how to present findings in dissertation

• How it works

How to Write the Dissertation Findings or Results – Steps & Tips

Published by Grace Graffin at August 11th, 2021 , Revised On October 9, 2023

Each  part of the dissertation is unique, and some general and specific rules must be followed. The dissertation’s findings section presents the key results of your research without interpreting their meaning .

Theoretically, this is an exciting section of a dissertation because it involves writing what you have observed and found. However, it can be a little tricky if there is too much information to confuse the readers.

The goal is to include only the essential and relevant findings in this section. The results must be presented in an orderly sequence to provide clarity to the readers.

This section of the dissertation should be easy for the readers to follow, so you should avoid going into a lengthy debate over the interpretation of the results.

It is vitally important to focus only on clear and precise observations. The findings chapter of the  dissertation  is theoretically the easiest to write.

It includes  statistical analysis and a brief write-up about whether or not the results emerging from the analysis are significant. This segment should be written in the past sentence as you describe what you have done in the past.

This article will provide detailed information about  how to   write the findings of a dissertation .

When to Write Dissertation Findings Chapter

As soon as you have gathered and analysed your data, you can start to write up the findings chapter of your dissertation paper. Remember that it is your chance to report the most notable findings of your research work and relate them to the research hypothesis  or  research questions set out in  the introduction chapter of the dissertation .

You will be required to separately report your study’s findings before moving on to the discussion chapter  if your dissertation is based on the  collection of primary data  or experimental work.

However, you may not be required to have an independent findings chapter if your dissertation is purely descriptive and focuses on the analysis of case studies or interpretation of texts.

• Always report the findings of your research in the past tense.
• The dissertation findings chapter varies from one project to another, depending on the data collected and analyzed.
• Avoid reporting results that are not relevant to your research questions or research hypothesis.

Does your Dissertation Have the Following?

• Great Research/Sources
• Perfect Language
• Accurate Sources

If not, we can help. Our panel of experts makes sure to keep the 3 pillars of the Dissertation strong.

1. Reporting Quantitative Findings

The best way to present your quantitative findings is to structure them around the research  hypothesis or  questions you intend to address as part of your dissertation project.

Report the relevant findings for each research question or hypothesis, focusing on how you analyzed them.

Analysis of your findings will help you determine how they relate to the different research questions and whether they support the hypothesis you formulated.

While you must highlight meaningful relationships, variances, and tendencies, it is important not to guess their interpretations and implications because this is something to save for the discussion  and  conclusion  chapters.

Any findings not directly relevant to your research questions or explanations concerning the data collection process  should be added to the dissertation paper’s appendix section.

Use of Figures and Tables in Dissertation Findings

Suppose your dissertation is based on quantitative research. In that case, it is important to include charts, graphs, tables, and other visual elements to help your readers understand the emerging trends and relationships in your findings.

Repeating information will give the impression that you are short on ideas. Refer to all charts, illustrations, and tables in your writing but avoid recurrence.

The text should be used only to elaborate and summarize certain parts of your results. On the other hand, illustrations and tables are used to present multifaceted data.

It is recommended to give descriptive labels and captions to all illustrations used so the readers can figure out what each refers to.

How to Report Quantitative Findings

Here is an example of how to report quantitative results in your dissertation findings chapter;

Two hundred seventeen participants completed both the pretest and post-test and a Pairwise T-test was used for the analysis. The quantitative data analysis reveals a statistically significant difference between the mean scores of the pretest and posttest scales from the Teachers Discovering Computers course. The pretest mean was 29.00 with a standard deviation of 7.65, while the posttest mean was 26.50 with a standard deviation of 9.74 (Table 1). These results yield a significance level of .000, indicating a strong treatment effect (see Table 3). With the correlation between the scores being .448, the little relationship is seen between the pretest and posttest scores (Table 2). This leads the researcher to conclude that the impact of the course on the educators’ perception and integration of technology into the curriculum is dramatic.

Paired Samples

Paired samples correlation, paired samples test.

