abstract thesis phd

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me 🙂 Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

17 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism, run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 2 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

How to Write a Thesis Abstract

Just when you thought you’d almost finished your thesis, there’s yet another hurdle: the abstract. Although it’s only around 300 words, this chunk of text can be surprisingly challenging. And you don’t want any more challenges at this stage. In this post, I’ll explain the purpose of the thesis abstract and also provide a step-by-step guide on how to distil that monster thesis into a perfect summary.

What’s the purpose of the thesis abstract?

Other than giving you an unwelcome task on your todo list, the thesis abstract serves two main purposes:

• To entice prospective PhD examiners – when your university is recruiting academics to examine your thesis, they’ll receive a copy of your abstract. This is why you’re required to provide an abstract when you signal your intention to submit. A potential examiner can then decide whether your topic is relevant and of interest. Examiners aren’t in it for the money – they often agree to examine a thesis because they want to find out about new research in their field. You need to pique their curiosity! That doesn’t mean teasing them with juicy clues about what they might discover, but clearly stating what your research is about and why it’s important.
• To entice readers – once your thesis is sitting proudly in your university’s online repository, you want people to read and cite it. After all, you’ve worked very hard on making your contribution to knowledge. Your readers’ initial encounter will be the abstract. They’ll be skimming this briefly to see whether your ~80,000 words are worth the investment of their time. You have just 300 words to convince them. And these people could be important. Perhaps they’re future employers, publishers, collaborators, or funders.

There’s a good chance your abstract might shift slightly in response to your viva and any subsequent questions. In which case, you can update the abstract that’s included with the final version of your thesis.

How do you structure a thesis abstract?

Well, it depends partly on your discipline and topic. Broadly, though, this is how it might break down:

• This is the problem / limitation / gap – the originality of your project (1-2 sentences)
• This is why it’s important – the significance of your contribution to the field (2-3 sentences)
• This is how I did it – explaining your methodology (1 sentence)
• This is what I found – summarise your chapters, but don’t refer to them by number (1 sentence for each)
• This is what it means – describe the impact of your findings (2 sentences)
• These are the implications – and how it will change your field (1 sentence)

It’s following the pattern of why , what , how , and then why again

The why question is absolutely pivotal to your thesis.

Unlike the blurb on a novel, you do want to give away the plot. Your examiners and readers aren’t looking for surprises – they want to find out the ending in advance and then follow your path towards it.

And don’t cheat by stuffing your abstract with quotes from other authors – they should live in your literature review. The abstract is all about your research.

• Check the regulations at your university – what’s the required word count and format? Is there any particular style you’re expected to follow?
• Take a look at some recent abstracts in your field. They should be easily accessible through your university repository. Remember, these aren’t necessarily good examples, though, so engage your critical eye.
• Experiment with a few different versions of your abstract. As you’ll know through bitter experience, it’s much harder to write succinctly than to produce pages of waffle. Start with a long version then gradually distil it down into a beautifully-crafted nugget.

Once you’ve squeezed out your abstract, you might even have a clearer idea of your thesis. This will help enormously with your viva, although that’s a challenge for another day.

Leave a comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Privacy Overview
• Strictly Necessary Cookies
• Cookie Policy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. Found out more in our privacy policy .

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.

More information about our Cookie Policy

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to write a dissertation abstract, published by steve tippins on may 25, 2020 may 25, 2020.

Last Updated on: 3rd June 2022, 04:27 am

The abstract is where you “sell” your dissertation. In over 95% of the cases, the first thing people see will be your dissertation’s abstract. If others (such as potential employers or fellow researchers) are going to be looking at your dissertation, you have to get their interest in the abstract. 

How do you get people’s interest? Think about what you wanted to know when you were searching, and that’s what needs to be in the abstract (in addition to anything that your school requires). 

Normally dissertation abstracts are a page or less. You’ll want to include the problem you were looking at, the questions you wanted to answer, and the methodology you used. Also include what you found and what it means (the implications). For a more in-depth explanation of what to include, see the sample outline below.

