \section* , etc. No component should be empty, such as \section{...} immediately followed by \subsection{...} .

Note: In the examples below, we denote the preamble vs body like:

preamble code --- body code

Tables & Figures

In LaTeX, tables and figures are environments called “floats”, and they usually don’t appear exactly where you have them in the code. This is to avoid awkward whitespace. Float environments are used like \begin{env} ... \end{env} , where the entire content ... will move with the float. If you really need a float to appear exactly “here”, you can use:

\usepackage{float} --- \begin{ figure}[H] ... \end {figure}

Most other environments (like equation) do not float.

A LaTeX table as a numbered float is distinct from tabular data. So, a typical table might look like:

\usepackage{booktabs} --- \begin {table}   \centering   \caption {The table caption}   \begin {tabular}{crll}     i &   Name & A &  B \\     1 &  First & 1 &  2 \\     2 & Second & 3 &  5 \\     3 &  Third & 8 & 13   \end {tabular} \end {table}

The & separates cells and \\ makes a new row. The {crll} specifies four columns: 1 centred, 1 right-aligned, and 2 left-aligned.

Fancy Tables

Some helpful packages for creating more advanced tabular data:

• booktabs : provides the commands \toprule , \midrile , and \bottomrule , which add horizontal lines of slightly different weights.
• multicol : provides the command \multicolumn{2}{r}{...} to “merge” 2 cells horizontally with the content ... , centred.
• multirow : provides the command \multirow{2}{*}{...} , to “merge” 2 cells vertically with the content ... , having width computed automatically (*).

A LaTeX figure is similarly distinct from graphical content. To include graphics, it’s best to use the command \includegraphics from the graphicx package. Then, a typical figure might look like:

\usepackage{graphicx} --- \begin {figure}   \centering   \includegraphics[width=.6 \textwidth ]{figurename} \end {figure}

Here we use .6\textwidth to make the graphic 60% the width of the main text.

By default, graphicx will look for figurename in the same folder as main.tex ; if you need to add other folders, you can use \graphicspath{{folder1/}{folder2/}...} .

The preferred package for subfigures is subcaption ; you can use it like:

\usepackage{subcaption} --- \begin {figure} % or table, then subtable below   \begin {subfigure}{0.5 \textwidth }     \includegraphics[width= \textwidth ]{figureA}     \caption {First subcaption}   \end {subfigure}   \begin {subfigure}{0.5 \textwidth }     \includegraphics[width= \textwidth ]{figureB}     \caption {Second subcaption}   \end {subfigure}   \caption {Overall figure caption} \end {figure}

This makes two subfigures each 50% of the text width, with respective subcaptions, plus an overall figure caption.

Math can be added inline with body text like $E = m c^2$ , or as a standalone equation like:

\begin {equation}   E = m c^2 \end {equation}

A complete guide to math is beyond our scope here; again, Overleaf provides a great set of resources to get started.

Cross References

We recommend using the hyperref package to make clickable links within your thesis, such as the table of contents, and references to equations, tables, figures, and other sections.

A cross-reference label can be added to a section or float environment using \label{key} , and referenced elsewhere using \ref{key} . The key will not appear in the final document (unless there is an error), so we recommend a naming convention like fig:diagram , tab:summary , or intro:back for \section{Background} within \chapter{Intro} , for example. We also recommend using a non-breaking space ~ like Figure~\ref{fig:diagram} , so that a linebreak will not separate “Figure” and the number.

You may need to compile multiple times to resolve cross-references (and citations). However, this occurs by default as needed in most editors.

The LaTeX package tikz provides excellent tools for drawing diagrams and even plotting basic math functions. Here is one small example:

\usepackage{tikz} --- \begin {tikzpicture}   \node [red,circle]  (a) at (0,0) {A};   \node [blue,square] (b) at (1,0) {B};   \draw [dotted,->]   (a) -- node[above]{ $ \alpha $ } (b); \end {tikzpicture}

Don’t forget semicolons after every command, or else you will get stuck while compiling.

There are several options for managing references in LaTeX. We recommend the most modern package: biblatex , with the biber backend.  A helpful overview is given here .

Assuming you have a file called references.bib that looks like:

@article{Lastname2020,   title = {The article title},   author = {Lastname, First and Last2, First2 and Last3 and First3},   journal = {Journal Name},   year = {2020},   vol = {99},   no = {1} } ...

then you can cite the reference Lastname2020 using biblatex like:

\usepackage[backend=biber]{biblatex} \addbibresource {references.bib} --- \cite {Lastname2020} ... \printbibliography

Depending on what editor you’re using to compile, this may work straight away. If not, you may need to update your compiling command to:

pdflatex main && biber main && pdflatex main && pdflatex main

Assuming your document is called main.tex . This is because biber is a separate tool from pdflatex . So in the command above, we first identify the cited sources using pdflatex , then collect the reference information using biber , then finish compiling the document using pdflatex , and then we compile once more in case anything got missed.