Also Read: How to Write the Abstract for the Dissertation.

2. Reporting Qualitative Findings

A notable issue with reporting qualitative findings is that not all results directly relate to your research questions or hypothesis.

The best way to present the results of qualitative research is to frame your findings around the most critical areas or themes you obtained after you examined the data.

In-depth data analysis will help you observe what the data shows for each theme. Any developments, relationships, patterns, and independent responses directly relevant to your research question or hypothesis should be mentioned to the readers.

Additional information not directly relevant to your research can be included in the appendix .

How to Report Qualitative Findings

Here is an example of how to report qualitative results in your dissertation findings chapter;

How do I report quantitative findings?

The best way to present your quantitative findings is to structure them around the  research hypothesis  or  research questions  you intended to address as part of your dissertation project. Report the relevant findings for each of the research questions or hypotheses, focusing on how you analyzed them.

How do I report qualitative findings?

The best way to present the  qualitative research  results is to frame your findings around the most important areas or themes that you obtained after examining the data.

An in-depth analysis of the data will help you observe what the data is showing for each theme. Any developments, relationships, patterns, and independent responses that are directly relevant to your  research question  or  hypothesis  should be clearly mentioned for the readers.

Can I use interpretive phrases like ‘it confirms’ in the finding chapter?

No, It is highly advisable to avoid using interpretive and subjective phrases in the finding chapter. These terms are more suitable for the  discussion chapter , where you will be expected to provide your interpretation of the results in detail.

Can I report the results from other research papers in my findings chapter?

NO, you must not be presenting results from other research studies in your findings.

You May Also Like

Learn how to write a good declaration page for your thesis with the help of our step-by-step comprehensive guide. Read now.

Have you failed dissertation, assignment, exam or coursework? Don’t panic because you are not alone. Get help from our professional UK qualified writers!

This brief introductory section aims to deal with the definitions of two paradigms, positivism and post-positivism, as well as their importance in research.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• LEARNING SKILLS
• Writing a Dissertation or Thesis
• Results and Discussion

Search SkillsYouNeed:

Learning Skills:

• A - Z List of Learning Skills
• What is Learning?
• Learning Approaches
• Learning Styles
• 8 Types of Learning Styles
• Understanding Your Preferences to Aid Learning
• Lifelong Learning
• Decisions to Make Before Applying to University
• Top Tips for Surviving Student Life
• Living Online: Education and Learning
• 8 Ways to Embrace Technology-Based Learning Approaches
• Critical Thinking Skills
• Critical Thinking and Fake News
• Understanding and Addressing Conspiracy Theories
• Critical Analysis
• Study Skills
• Exam Skills
• How to Write a Research Proposal
• Ethical Issues in Research
• Dissertation: The Introduction
• Researching and Writing a Literature Review
• Writing your Methodology
• Dissertation: Results and Discussion
• Dissertation: Conclusions and Extras

Writing Your Dissertation or Thesis eBook

Part of the Skills You Need Guide for Students .

• Research Methods
• Teaching, Coaching, Mentoring and Counselling
• Employability Skills for Graduates

Subscribe to our FREE newsletter and start improving your life in just 5 minutes a day.

You'll get our 5 free 'One Minute Life Skills' and our weekly newsletter.

We'll never share your email address and you can unsubscribe at any time.

Writing your Dissertation:  Results and Discussion

When writing a dissertation or thesis, the results and discussion sections can be both the most interesting as well as the most challenging sections to write.

You may choose to write these sections separately, or combine them into a single chapter, depending on your university’s guidelines and your own preferences.

There are advantages to both approaches.

Writing the results and discussion as separate sections allows you to focus first on what results you obtained and set out clearly what happened in your experiments and/or investigations without worrying about their implications.This can focus your mind on what the results actually show and help you to sort them in your head.

However, many people find it easier to combine the results with their implications as the two are closely connected.

Check your university’s requirements carefully before combining the results and discussions sections as some specify that they must be kept separate.