Advice for Writing a Dissertation Abstract

Every word is important in a dissertation abstract. Because the space you have is so limited, you want to make sure that every word and phrase helps the reader understand what they’re going to gain when they read the entire document. On the other hand, you don’t want to put everything in the abstract because you want them to read the actual paper.

Avoid the temptation to make it more than a page long. The truth is, people aren’t going to read a multiple-page abstract, which means they won’t read your dissertation. Don’t think of it as condensing 100+ pages of material down into one page. Rather, think of it as giving an introduction to what is contained in the pages of your dissertation.

Some schools have a rubric to follow. If they do have one, follow it to the letter. This will save you time and help you please your committee more easily. There’s also usually a good reason behind the requirements they set out, so it will improve the quality of your abstract overall.

While it takes a certain artfulness to be concise, the abstract should be a relatively easy section to write. Basically, you just have to tell people what you did. You don’t need to report any new information or do anything you haven’t already done while writing your dissertation.

Dissertation Abstract Sample Outline

Traditionally, abstracts are less than a page in length, are not indented, and contain no citations. While different universities may have slightly different requirements, most want to see some variation of the following:

• Introduce the study topic and articulate the research problem.
• State the purpose of the study
• State the research method 
• Concisely describe the overall research design, methods, and data analysis procedures.
• Identify the participants.
• Present key results 
• Outline conclusions and recommendations

What Comes After Writing Your Dissertation Abstract?

Writing your dissertation abstract means you’ve completed your study. Congratulations! As you move through the final phases of getting your degree and into your new career path, you may need support navigating today’s competitive job market. 

Academic jobs are more competitive than ever, and starting your own business is best done with the guidance of someone who’s done it before. Take a look at my academic career coaching services and book a free 30-minute consultation .

If you’re still working on your dissertation, I also offer dissertation coaching and dissertation editing services.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

What makes a good research question.

Creating a good research question is vital to successfully completing your dissertation. Here are some tips that will help you formulate a good research question.  What Makes a Good Research Question? These are the three Read more…

Dissertation Structure

When it comes to writing a dissertation, one of the most fraught questions asked by graduate students is about dissertation structure. A dissertation is the lengthiest writing project that many graduate students ever undertake, and Read more…

Choosing a Dissertation Chair

Choosing your dissertation chair is one of the most important decisions that you’ll make in graduate school. Your dissertation chair will in many ways shape your experience as you undergo the most rigorous intellectual challenge Read more…

Make This Your Last Round of Dissertation Revision.

Learn How to Get Your Dissertation Accepted .

Discover the 5-Step Process in this Free Webinar .

Almost there!

Please verify your email address by clicking the link in the email message we just sent to your address.

If you don't see the message within the next five minutes, be sure to check your spam folder :).

Hack Your Dissertation

5-Day Mini Course: How to Finish Faster With Less Stress

Interested in more helpful tips about improving your dissertation experience? Join our 5-day mini course by email!

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

How to Write a Thesis Abstract?

A thesis abstract is a broad outline of the whole essay or dissertation consisting of important information and crucial points at the beginning of the dissertati on within a few hundred words.

PhD thesis is one among the many important criteria to award the degree and so it needs precise, concise, professional and academic writing . You can’t get a PhD until you publish your thesis. And… trust me the process is lengthy, frustrating and time-consuming.

The ideal thesis has an introduction, Review of Literature, Materials & Methods, Results and Discussion, Conclusion and References. These chapters must be there in every dissertation. 

Besides, other elements of the thesis are the Table of Contents , Acknowledgment page, Abstract of the thesis and other important pages. A thesis must have every part and that must be written correctly. 

In the present blog article, I will explain to you the importance of one of the thesis elements that is “abstract” or dissertation/thesis abstract. I will also let you know how to write it and how to make it more effective. 