There are many options when loading biblatex to configure the reference formatting; it’s best to search the CTAN documentation for what you want to do.

Windows users may find that biber.exe or bibtex.exe get silently blocked by some antivirus software. Usually, an exception can be added within the antivirus software to allow these programs to run.

• << Previous: Formatting in MS Word
• Next: Making Thesis Accessible >>
• Last Updated: Sep 15, 2023 3:23 PM
• URL: https://guides.library.utoronto.ca/thesis

Library links

• Library Home
• Renew items and pay fines
• Library hours
• Engineering
• UT Mississauga Library
• UT Scarborough Library
• Information Commons
• All libraries

University of Toronto Libraries 130 St. George St.,Toronto, ON, M5S 1A5 [email protected] 416-978-8450 Map About web accessibility . Tell us about a web accessibility problem . About online privacy and data collection .

© University of Toronto . All rights reserved. Terms and conditions.

Connect with us

Overleaf for LaTeX Theses & Dissertations: Home

• Using Templates on Overleaf
• Reference Managers and Overleaf
• Adding Tables, Images, and Graphs

Tips and tools for writing your LaTeX thesis or dissertation in Overleaf, including templates, managing references , and getting started guides.

Managing References

BibTeX is a file format used for lists of references for LaTeX documents. Many citation management tools support the ability to export and import lists of references in .bib format. Some reference management tools can generate BibTeX files of your library or folders for use in your LaTeX documents.

LaTeX on Wikibooks has a Bibliography Management page.

Find list of BibTeX styles available on Overleaf here

View a video tutorial on how to include a bibliography using BibTeX  here

Collaborate with Overleaf

Collaboration tools

• One version of your project accessible to collaborators via a shared link or email invitation
• Easily select the level of access for collaborators (view, edit, or owner access)
• Real-time commenting speeds up the review process
• Tracked changes and full history view help to see contributions from collaborators
• Labels help to organize and compare different versions
• Chat in real time with collaborators right within the project

How to get started writing your thesis in LaTeX

Writing a thesis or dissertation in LaTeX can be challenging, but the end result is well worth it - nothing looks as good as a LaTeX-produced pdf, and for large documents it's a lot easier than fighting with formatting and cross-referencing in MS Word. Review this video from Overleaf to help you get started writing your thesis in LaTeX, using a standard thesis template from the Overleaf Gallery .

You can upload your own thesis template to the Overleaf Gallery if your university provides a set of LaTeX template files or you may find your university's thesis template already in the Overleaf Gallery.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other tutorial videos  if not), and focuses on how to work with a large project split over multiple files.

Add Institutional Library contact info here.

Contact Overleaf   or email [email protected]

5-part Guide on How to Write a Thesis in LaTeX

5-part LaTeX Thesis Writing Guide

Part 1: Basic Structure corresponding  video

Part 2: Page Layout corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding video

Part 4: Bibliographies with Biblatex corresponding video

Part 5: Customizing Your Title Page and Abstract corresponding video

ShareLaTeX Joins Overleaf!

Read more about Overleaf and ShareLaTeX joining forces here

Link your ORCiD ID

Link your ORCiD account to your Overleaf account.

See Overleaf news   on  our blog.

• Next: Using Templates on Overleaf >>
• Last Updated: May 18, 2021 1:57 PM
• URL: https://overleaf.libguides.com/Thesis

Overleaf for LaTeX Theses & Dissertations: Home

• Using Templates on Overleaf
• Reference Managers and Overleaf
• Adding Graphs, Tables & Images

Dissertations and Theses

Tips and tools for writing your LaTeX thesis or dissertation in Overleaf, including templates, managing references , and getting started guides.

Getting started with your thesis or dissertation

How to get started writing your thesis in LaTeX

Writing a thesis or dissertation in LaTeX can be challenging, but the end result is well worth it - nothing looks as good as a LaTeX-produced pdf, and for large documents it's a lot easier than fighting with formatting and cross-referencing in MS Word. Review this video from Overleaf to help you get started writing your thesis in LaTeX, using a standard thesis template from the Overleaf Gallery .

You can upload your own thesis template to the Overleaf Gallery if your university provides a set of LaTeX template files or you may find your university's thesis template already in the Overleaf Gallery.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other tutorial videos  if not), and focuses on how to work with a large project split over multiple files.

5-part Guide on How to Write a Thesis in LaTeX

5-part LaTeX Thesis Writing Guide

Part 1: Basic Structure corresponding  video

Part 2: Page Layout corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding video

Part 4: Bibliographies with Biblatex corresponding video

Part 5: Customizing Your Title Page and Abstract corresponding video

Managing References

BibTeX is a file format used for lists of references for LaTeX documents. Many citation management tools support the ability to export and import lists of references in .bib format. Some reference management tools can generate BibTeX files of your library or folders for use in your LaTeX documents.