Results Section

The Results section should set out your key experimental results, including any statistical analysis and whether or not the results of these are significant.

You should cover any literature supporting your interpretation of significance. It does not have to include everything you did, particularly for a doctorate dissertation. However, for an undergraduate or master's thesis, you will probably find that you need to include most of your work.

You should write your results section in the past tense: you are describing what you have done in the past.

Every result included MUST have a method set out in the methods section. Check back to make sure that you have included all the relevant methods.

Conversely, every method should also have some results given so, if you choose to exclude certain experiments from the results, make sure that you remove mention of the method as well.

If you are unsure whether to include certain results, go back to your research questions and decide whether the results are relevant to them. It doesn’t matter whether they are supportive or not, it’s about relevance. If they are relevant, you should include them.

Having decided what to include, next decide what order to use. You could choose chronological, which should follow the methods, or in order from most to least important in the answering of your research questions, or by research question and/or hypothesis.

You also need to consider how best to present your results: tables, figures, graphs, or text. Try to use a variety of different methods of presentation, and consider your reader: 20 pages of dense tables are hard to understand, as are five pages of graphs, but a single table and well-chosen graph that illustrate your overall findings will make things much clearer.

Make sure that each table and figure has a number and a title. Number tables and figures in separate lists, but consecutively by the order in which you mention them in the text. If you have more than about two or three, it’s often helpful to provide lists of tables and figures alongside the table of contents at the start of your dissertation.

Summarise your results in the text, drawing on the figures and tables to illustrate your points.

The text and figures should be complementary, not repeat the same information. You should refer to every table or figure in the text. Any that you don’t feel the need to refer to can safely be moved to an appendix, or even removed.

Make sure that you including information about the size and direction of any changes, including percentage change if appropriate. Statistical tests should include details of p values or confidence intervals and limits.

While you don’t need to include all your primary evidence in this section, you should as a matter of good practice make it available in an appendix, to which you should refer at the relevant point.

For example:

Details of all the interview participants can be found in Appendix A, with transcripts of each interview in Appendix B.

You will, almost inevitably, find that you need to include some slight discussion of your results during this section. This discussion should evaluate the quality of the results and their reliability, but not stray too far into discussion of how far your results support your hypothesis and/or answer your research questions, as that is for the discussion section.

See our pages: Analysing Qualitative Data and Simple Statistical Analysis for more information on analysing your results.

Discussion Section

This section has four purposes, it should:

• Interpret and explain your results
• Answer your research question
• Justify your approach
• Critically evaluate your study

The discussion section therefore needs to review your findings in the context of the literature and the existing knowledge about the subject.

You also need to demonstrate that you understand the limitations of your research and the implications of your findings for policy and practice. This section should be written in the present tense.

The Discussion section needs to follow from your results and relate back to your literature review . Make sure that everything you discuss is covered in the results section.

Some universities require a separate section on recommendations for policy and practice and/or for future research, while others allow you to include this in your discussion, so check the guidelines carefully.

Starting the Task

Most people are likely to write this section best by preparing an outline, setting out the broad thrust of the argument, and how your results support it.

You may find techniques like mind mapping are helpful in making a first outline; check out our page: Creative Thinking for some ideas about how to think through your ideas. You should start by referring back to your research questions, discuss your results, then set them into the context of the literature, and then into broader theory.

This is likely to be one of the longest sections of your dissertation, and it’s a good idea to break it down into chunks with sub-headings to help your reader to navigate through the detail.

Fleshing Out the Detail

Once you have your outline in front of you, you can start to map out how your results fit into the outline.

This will help you to see whether your results are over-focused in one area, which is why writing up your research as you go along can be a helpful process. For each theme or area, you should discuss how the results help to answer your research question, and whether the results are consistent with your expectations and the literature.

The Importance of Understanding Differences

If your results are controversial and/or unexpected, you should set them fully in context and explain why you think that you obtained them.