Definition: 

The abstract page, thesis abstract tense:, examples of abstract:, how to write thesis abstract, wrapping up: , faqs: , what is a thesis abstract .

Every thesis should have an abstract page, even research papers too, consist it at the beginning of the article. So probably it is important, isn’t it!

First, understand, suppose you are organizing a party and ordering food. What if the chef offers testing each food item before ordering? That makes sense, right!

A  dissertation abstract is a summarized piece of content that serves important points and information of your thesis at the beginning. Meaning, readers or evaluators may understand what information they will get from this assay. 

Remember! A bad ‘abstract’ can spoil your reputation from starting while a strong thesis abstract convinces readers to go through the assay and therefore precise writing is a must. 

An abstract has summarised information of what, how and why should the research be conducted. Every thesis, dissertation, project report or research paper ideally has an abstract. 

The abstract explains

• The clear motto of findings
• The main aim of the thesis 
• Gap or problem in existing research
• Your findings and outcomes with respect to it 
• The method or a technique used 
• Your major results 
• final interpretation

And most importantly, all must be within a few hundred words! 

By definition, an abstract is a summary of the thesis including key research findings and important information in approx. 300 words. 

“ A few sentences that give the main ideas in an article or a scientific paper ” Definition of Abstract by Cambridge English Dictionary, 

An abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”. Definition of Abstract by Collins English Dictionary

Abstract format: 

You have to rewrite your entire 60,000 words thesis in just a few hundred words, that’s a pretty tough task, right! Don’t worry at the end of this article, it’ll become easier for you. 

One or two pages long abstract isn’t acceptable. You need to write an abstract in a well-defined format. An ideal abstract has 150 to 200 words for a master’s project or dissertation while 250 to 350 words for a PhD thesis. 

It should not exceed more than 500 words, note it down, though it shouldn’t have an impact on thesis acceptance or rejection. The examiner would estimate the number of words by its length. 

The ideal summary/ abstract has information like,

• Introduction or background of the topic
• Aim and problem of the research
• Materials and methods 
• Results and interpretation. 

Write everything in short sentences, you have several sentences to justify your work. Avoid citation & references, long paragraphs and sentences in this section.

Now after observing the format, you may wonder that citation and references are the key elements of the thesis, why avoid this here?

See, an abstract is just an outlook of your work, that creates curiosity in readers and hence keep it short and concise. In order to avoid the complexing and length, unnecessary thighs are excluded. 

The location of the abstract page is also as important as other things. A separate ‘ abstract page ’ is included before the Table of Contents and after the Title and acknowledgments page. The chronological order is like this,

• Acknowledgment
• Thesis Abstract
• List of Figures
• List of Tables
• List of Abbreviations
• Table of Contents
• Introduction
• Review of Literature
• Materials and Methods
• Results and Discussion

Note that you should write the abstract after the end of all writing but do not copy some random paragraphs or sentences from all the chapters. It’s an independent, short, succinct and accurate segment. 

Use two types of tenses to write the abstract; Simple Present Tense and Simple Past Tense. 

Understand that this section has two types of information: first- background, introduction, statistics, objectives and findings (results and interpretation) and second- methodology and findings. 

So to write background, introduction, statistics, explanation or objective and interpretation use the Simple Present Tense . While explaining your methodology and technique use Simple Past Tense . 

Let us see some examples, 

❌ The present study will find if the DNA is a nucleic acid or not (False).  ✔️ The present study finds if the DNA is a nucleic acid or not (True). 

❌ DNA was a type of nucleic acid present in a cell (False). ✔️ DNA is a type of nucleic acid present in a cell (True). 

❌ 100 patients will be selected for the present study (False). ✔️ 100 patients were selected for the present study (True). 

❌ Our results have concluded that the DNA is helical in structure (False). ✔️ Our results conclude that the DNA is helical in structure (True). 