LaTeX on Wikibooks has a Bibliography Management page.

Find list of BibTeX styles available on Overleaf here

View a video tutorial on how to include a bibliography using BibTeX  here

Collaborate with Overleaf

Collaboration tools

Every project you create has a secret link. Just send it to your co-authors, and they can review, comment and edit. Overleaf synchronizes changes from all authors, so everyone always has the latest version. More advanced tools include protected projects and integration with Git.

Collaborate online and offline with Overleaf and Git

Protected projects with Overleaf Pro

Link your ORCiD ID

Link your ORCiD account to your Overleaf account.

Add Institutional Library contact info here.

Contact Overleaf   or email [email protected]

See Overleaf news   on  our blog.

ShareLaTeX Joins Overleaf!

Read more about Overleaf and ShareLaTeX joining forces here

• Next: Using Templates on Overleaf >>
• Last Updated: Oct 6, 2022 1:00 PM
• URL: https://guides.lib.virginia.edu/overleaf-dissertations
• 434-924-3021
• [email protected]
• Ask a Librarian
• UVA Shannon Library P.O. Box 400113 160 McCormick Road Charlottesville, VA 22904

About the Library

• Staff Directory
• Fellowships

Using the Library

• Library Use Policies
• Off-Grounds Access
• ITS Computing Accounts
• Accessibility Services
• Emergency Information
• UVA Privacy Policy
• Tracking Opt-out

Other Sites

• Cavalier Advantage
• Library Staff Site

Graduate Education

Office of graduate and postdoctoral education, thesis templates.

The following thesis format templates should help you get started with formatting your thesis or dissertation. Georgia Tech provides free Overleaf Professional accounts for all students, faculty, and staff who would like to use the collaborative, online LaTeX editor for their projects.

• LaTeX Template (.zip) - updated May 2020
• Featured LaTeX templates on Overleaf
• Word Thesis Template (.docx) - updated August 2016
• Georgia Tech Engineering Reference Management System (GTERMS)

LaTeX Resources

• LaTeX Project
• Set the Quick Build command configuration to: “PdfLaTeX + Bib(la)tex) + PdfLaTeX (x2) + View Pdf”.
• Use the Quick Build command to compile and view your .pdf file.
• If you decide to use a “build” subdirectory for output files, you must point BibTeX to the proper subdirectory.

LaTeX is a powerful text processing and formatting tool that produces clean, consistent results. This high-quality typesetting system is a free service provided by Georgia Tech. It is available on many platforms and can be used with the editor of your choice. LaTeX is the de facto standard for the communication and publication of scientific documents.

Although Graduate Education does not offer direct technical support, Tech does provide help via campus partners such as the Library and Overleaf (online LaTeX editor). Please check the Library events page for courses on LaTex, or contact Overleaf directly.

Many students have also found useful tips for dealing with specific problems by entering keywords such as "LaTeX formatting table captions" in their favorite search engines.

Most Common LaTeX to PDF Problem

The most common problem we see with Electronic Theses & Dissertations (ETDs) created in LaTeX is the altering of the page size, particularly an increase of the bottom margin to more than one inch, and sometimes an accompanying decrease in the top and/or right margins to less than the requisite one inch. Less frequently, there will also be problems with figures disappearing or changing appearance. The sizing error may be introduced inadvertently during the conversion from .dvi to .pdf or .ps when the program doing the converting defaults to the A4 European page size. Always check your PDF file after conversion, even if your source file looked perfect.

The following fixes have been found by your fellow Tech graduate students and passed along to the Graduate Thesis Office. We hope they help you:

• First, before converting the .tex file to .dvi, make sure the class header file in your .tex file says something like "\documentclass[12pt, letter]{article}".
• If you are converting the resulting .dvi file to a .ps file, be sure the dvips options specify "-P pdf -t letter".
• When you are converting to .pdf from either the .dvi file directly or from a .ps file, locate the C:\texmf\dvipdfm\config\config\ or analogous folder for PDFs in your system. Replace the line "p a4" with "p letter".

Check our frequently asked questions (FAQ) to see if your question has already been answered. Else, contact Graduate Education at [email protected] .

Accessibility Information

Download Microsoft Products   >      Download Adobe Reader   >

home | writing | TIL | now | about

Writing a thesis in latex.

This article is a guide to constructing a decent parent file for a thesis or dissertation compiled in Latex. The specific details implemented here, and included in the example files, are those set out by the guidelines for submission to the University of Nottingham, but can be easily amended to suit any sensible requirements.

Considerable attention has been paid to presenting the final document as a PDF file, which keeps the file size manageable (compared to postscript) and allows groovy add-ons such as hyperlinks and back-referencing. However, several hacks are required to attain good functionality from your PDF file and these can give the latex code a mysterious (and messy) appearance in places. While I highly recommend the inclusion of the PDF-related commands, they are not strictly necessary and can be ignored especially if you are new to Latex.