Your explanations may include issues such as a non-representative sample for convenience purposes, a response rate skewed towards those with a particular experience, or your own involvement as a participant for sociological research.

You do not need to be apologetic about these, because you made a choice about them, which you should have justified in the methodology section. However, you do need to evaluate your own results against others’ findings, especially if they are different. A full understanding of the limitations of your research is part of a good discussion section.

At this stage, you may want to revisit your literature review, unless you submitted it as a separate submission earlier, and revise it to draw out those studies which have proven more relevant.

Conclude by summarising the implications of your findings in brief, and explain why they are important for researchers and in practice, and provide some suggestions for further work.

You may also wish to make some recommendations for practice. As before, this may be a separate section, or included in your discussion.

The results and discussion, including conclusion and recommendations, are probably the most substantial sections of your dissertation. Once completed, you can begin to relax slightly: you are on to the last stages of writing!

Continue to: Dissertation: Conclusion and Extras Writing your Methodology

See also: Writing a Literature Review Writing a Research Proposal Academic Referencing What Is the Importance of Using a Plagiarism Checker to Check Your Thesis?

Library Guides

Dissertations 5: findings, analysis and discussion: home.

• Results/Findings

Alternative Structures

The time has come to show and discuss the findings of your research. How to structure this part of your dissertation? 

Dissertations can have different structures, as you can see in the dissertation  structure  guide.

Dissertations organised by sections

Many dissertations are organised by sections. In this case, we suggest three options. Note that, if within your course you have been instructed to use a specific structure, you should do that. Also note that sometimes there is considerable freedom on the structure, so you can come up with other structures too. 

A) More common for scientific dissertations and quantitative methods:

- Results chapter 

- Discussion chapter

Example: 

• Introduction
• Literature review
• Methodology
• (Recommendations)

if you write a scientific dissertation, or anyway using quantitative methods, you will have some  objective  results that you will present in the Results chapter. You will then interpret the results in the Discussion chapter.  

B) More common for qualitative methods

- Analysis chapter. This can have more descriptive/thematic subheadings.

- Discussion chapter. This can have more descriptive/thematic subheadings.

• Case study of Company X (fashion brand) environmental strategies 
• Successful elements
• Lessons learnt
• Criticisms of Company X environmental strategies 
• Possible alternatives

C) More common for qualitative methods

- Analysis and discussion chapter. This can have more descriptive/thematic titles.

• Case study of Company X (fashion brand) environmental strategies 

If your dissertation uses qualitative methods, it is harder to identify and report objective data. Instead, it may be more productive and meaningful to present the findings in the same sections where you also analyse, and possibly discuss, them. You will probably have different sections dealing with different themes. The different themes can be subheadings of the Analysis and Discussion (together or separate) chapter(s). 

Thematic dissertations

If the structure of your dissertation is thematic ,  you will have several chapters analysing and discussing the issues raised by your research. The chapters will have descriptive/thematic titles. 

• Background on the conflict in Yemen (2004-present day)
• Classification of the conflict in international law  
• International law violations
• Options for enforcement of international law
• Next: Results/Findings >>
• Last Updated: Aug 4, 2023 2:17 PM
• URL: https://libguides.westminster.ac.uk/c.php?g=696975

CONNECT WITH US

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write a Discussion Section | Tips & Examples

How to Write a Discussion Section | Tips & Examples

Published on 21 August 2022 by Shona McCombes . Revised on 25 October 2022.

The discussion section is where you delve into the meaning, importance, and relevance of your results .

It should focus on explaining and evaluating what you found, showing how it relates to your literature review , and making an argument in support of your overall conclusion . It should not be a second results section .

There are different ways to write this section, but you can focus your writing around these key elements:

• Summary: A brief recap of your key results
• Interpretations: What do your results mean?
• Implications: Why do your results matter?
• Limitations: What can’t your results tell us?
• Recommendations: Avenues for further studies or analyses

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

What not to include in your discussion section, step 1: summarise your key findings, step 2: give your interpretations, step 3: discuss the implications, step 4: acknowledge the limitations, step 5: share your recommendations, discussion section example.