❌ The present study concluded that the DNA has four bases joined by hydrogen bonds (False). ✔️ The present study concludes that the DNA has four bases joined by hydrogen bonds (True).

Thesis abstract sample: 

The Beta- Globin gene has many mutations including SNPs, deletions, duplications or translocations, however, not all are associated with Beta-Thalassemia. Beta-Thalassemia is a condition of blood anemia, symptoms are seen in Beta-Thalassemia major but not in the Beta-Thalassemia carrier. Per 1,00,000 live births, 111.91 are Beta-Thalassemia major/minor. The present study shows the relationship of IVS (1-5) mutation with Beta-Thalassemia. 

100 patients were selected for the present study. The PCR RFLP technique was used to investigate the mutation along with the agarose gel electrophoresis. The final results and statistical analysis were performed using the computational tools. Our findings show that out of 100 patients, the IVS(1-5) mutation is detected in 18 patients of which 3 are Beta-Thalassemia major and the rest are Beta-Thalassemia minor. It also indicates that other mutations may be involved but ain’t included in the present study. 

From our study, we conclude that the IVS(1-5) mutation has an 18% prevalence in Beta-Thalassemia. Further studies are required to find more mutations associated.  

Keywords- Beta-Thalassemia, IVS(1-5) mutation and PCR-RFLP. 

At the end of the abstract do not forget to add keywords so that other researchers can find your article. Note that some publications have their own style to write the abstract. In that case, we have to follow a specific format given by the journal or publishing house. 

Here we have given several examples of abstracts: 

Example 2 

Example 3 

 Write error-free:

While executing such a long project (the thesis) students usually ignore common English errors and forget to correct them. So the first thing you have to do is correct all your grammar, spelling, punctuation and sentence structure errors. 

 I know it’s a bit of a difficult task, but don’t worry. 

You can use Grammarly premium to autocorrect all the things! You can also use the free version but Premium will help you even more, so I personally recommend it. 

It underlines and autocorrects all the grammatical and spelling mistakes. Download Grammarly from here: 

Or you can read our previous article to explore more features. Read it here: Grammarly: Your PhD writing assistant .

We can earn some commission if you signup for free or Buy a Premium version of Grammarly by our affiliate link. That helps us a bit to write quality content.

Do not copy: 

As I said earlier, do not copy your own sentences from your thesis. It doesn’t make sense! You should have to write the abstract at the end of your writing. If you have performed things well, you can easily write 300 words from your entire work. 

That’s indeed easy. However, go through the checklist (somewhere given in the article) of what to include and what not to include. 

Use concise sentences and appropriate words: 

As it’s 300 words powerpack, every word you use is certainly important. Avoid repetitive words, write to the point and use the correct ‘Tense’ (go to the above section of this article and read which Tense to use when). Write short sentences. 

Keep in mind that whatever you write here must be there in your thesis. Even though you have some other findings, if you haven’t included it in your thesis, do not write it in the abstract to attract readers. 

Formal writing style: 

Use a proper, scientific or academic writing style. Do not write like you are writing a blog post. Use passive voice correctly, if required. Avoid unnecessary lines and words. 

Use a clean style and avoid using numbers, bullet underlines or bold text even if you think it is required. Use the font style you used for the rest of the assay. Use the same text type, font size and color. 

Use some information not all: 

I know the results and outcomes are way more than what you want to include in the abstract. But do not use all information, write only some important findings in a few lines. Use only a few statists and avoid tables or whole lists. 

For example, our findings suggest that IVS(1-5) mutation is present in 18% of the Beta-thalassemia patients, that’s it.   

Do not give special attention to the abstract, though write effectively. In summary, avoid a citation, referencing, author names, bullets, numbering, underlines etc. Use a bit of every chapter. 

Remember, your first impression is your last impression. I hope this article will help you in creating an excellent abstract page for your thesis.

Where is the abstract located? 

The abstract is present after the Table of Contents and before the acknowledgment and title page. 

How long is the thesis or paper abstract? 