Note for Windows users

The code outlined below was designed and implemented on the unix system at Nottingham. For those of you unfortunate enough to be running a Windows box, a number of problems may arise when using the below code:

First off, not all the packages used will be present and will need to be installed. Probably the easiest way to do this is to google the package name with the extension .sty and save this file in the C:\VTEX\l2e\\ directory of your machine. Note that for the natbib package, you will also need to download the relevant .bst file, which in this case is unsrtnat.bst .

Also, many of the packages that are installed locally may need updating. For instance, the computers I have tested on both have old versions of the geometry and caption packages, which cause Latex to return errors. To resolve these problems, either download the latest versions, or remove the includefoot option from the geometry package and set the bottom margin to 1.4in.

Also, the code for compiling to PDF does not work so well in Windows, and so it is recommended that Windows users use the template without PDF code.

Requirements

The guidelines for theses to be submitted to the University of Nottingham specify that:

• the document should be presented on single-sided a4 paper and typeset in a double-spaced size 10-12 font;
• the left-hand margin should be at least 1.5 inches (4cm) to allow for binding;
• the other three margins should be at least 1 inch (2.5cm).

Other settings such as the way chapter headings are formatted, and whether headers are included, are not specified and are up to the user. In this case, we’ll install headers and tinker with the chapter formatting.

Template files

Here are the template files which this page explains:

• thesis_without_pdfcode.tex
• thesis_with_pdfcode.tex

The appearance of both these files on the printed page will be identical; however after compilation into PDF (see the section below) and opening in Adobe Acrobat (or a similar PDF reader), the advantages that come with the PDF format will be apparent.

• thesis_without_pdfcode.pdf
• thesis_with_pdfcode.pdf

The rest of this page is devoted to explaining the code in these files.

Document structure

The document begins in a standard and entirely self-explanatory manner.

Preamble: essential packages

Next, the essential packages are loaded:

where the geometry package has been loaded to allow the margins to be set in a neat and consistent way. The non-obvious option includefoot ensures that the footer (which only contains the pagenumber) is included in the page and is thus 1 inch above the bottom of the page. Note that this option is only available in recent versions of the package: if you’re using an old version and can’t/won’t upgrade, then remove the offending option and extend the bottom margin to 1.4in. headheight=13.6pt is included due to to ensure compatibility with the fancyhdr package (and is not required if you don’t use the fancyhdr package). Also quite essential is the natbib package:

where the various options ensure that references appear in the document as:

…boiled dog can do maths claims experimenter [10,12,15-18].

Alternative referencing styles are easily implemented, see the natbib help file for more details. In fact, to use the natbib package, you’ll have to read at least a few lines of the help file so you understand the difference between \citet and \citep , and I insist you do that now.

Preamble: custom captions (optional)

We now set the figure captions to be elegant and dignified:

Note that early versions of this package don’t support the margin= and tableposition= options; in this case, these trimmings will have to be ignored.

Preamble: custom fonts (optional)

You can also choose an alternative font for both the text and the mathematical characters. This can be achieved by:

Aside from mathpazo , there are several other fonts available, such as chancery , palatino and times (all loaded in the same way).

Preamble: fancy headers (optional)

Feeling a little devil-may-care? If so, you’ll probably want to install some elegant headers along each page. This is easily achieved through the fancyhdr package:

The final complicated-looking three lines simply ensure that the headings for appendices are formatted correctly. (Without these lines, what should read “Appendix A” is set as “Chapter A”.)

Preamble: customised chapter/section headings (optional)

We now make use of several customisation options that are bundled with the sectsty package.

These alter the appearance of the first page of each chapter to have a centred title, with the word “chapter” set in small capitals immediately above. Feel free to employ your own individual and highly refined tastes here in choosing your own chapter/section settings.

Preamble: pdf options (optional)

If you want to publish your thesis on the internet, or even just to email it to someone, then you’ll want to store it in the ubiquitous PDF format. Doing so offers some neat facilities, such as hyperlinking, which are implemented by the hyperref package:

There are various other options you can pass to your favourite PDF reader via the \hypersetup command, such as pdftitle , pdfauthor and pdfsubject ; however, they’re not really essential. Note that the hyperlink colours have all been set to black for consistent printing. Should you want to distribute your thesis over the web, then it would be advisable to set these colours to red or something similarly vibrant and exciting.

Things get a little messy now as a hack is required to ensure the hyperlinks actually jump to the right place.

No need to worry about this code, let’s just move straight on.

Preamble: page layout

We now set various parameters to alter the general page layout:

The first two of these commands alter the paragraph formatting so that new paragraphs are not indented but separated from the previous one by a small amount of whitespace; the third sets the line spacing. The sharp-eyed among you will notice the discrepancy between our chosen line-spacing and that dictated by the university guidelines. However, no matter how poor your eyesight is, you’ll quickly appreciate that true double line-spacing (set with \renewcommand(\baselinestretch}{2} ) looks rubbish. In addition, Nottingham University are perfectly happy to accept theses set with the above line-spacing, which is more pleasing to the eye.