There are a few common mistakes to avoid when writing the discussion section of your paper.

• Don’t introduce new results: You should only discuss the data that you have already reported in your results section .
• Don’t make inflated claims: Avoid overinterpretation and speculation that isn’t directly supported by your data.
• Don’t undermine your research: The discussion of limitations should aim to strengthen your credibility, not emphasise weaknesses or failures.

Prevent plagiarism, run a free check.

Start this section by reiterating your research problem  and concisely summarising your major findings. Don’t just repeat all the data you have already reported – aim for a clear statement of the overall result that directly answers your main  research question . This should be no more than one paragraph.

Many students struggle with the differences between a discussion section and a results section . The crux of the matter is that your results sections should present your results, and your discussion section should subjectively evaluate them. Try not to blend elements of these two sections, in order to keep your paper sharp.

• The results indicate that …
• The study demonstrates a correlation between …
• This analysis supports the theory that …
• The data suggest  that …

The meaning of your results may seem obvious to you, but it’s important to spell out their significance for your reader, showing exactly how they answer your research question.

The form of your interpretations will depend on the type of research, but some typical approaches to interpreting the data include:

• Identifying correlations , patterns, and relationships among the data
• Discussing whether the results met your expectations or supported your hypotheses
• Contextualising your findings within previous research and theory
• Explaining unexpected results and evaluating their significance
• Considering possible alternative explanations and making an argument for your position

You can organise your discussion around key themes, hypotheses, or research questions, following the same structure as your results section. Alternatively, you can also begin by highlighting the most significant or unexpected results.

• In line with the hypothesis …
• Contrary to the hypothesised association …
• The results contradict the claims of Smith (2007) that …
• The results might suggest that x . However, based on the findings of similar studies, a more plausible explanation is x .

As well as giving your own interpretations, make sure to relate your results back to the scholarly work that you surveyed in the literature review . The discussion should show how your findings fit with existing knowledge, what new insights they contribute, and what consequences they have for theory or practice.

Ask yourself these questions:

• Do your results support or challenge existing theories? If they support existing theories, what new information do they contribute? If they challenge existing theories, why do you think that is?
• Are there any practical implications?

Your overall aim is to show the reader exactly what your research has contributed, and why they should care.

• These results build on existing evidence of …
• The results do not fit with the theory that …
• The experiment provides a new insight into the relationship between …
• These results should be taken into account when considering how to …
• The data contribute a clearer understanding of …
• While previous research has focused on  x , these results demonstrate that y .

Even the best research has its limitations. Acknowledging these is important to demonstrate your credibility. Limitations aren’t about listing your errors, but about providing an accurate picture of what can and cannot be concluded from your study.

Limitations might be due to your overall research design, specific methodological choices , or unanticipated obstacles that emerged during your research process.

Here are a few common possibilities:

• If your sample size was small or limited to a specific group of people, explain how generalisability is limited.
• If you encountered problems when gathering or analysing data, explain how these influenced the results.
• If there are potential confounding variables that you were unable to control, acknowledge the effect these may have had.

After noting the limitations, you can reiterate why the results are nonetheless valid for the purpose of answering your research question.

• The generalisability of the results is limited by …
• The reliability of these data is impacted by …
• Due to the lack of data on x , the results cannot confirm …
• The methodological choices were constrained by …
• It is beyond the scope of this study to …

Based on the discussion of your results, you can make recommendations for practical implementation or further research. Sometimes, the recommendations are saved for the conclusion .

Suggestions for further research can lead directly from the limitations. Don’t just state that more studies should be done – give concrete ideas for how future work can build on areas that your own research was unable to address.

• Further research is needed to establish …
• Future studies should take into account …
• Avenues for future research include …

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 25). How to Write a Discussion Section | Tips & Examples. Scribbr. Retrieved 20 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/discussion/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a results section | tips & examples, research paper appendix | example & templates, how to write a thesis or dissertation introduction.