The abstract of the thesis is usually 250 to 300 words long, however, some also prefer 500 words. 

Are references and citations included in the abstract? 

No. The abstract is the only piece of information in our thesis or paper that lacks citation and references. 

Why is the abstract required? 

The abstract is the short summary, placed at the beginning of the thesis that provides brief information on the dissertation. 

What is included in the abstract?

• Motivation, Problem of the research, approach, outcomes and interpretation which is background information, objective, technique or methods, results and conclusion, respectively.

What is not included in the abstract? 

• In line citation
• Name of other authors 
• Numering, bullets and underlines

Dr. Tushar Chauhan is a Scientist, Blogger and Scientific-writer. He has completed PhD in Genetics. Dr. Chauhan is a PhD coach and tutor.

Share this:

• Share on Facebook
• Share on Twitter
• Share on Pinterest
• Share on Linkedin
• Share via Email

About The Author

Dr Tushar Chauhan

Related posts.

What is PhD?- History, Definition, Origin, Requirement, Fees, Duration and Process

How to write a PhD thesis?

Leave a comment cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Notify me of follow-up comments by email.

Notify me of new posts by email.

Research Voyage

Research Tips and Infromation

How to Write Abstract Section for Your Dissertation or Thesis ?

Introduction

A. length requirements and guidelines, b. key components of an abstract, a. writing concisely and clearly, b. structuring the abstract in a logical manner, c. incorporating the essentials for each component of the abstract, a. reviewing and revising the initial draft, b. eliminating jargon and technical terms, c. ensuring coherence and clarity, d. proofreading for grammar, spelling, and typos, a. importance of getting input from advisors and colleagues, b. incorporating feedback to refine the abstract, c. addressing any concerns or questions raised by reviewers.

An abstract is a concise summary that captures the essence of your PhD or Post Graduate dissertation. It provides readers with a snapshot of your research topic, methodology, findings, and implications. Think of it as a condensed version of your entire dissertation, where you distil the most important aspects of your work into a brief yet informative summary. The abstract serves as a quick reference for readers who want to grasp the key points of your research without delving into the full dissertation.

A well-written abstract holds significant importance for your thesis. It serves as a powerful tool to attract the attention of potential readers, such as academic colleagues, researchers, and professionals in your field. It is often the first impression they have of your research work. A well-crafted abstract can entice readers to delve deeper into your dissertation, while a poorly written abstract may fail to convey the significance and novelty of your research.

A compelling abstract not only captures the essence of your research but also showcases the value and impact of your findings. It allows readers to quickly assess whether your research aligns with their own interests and needs. Moreover, a well-constructed abstract can serve as a standalone piece that can be cited and referenced by others, increasing the visibility and reach of your work.

In this blog post, we will explore the step-by-step process of writing an abstract for your PhD dissertation. We will discuss the key components that should be included, offer tips for crafting a compelling abstract, and provide guidance on polishing and seeking feedback to ensure its effectiveness.

By understanding the definition and purpose of an abstract, recognizing its importance, and having an overview of the upcoming steps, you can approach the task of writing an abstract for your dissertation with clarity and purpose.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Understanding the Basics

When it comes to the length of an abstract for a dissertation, it typically ranges from 150 to 350 words. However, it’s essential to consult the specific guidelines provided by your university or department, as requirements may vary. Adhering to the prescribed word limit ensures that your abstract remains concise and focused, effectively summarizing the key aspects of your research.

• Background and research problem

The background and research problem section of the abstract introduces the context and motivation behind your study. This may involve explaining the significance of a specific problem or identifying a gap in existing knowledge that your research aims to address. For example:

“The proliferation of internet-connected devices has led to an exponential increase in data generated, raising concerns about efficient data storage and processing. This study addresses the problem of scalable data management in distributed systems by proposing a novel indexing algorithm that improves query performance.”