Some final settings:

Set which chapters to include when Latex is next run. The advantage of this method is that all your cross-references are remembered and Latex does not spit out loads of warnings.

Main matter

We now begin the document in earnest and define a suitable title:

followed by a dedication:

We now construct an abstract:

some acknowledgements:

and a contents page:

Now, we alter the pagenumbering to arabic and point to the relevant chapter files:

All your chapter files should be included here; to save time when editing, use the \includeonly command to specify which chapters to compile.

Finally, we make sure there is a link to the references section in the table of contents and reference the correct bibiography file (which in this case is called bibliography.bib ).

And there we have it: a complete thesis parent file that not only looks good on the printed page, but is fully functional and hyperlinked in PDF format.

Compiling to PDF

Whether you’ve included all the red PDF commands or not, you can convert your TEX file to PDF by running (in unix):

The additional argument to ps2pdf is required as the default paper size is US Letter. Note that you will probably need to bibtex your thesis file before running latex for the final time.

For Windows, first open a command window by going Start->Run and entering cmd . Provided MiKTeX and GhostScript are correctly installed then the necessary commands are:

The syntax for ps2pdf is slightly different in Windows compared to Unix - and note that the output pdf filename MUST be specified, else the ps file is overwritten and corrupted.

Something wrong? Suggest an improvement or add a comment (see article history ) Tagged with: latex Filed in: guides

Previous: Tutorial: the complex Ginzburg-Landau equation Next: Following log files with tail -f

Copyright © 2005-2024 David Winterbottom Content licensed under CC BY-NC-SA 4.0 .

• Future Students
• Parents and Families

College of Engineering

• Research and Facilities
• Departments

Guide to Writing Your Thesis in LaTeX

The bibliography and list of references.

The Graduate School requires a Bibliography which includes all the literature cited for the complete thesis or dissertation. Quoting from the Graduate School’s Guidelines for the Format of Theses and Dissertations :

“Every thesis in Standard Format must contain a Bibliography which lists all the sources used or consulted in writing the entire thesis and is placed at the very end of the work. The complete citations are arranged alphabetically by last name of the author. Individual citations are not numbered. No abbreviations in titles of published works will be accepted. The full title of a book, journal, website, proceedings, or any other published work must be italicized or underlined. Citations must follow standards set by the style manual that the student is using. The bibliography for URI theses is not broken into categories.”

The List of References is not required by the Graduate School, but is the style commonly used in Engineering, Mathematics, and many of the Sciences. It consists of a numbered list of the sources used or consulted in writing the thesis in the order that they are referenced in the text. There can be either one List of References for the entire thesis, or a List of References at the end of each chapter.

Both the Bibliography and the List of References will be generated by the urithesis LaTeX class. All you need to do is add information about your sources to the references.bib file, which is a database containing all of the necessary information about the references, then cite the reference in your thesis using the \cite{} command.

Generating the Bibliography and References

The bibliography and list of references are generated by running BibTeX. To generate the bibliography, load the file thesisbib.tex into your editor, then run BibTeX on it.

If each chapter has its own list of references, you will need to run BibTeX on each chapter to update its list of references. If there is one list of references for the whole thesis (because you used the oneref option, you will only need to run BibTeX on the top level file thesis.tex .

How to Add a Bibliography Entry

When we want to refer to a source in the thesis, we place an entry for that source in the file references.bib , then cite the source in the thesis with the \cite{LABEL} command. The syntax for an entry in the references.bib file is of the form:

ENTRYTYPE is the type of bibliographic entry such as Book , Article , or TechReport , that this entry describes. At the end of this page is a list of all possible entry types .

LABEL is a unique string that is used to refer to this entry in the body of the thesis when using the \cite{LABEL} command.

The FIELDNAMEn entries are the fields that describe this entry, (ie. author, title, pages, year, etc.). Each entry type has certain required fields and optional fields. See the list of all entry types for a description of the available fields.

As an example, suppose we have a paper from a conference proceedings that we want to cite. First we make an entry in the our references.bib file of the form:

We then cite this source in the text of our thesis with the command \cite{re:toolan:as03} . This will generate a Bibliography entry that looks something like:

and a List of References entry that looks something like:

Types of List of References

The Graduate School requires that the bibliography is always at the end of the thesis and sorted alphabetically by author, therefore there is no options that affect it. The list of references is optional, therefore there are a few different ways that it can created.

By default a separate list of references appears at the end of each chapter, and are sorted by the order that they are cited in that chapter. The option oneref (see options ) will create a single list of references for the whole thesis, which due to the requirements of the Graduate School, will appear after the last chapter and before any appendices.