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Departments and Units
• Majors and Minors
• LSA Course Guide
• LSA Gateway

Search: {{$root.lsaSearchQuery.q}}, Page {{$root.page}}

• Accessibility
• Undergraduates
• Instructors
• Alums & Friends

• ★ Writing Support
• Minor in Writing
• First-Year Writing Requirement
• Transfer Students
• Writing Guides
• Peer Writing Consultant Program
• Upper-Level Writing Requirement
• Writing Prizes
• International Students
• ★ The Writing Workshop
• Dissertation ECoach
• Fellows Seminar
• Dissertation Writing Groups
• Rackham / Sweetland Workshops
• Dissertation Writing Institute
• Guides to Teaching Writing
• Teaching Support and Services
• Support for FYWR Courses
• Support for ULWR Courses
• Writing Prize Nominating
• Alums Gallery
• Commencement
• Giving Opportunities
• How Do I Present Findings From My Experiment in a Report?
• How Do I Make Sure I Understand an Assignment?
• How Do I Decide What I Should Argue?
• How Can I Create Stronger Analysis?
• How Do I Effectively Integrate Textual Evidence?
• How Do I Write a Great Title?
• What Exactly is an Abstract?
• What is a Run-on Sentence & How Do I Fix It?
• How Do I Check the Structure of My Argument?
• How Do I Write an Intro, Conclusion, & Body Paragraph?
• How Do I Incorporate Quotes?
• How Can I Create a More Successful Powerpoint?
• How Can I Create a Strong Thesis?
• How Can I Write More Descriptively?
• How Do I Incorporate a Counterargument?
• How Do I Check My Citations?

See the bottom of the main Writing Guides page for licensing information.

Many believe that a scientist’s most difficult job is not conducting an experiment but presenting the results in an effective and coherent way. Even when your methods and technique are sound and your notes are comprehensive, writing a report can be a challenge because organizing and communicating scientific findings requires patience and a thorough grasp of certain conventions. Having a clear understanding of the typical goals and strategies for writing an effective lab report can make the process much less troubling.

General Considerations

It is useful to note that effective scientific writing serves the same purpose that your lab report should. Good scientific writing explains:

• The goal(s) of your experiment
• How you performed the experiment
• The results you obtained
• Why these results are important

While it’s unlikely that you’re going to win the Nobel Prize for your work in an undergraduate laboratory course, tailoring your writing strategies in imitation of professional journals is easier than you might think, since they all follow a consistent pattern. However, your instructor has the final say in determining how your report should be structured and what should appear in each section. Please use the following explanations only to supplement your given writing criteria, rather than thinking of them as an indication of how all lab reports must be written.

In Practice

The Structure of a Report

The traditional experimental report is structured using the acronym “IMRAD” which stands for I ntroduction, M ethods, R esults and D iscussion. The “ A ” is sometimes used to stand for A bstract. For help writing abstracts, please see Sweetland’s resource entitled “What is an abstract, and how do I write one?”

Introduction: “What am I doing here?” The introduction should accomplish what any good introduction does: draw the reader into the paper. To simplify things, follow the “inverted pyramid” structure, which involves narrowing information from the most broad (providing context for your experiment’s place in science) to the most specific (what exactly your experiment is about). Consider the example below.

Most broad: “Caffeine is a mild stimulant that is found in many common beverages, including coffee.”

Less broad: “Common reactions to caffeine use include increased heart rate and increased respiratory rate.”

Slightly more specific (moving closer to your experiment): Previous research has shown that people who consume multiple caffeinated beverages per day are also more likely to be irritable.

Most specific (your experiment): This study examines the emotional states of college students (ages 18-22) after they have consumed three cups of coffee each day.