The option aparefs will cite references using the APA style, which is the last name of the author and year of publication, such as (Toolan, 2006), instead of the default IEEE style, which is a number, such as [1]. This option will also sort the references alphabetically by author, instead of in order of citation. The options oneref and aparefs can be used together to create a single list of references using the APA style.

Supported Bibliography Entry Types

The following is a list of all the entry types that can be used. Click on the desired type to see a detailed description of how to use that type.

• Article – An article from a journal or magazine
• Book – A book with an explicit publisher
• InBook – A part of a book, such as a chapter or selected page(s)
• InCollection – A part of a book having its own title
• Booklet – Printed and bound works that are not formally published
• Manual – Technical documentation
• InProceedings – An article in a conference proceedings
• Proceedings – The entire proceedings of a conference
• MastersThesis – A Master’s thesis
• PhDThesis – A Ph.D. dissertation
• TechReport – A report published by a school or other institution
• Unpublished – A document that has not been formally published
• Electronic – An internet reference like a web page
• Patent – A patent or patent application
• Periodical – A magazine or journal
• Standard – Formally published standard
• Misc – For use when nothing else fits

Articles that have not yet been published can be handled as a misc type with a note. Sometimes it is desirable to put extra information into the month field such as the day, or additional months. This is accomplished by using the BIBTEX concatenation operator “#“:

Example .bib using this type:

Books may have authors, editors or both. Example .bib using this type:

Inbook is used to reference a part of a book, such as a chapter or selected page(s). The type field can be used to override the word chapter (for which IEEE uses the abbreviation “ch.”) when the book uses parts, sections, etc., instead of chapters

Incollection is used to reference part of a book having its own title. Like book , incollection supports the series, chapter and pages fields. Also, the type field can be used to override the word chapter.

Booklet is used for printed and bound works that are not formally published. A primary difference between booklet and unpublished is that the former is/was distributed by some means. Booklet is rarely used in bibliographies.

Technical documentation is handled by the manual entry type.

References of papers in conference proceedings are handled by the inproceedings or conference entry type. These two types are functionally identical and can be used interchangeably. Example .bib using this type:

It is rare to need to reference an entire conference proceedings, but, if necessary, the proceedings entry type can be used to do so.

Master’s (or minor) theses can be handled with the mastersthesis entry type. The optional type field can be used to override the words “Master’s thesis” if a different designation is desired:

The phdthesis entry type is used for Ph.D. dissertations (major theses). Like mastersthesis , the type field can be used to override the default designation. Example .bib using this type:

Techreport is used for technical reports. The optional type field can be used to override the default designation “Tech. Rep.” Example .bib using this type:

The unpublished entry type is used for documents that have not been formally published. IEEE typically just uses “unpublished” for the required note field.

The electronic entry type is for internet references. IEEE formats electronic references differently by not using italics or quotes and separating fields with periods rather than commas. Also, the date is enclosed within parentheses and is placed closer to the title. This is probably done to emphasize that electronic references may not remain valid on the rapidly changing internet. Note also the liberal use of the howpublished field to describe the form or category of the entries. The organization and address fields may also be used. Example .bib using this type:

The nationality field provides a means to handle patents from different countries

The nationality should be capitalized. The assignee and address (of the assignee) fields are not used, however, they are provided. The type field provides a way to override the “patent” description with other patent related descriptions such as “patent application” or “patent request”:

The periodical entry type is used for journals and magazines.

The standard entry type is used for formally published standards. Alternatively, the misc entry type, along with its howpublished field, can be used to create references of standards.

Misc is the most flexible type and can be used when none of the other entry types are applicable. The howpublished field can be used to describe what exactly (or in what form) the reference is (or appears as). Possible applications include technical-report-like entries that lack an institution, white papers and data sheets.

Additional Comments

Because we are effectively creating multiple bibliographies, (one for the actual bibliography, and one for each list of references), the two LATEX commands \bibliographystyle{} and \bibliography{} are not used. They have been redefined to do nothing, and the equivalent of these commands are done automatically when necessary.

When there is a reference that should be included in the bibliography, but does not need to be explicitly referenced in the thesis, use the \nocite{} command. This command works like the \cite{} command, except it does not put the citation in the list of references, only in the bibliography. The \nocite{} command must appear after the first \newchapter{} command, or it will be ignored.

When using the option aparefs , and a citation does not have an author, (such as often occurs with a web page), the key field can be used to specify what to use in the citation instead of the author’s name.

About the Bibliography Format

The bibliography format used by the urithesis class is based on the IEEE format. See the article “How to Use the IEEEtran BIBTEX Style” by Michael Shell for more details.

An academic thesis, also known as a dissertation, is a substantial work produced by a graduate student to communicate their research and earn a degree. A thesis will typically include a review of the current state of research in the field of study followed by a central hypothesis to be investigated. The bulk of the thesis will then focus on the methods and results of the research performed, followed by a discussion on how the results add to the field in general. Theses are long, highly structured and include a lot of advanced document elements.

This template is designed for writing books and graduate-level theses and provides numerous examples and documentation to enable complex requirements. The design features a relatively narrow main text column with an adjacent wide margin to house notes, figures, tables, citations and captions.

• View Template Information

Masters/Doctoral Thesis

This template provides a full framework for writing a graduate level thesis. It is carefully structured and separated into multiple parts for easy editing. Included are the following pages/sections: a cover page, declaration of authorship, quotation, abstract, acknowledgements, contents page(s), list of figures, list of tables, abbreviations, physical constants, symbols, dedication, example chapter, example appendix and bibliography.

Classicthesis Typographic Thesis

This template has been designed as a homage to the Elements of Typographic Style. As such, it has an air of efficiency and optimal design. It is suitable for any high-level degree thesis such as for a PhD, Masters or Honors. Sections within the thesis are clearly separated in a consistent way, as are sections within each chapter. The default structure of the thesis proceeds in the following order: title page, dedication, abstract, publications, acknowledgements, contents, list of tables/figures/listings, acronyms, content chapters, appendices, bibliography, colophon and declaration.

Maggi Memoir Thesis

This template uses the memoir document class to beautifully typeset a thesis. It is suitable for any high-level degree thesis such as for a PhD, Masters or Honors. The layout of the content is in a thin format to promote easy reading and the template features advanced specification of margins and trimming. The thesis boasts a professional look which is immediately obvious from the title page itself and carries through the design of the rest of the document. Three custom fonts are used in the template to match the design and beautifully display your content.

LaTeX Templates Information

General enquiries [email protected]

Most templates licensed under CC BY-NC-SA 4.0

LaTeX Templates is developed in New Zealand

© Creodocs Limited. All Rights Reserved.

Navigation Menu

Search code, repositories, users, issues, pull requests..., provide feedback.

We read every piece of feedback, and take your input very seriously.

Saved searches

Use saved searches to filter your results more quickly.

To see all available qualifiers, see our documentation .

• Notifications

UCLA Thesis LaTeX style

uclathes/uclathes

Folders and files, repository files navigation, uclathes - ucla thesis latex style.

2017-04-13, release 1.4

2012-04-16, release 1.3

WHAT IS UCLATHES?

This package is a LaTeX2e document style to format UCLA dissertations and theses. This style is based on work from Leslie Lamport, Dorab Patel, Eduardo Krell, Richard B. Wales, and John Heidemann.

The UCLA Graduate Division does not recognize uclathes as a template for a thesis or dissertation. While countless students have used this template and successfully filed their manuscripts, the Graduate Division does not accept the template (or previous submissions) as an excuse for not meeting the filing requirements. If you find any bugs or have issues completing the filing process, let us know in the Issues section with a solution for future students.

WHAT IS NEW WITH UCLATHES 1.4?

UCLA has changed the style requirements for theses and dissertations again as of September 2016. These changes make manuscripts more consistent with the new electronic format that was adopted in 2012. Ryan Rosario updated uclathes-1.3 to match the new style and can confirm that it works as his dissertation was approved under the new rules in Spring 2017. Much of these changes were indicated by Sean Lake and Xiaochen Lian, and their dissertations were approved February 2017 and March 2017 respectively. Ryan's dissertation was approved in April 2017.

Specifically:

• Margins are now 1" on all sides.
• Title and author name on title and abstract pages can no longer bold.
• The small caps \textsc{..} and \scshape titles for title page headers is no longer permitted.
• Title and author name on title and abstract pages can no longer larger than the surrounding text.
• If footnotes are single spaced, they must be separated by a single blank line.

Several other changes were made to make the files less confusing to use:

• Some filenames were changed to better reflect their purpose.
• Extra files required for the demo technical report were renamed and put into an include directory.

WHAT IS NEW WITH UCLATHES 1.3?

After many years, UCLA changed the rules and moved away from paper. (They seem to still have the awful information-sparse double spacing, but maybe in 15 more years...) John Colby updated uclathes-1.2 from 1996 to match the new style, and can confirm that it works as his dissertation was approved under the new rules in late March 2012.

WHAT IS NEW WITH UCLATHES 1.2?

There's a bug in \degreeyear handling. The workaround is described below in ``KNOWN PROBLEMS''.

WHAT IS NEW WITH UCLATHES 1.1?

I slightly shrunk page size to clearly conform to the requirements (problem reported by David Gast).

An example showing dual-mode formatting is present in demo2*.tex . My dissertation is formatted either with uclathes.cls (the submission version) and with report.cls (for my committee and a technical report) because IMHO the thesis requirements are not optimal. See the manual for more details how to dual-format your document.

WHAT IS IN UCLATHES?