See how that worked? Each idea became slightly more focused, ending with a brief description of your particular experiment. Here are a couple more tips to keep in mind when writing an introduction:

• Include an overview of the topic in question, including relevant literature A good example: “In 1991, Rogers and Hammerstein concluded that drinking coffee improves alertness and mental focus (citation 1991).
• Explain what your experiment might contribute to past findings A good example: “Despite these established benefits, coffee may negatively impact mood and behavior. This study aims to investigate the emotions of college coffee drinkers during finals week.”
• Keep the introduction brief There’s no real advantage to writing a long introduction. Most people reading your paper already know what coffee is, and where it comes from, so what’s the point of giving them a detailed history of the coffee bean? A good example: “Caffeine is a psychoactive stimulant, much like nicotine.” (Appropriate information, because it gives context to caffeine—the molecule of study) A bad example: “Some of the more popular coffee drinks in America include cappuccinos, lattés, and espresso.” (Inappropriate for your introduction. This information is useless for your audience, because not only is it already familiar, but it doesn’t mention anything about caffeine or its effects, which is the reason that you’re doing the experiment.)
• Avoid giving away the detailed technique and data you gathered in your experiment A good example: “A sample of coffee-drinking college students was observed during end-of-semester exams.” ( Appropriate for an introduction ) A bad example: “25 college students were studied, and each given 10oz of premium dark roast coffee (containing 175mg caffeine/serving, except for Folgers, which has significantly lower caffeine content) three times a day through a plastic straw, with intervals of two hours, for three weeks.” ( Too detailed for an intro. More in-depth information should appear in your “Methods” or “Results” sections. )

Methods: “Where am I going to get all that coffee…?”

A “methods” section should include all the information necessary for someone else to recreate your experiment. Your experimental notes will be very useful for this section of the report. More or less, this section will resemble a recipe for your experiment. Don’t concern yourself with writing clever, engaging prose. Just say what you did, as clearly as possible. Address the types of questions listed below:

• Where did you perform the experiment? (This one is especially important in field research— work done outside the laboratory.)
• How much did you use? (Be precise.)
• Did you change anything about them? (i.e. Each 5 oz of coffee was diluted with 2 oz distilled water.)
• Did you use any special method for recording data? (i.e. After drinking coffee, students’ happiness was measured using the Walter Gumdrop Rating System, on a scale of 1-10.)
• Did you use any techniques/methods that are significant for the research? (i.e. Maybe you did a double blinded experiment with X and Y as controls. Was your control a placebo? Be specific.)
• Any unusual/unique methods for collecting data? If so, why did you use them?

After you have determined the basic content for your “methods” section, consider these other tips:

• Decide between using active or passive voice

There has been much debate over the use of passive voice in scientific writing. “Passive voice” is when the subject of a sentence is the recipient of the action.

• For example: Coffee was given to the students.

“Active voice” is when the subject of a sentence performs the action.

• For example: I gave coffee to the students.

The merits of using passive voice are obvious in some cases. For instance, scientific reports are about what is being studied, and not about YOU. Using too many personal pronouns can make your writing sound more like a narrative and less like a report. For that reason, many people recommend using passive voice to create a more objective, professional tone, emphasizing what was done TO your subject. However, active voice is becoming increasingly common in scientific writing, especially in social sciences, so the ultimate decision of passive vs. active voice is up to you (and whoever is grading your report).

• Units are important When using numbers, it is important to always list units, and keep them consistent throughout the section. There is a big difference between giving someone 150 milligrams of coffee and 150 grams of coffee—the first will keep you awake for a while, and the latter will put you to sleep indefinitely. So make sure you’re consistent in this regard.
• Don’t needlessly explain common techniques If you’re working in a chemistry lab, for example, and you want to take the melting point of caffeine, there’s no point saying “I used the “Melting point-ometer 3000” to take a melting point of caffeine. First I plugged it in…then I turned it on…” Your reader can extrapolate these techniques for him or herself, so a simple “Melting point was recorded” will work just fine.
• If it isn’t important to your results, don’t include it No one cares if you bought the coffee for your experiment on “3 dollar latte day”. The price of the coffee won’t affect the outcome of your experiment, so don’t bore your reader with it. Simply record all the things that WILL affect your results (i.e. masses, volumes, numbers of trials, etc).