Enclosed in this package are the following files:

uclathes.cls, uclath17.clo, uclathti.clo These three files implement the LaTeX2e "uclathes" document class.

uclathes.bst This file implements the BibTeX "uclathes" bibliography style.

thesis_spec.tex A document describing the "uclathes" style material with tips for approval. Candidate should read the document UCLA Thesis and Dissertation Filing Requirements which is the official specification for the filing format.

demo.tex An example first few pages of the thesis. The "demo thesis" described in thesdoc.tex .

demo_techreport.tex and all files in the include directory These files are not necessary for filing, but provide another demonstration thesis that can be formatted as a technical report (latex demo_techreport ),

Makefile Automates TeX'ing documents.

README.md The file you are now reading.

HOW TO INSTALL UCLATHES

The simplest way to install uclathes is to copy *.cls, *.clo, and *.bst into the directory where you run LaTeX.

Alternatively, you can copy these files into wherever LaTeX looks for its inputs.

WHERE'S THE REAL DOCUMENTATION

Rich Wales has prepared a good manual for uclathes. Read thesdoc.ps (or format and read thesdoc.tex ) before proceeding.

Moving forward, documentation will be centralized on the GitHub wiki at: https://github.com/uclathes/uclathes/wiki

IMPORTANT: The UCLA Graduate Division maintains a document titled UCLA Thesis and Dissertation Filing Requirements . As of April 2017, the manual is outdated, but the checklist on page 25 is updated and is used to approve manuscripts. https://grad.ucla.edu/gasaa/etd/filingrequirements.pdf

WHERE TO GET UCLATHES

The most recent version of this package can always be found at: https://github.com/uclathes/uclathes/tarball/master

ISPELL GOBBLYGOOK

LocalWords: uclathes Dorab Patel Eduardo Krell cls uclath clo uclathti bst ps BibTeX thesdoc tex README vesion URL http www html mac rep ti isi TeX'ing GOBBLYGOOK LocalWords bf rc LaTeX Lamport degreeyear Gast Makefile usepackage newlfont oldlfont

KNOWN PROBLEMS

\bf doesn't work, I get the error:

You're running LaTeX2e, and \bf isn't enabled by default. You should choose if you want new or old semantics and put \usepackage{newlfont} or \usepackage{oldlfont} in your document. I purposely did not include one of these packages in uclathes.cls to encourage people to convert to the new macros.

• If you don't specify a \degreeyear , the value on the title page may be wrong. (This bug occurs in demo.ps .)

Work around: always specify \degreeyear .

Alternate work around: find a real uclathes maintainer to fix the bug.

WHAT TO DO ABOUT BUGS

If a thesis formatted with uclathes is rejected by the Theses and Dissertations Advisor, please let us know so we can update it accordingly.

Uclathes is distributed as reply-ware. If you get it and use it and graduate, you're strongly encouraged to send me some e-mail to let me know that my work was not in vain.

--John Heidemann, 12 Jan 1996

mailto:[email protected]

Contributors 5

• Makefile 1.2%

• Documentation
• Download Latest Release

Clean Thesis

Clean Thesis is a clean, simple, and elegant LaTeX style for thesis documents.

Download v0.4.0

See the Changelog . Looking for the latest development version ?

Clean, Simple, Elegant

Clean Thesis is a LaTeX style for thesis documents, developed for my diplom thesis (Diplomarbeit). The style can be understood as my personal compromise — a typical clean looking scientific document combined and polished with minor beautifications.

The design of the Clean Thesis style is inspired by user guide documents from Apple Inc. (e.g. iMovie '08 or Keynote '09 ).

If you are looking for an exact and correct style regarding typographic rules, please have a look at the Classic Thesis Style .

Idea and Inspiration

The idea of providing my customized style for thesis documents passed through my mind while writing my own thesis. Motivated and inspired by the superb " Classic Thesis Style " by André Miede ( thanks to André for doing a great job ) I decided to collect all design and style related functionality in a separate LaTeX style and provide this style to other thesis writers .

Donation = 3 Easy Ways

If you like the Clean Thesis style, or you have used it for one of your own documents successfully there are (at least) three different but pretty easy ways of saying thank you.

Report issues

If you have ideas for new features, suggestions for improvements or you encounter problems and errors using the Clean Thesis style please report them using the issue tracker at the GitHub Project or send an email to issue SpamProtectionStringInEmail [at]cleanthesis.der-ric.de .

I would very much appreciate a donation in the form of a blog post, tweet, or facebook post. Share your experience and your opinion. Talk to your friends, fellow students, or colleagues about the Clean Thesis style.

Send a Postcard

Based on the idea of André Miede : I would be very pleased about a donation in the form of a POSTCARD . You can find my address in the file cleanthesis.pdf inside the style package. I am going to collect all postcards and exhibit them on this website.

Development, Contribute

The latest version of Clean Thesis is still in development. If you're an expert regarding TeX and you like to support the Clean Thesis project, you're welcome to get in touch with me using GitHub .