Results: The only thing worth reading?

The “results” section is the place to tell your reader what you observed. However, don’t do anything more than “tell.” Things like explaining and analyzing belong in your discussion section. If you find yourself using words like “because” or “which suggests” in your results section, then STOP! You’re giving too much analysis.

A good example: “In this study, 50% of subjects exhibited symptoms of increased anger and annoyance in response to hearing Celine Dion music.” ( Appropriate for a “results” section—it doesn’t get caught up in explaining WHY they were annoyed. )

In your “results” section, you should:

• Display facts and figures in tables and graphs whenever possible. Avoid listing results like “In trial one, there were 5 students out of 10 who showed irritable behavior in response to caffeine. In trial two…” Instead, make a graph or table. Just be sure to label it so you can refer to it in your writing (i.e. “As Table 1 shows, the number of swear words spoken by students increased in proportion to the amount of coffee consumed.”) Likewise, be sure to label every axis/heading on a chart or graph (a good visual representation can be understood on its own without any textual explanation). The following example clearly shows what happened during each trial of an experiment, making the trends visually apparent, and thus saving the experimenter from having to explain each trial with words.
• Identify only the most significant trends. Don’t try to include every single bit of data in this section, because much of it won’t be relevant to your hypothesis. Just pick out the biggest trends, or what is most significant to your goals.

Discussion: “What does it all mean?”

The “discussion” section is intended to explain to your reader what your data can be interpreted to mean. As with all science, the goal for your report is simply to provide evidence that something might be true or untrue—not to prove it unequivocally. The following questions should be addressed in your “discussion” section:

• Is your hypothesis supported? If you didn’t have a specific hypothesis, then were the results consistent with what previous studies have suggested? A good example: “Consistent with caffeine’s observed effects on heart rate, students’ tendency to react strongly to the popping of a balloon strongly suggests that caffeine’s ability to heighten alertness may also increase nervousness.”
• Was there any data that surprised you? Outliers are seldom significant, and mentioning them is largely useless. However, if you see another cluster of points on a graph that establish their own trend, this is worth mentioning.
• Are the results useful? If you have no significant findings, then just say that. Don’t try to make wild claims about the meanings of your work if there is no statistical/observational basis for these claims—doing so is dishonest and unhelpful to other scientists reading your work. Similarly, try to avoid using the word “proof” or “proves.” Your work is merely suggesting evidence for new ideas. Just because things worked out one way in your trials, that doesn’t mean these results will always be repeatable or true.
• What are the implications of your work? Here are some examples of the types of questions that can begin to show how your study can be significant outside of this one particular experiment: Why should anyone care about what you’re saying? How might these findings affect coffee drinkers? Do your findings suggest that drinking coffee is more harmful than previously thought? Less harmful? How might these findings affect other fields of science? What about the effects of caffeine on people with emotional disorders? Do your findings suggest that they should or should not drink coffee?
• Any shortcomings of your work? Were there any flaws in your experimental design? How should future studies in this field accommodate for these complications. Does your research raise any new questions? What other areas of science should be explored as a result of your work?

Resources: Hogg, Alan. "Tutoring Scientific Writing." Sweetland Center for Writing. University of Michigan, Ann Arbor. 3/15/2011. Lecture. Swan, Judith A, and George D. Gopen. "The Science of Scientific Writing." American Scientist . 78. (1990): 550-558. Print. "Scientific Reports." The Writing Center . University of North Carolina, n.d. Web. 5 May 2011. http://www.unc.edu/depts/wcweb/handouts/lab_report_complete.html

• Information For
• Prospective Students
• Current Students
• Faculty and Staff
• Alumni and Friends
• More about LSA
• How Do I Apply?
• LSA Magazine
• Student Resources
• Academic Advising
• Global Studies
• LSA Opportunity Hub
• Social Media
• Update Contact Info
• Privacy Statement
• Report Feedback