• Objectives and methodology

In this component, you outline the objectives or aims of your research and briefly describe the methodology employed. This may involve mentioning the specific algorithms, frameworks, or techniques utilized. Example:

“The primary objective of this study is to develop a machine learning-based intrusion detection system capable of identifying network attacks in real-time. To achieve this, a deep learning architecture incorporating a convolutional neural network (CNN) and long short-term memory (LSTM) units is implemented and trained on a large dataset of network traffic.”

• Results or findings

Here, you summarize the key results or findings of your research. This could include metrics, performance evaluations, or comparisons with existing methods. For instance:

“The proposed intrusion detection system achieved an average accuracy of 95% on a benchmark dataset, outperforming existing rule-based and anomaly detection approaches. Moreover, it exhibited robustness to new and previously unseen attack types, demonstrating its potential for real-world deployment.”

• Implications and contributions

This component highlights the implications of your findings and the contributions your research makes to the field. It may involve discussing how your work advances existing knowledge or addresses practical challenges. Example:

“The development of an accurate and efficient intrusion detection system has significant implications for securing computer networks, protecting sensitive information, and mitigating cyber threats. This research contributes to the advancement of network security by providing a machine learning-based approach that enhances the detection and response capabilities of organizations.”

• Scope and limitations

In this section, you briefly mention the scope of your study and any limitations or constraints you encountered during your research. It helps readers understand the boundaries of your work and the factors that may impact the generalizability of your findings. For example:

“While this study focused on a specific network topology and traffic pattern, the proposed intrusion detection system can be adapted to different network configurations. However, it is important to note that the system’s performance may vary depending on network size and traffic volume.”

The conclusion of your abstract summarizes the main takeaways from your research. It reinforces the significance of your findings and emphasizes the relevance of your work in the broader context.

“In conclusion, this study presents a machine learning-based intrusion detection system that demonstrates superior performance and scalability compared to traditional methods. The proposed approach has the potential to enhance network security and contribute to the development of more robust and adaptive defense mechanisms.”

By incorporating these key components into your abstract and tailoring them to your specific research, you can effectively convey the essence of your work to readers and highlight its contributions and significance.

Crafting a Compelling Abstract

Writing concisely and clearly is crucial when crafting an abstract for a thesis. Use precise and concise language to convey your ideas effectively. Avoid unnecessary jargon or technical terms that may hinder understanding.

Organize your abstract into distinct sections, each addressing a specific component of your research. This logical structure ensures that readers can easily follow the flow of information, from the background and research problem to the conclusion and implications.

Provide a concise overview of the challenges and significance of the problem you are tackling. For instance, if you are developing a recommendation system, briefly explain the increasing need for personalized recommendations in e-commerce platforms due to the vast amount of available products and user preferences.

Clearly articulate the specific goals or objectives of your research. For example, if you are developing a new algorithm, state the aim of improving efficiency or accuracy. Additionally, briefly mention the methodologies or techniques you used, such as data collection, algorithm design, or statistical analysis.

Highlight the main outcomes or discoveries resulting from your research. This may include performance metrics, experimental results, or comparisons with existing methods. For instance, if you have developed a machine learning model, mention the achieved accuracy, precision, or recall, showcasing its effectiveness.

Emphasize the broader implications of your research and its potential impact. For example, if your work introduces a novel algorithm, highlight how it improves computational efficiency or enables new applications. Additionally, emphasize how your research contributes to existing knowledge, fills a research gap, or opens up new avenues for future research.

Provide a clear understanding of the boundaries of your study. Mention any specific datasets, experimental conditions, or assumptions made. Additionally, address the limitations or challenges you faced, such as data availability, time constraints, or sample size limitations.

Conclude your abstract by summarizing the main takeaways and emphasizing the significance of your research.

“In conclusion, this study presents a novel algorithm for recommendation systems that significantly improve recommendation accuracy. The proposed approach has the potential to enhance user experience and increase customer satisfaction in e-commerce platforms. By addressing the limitations of existing methods and achieving superior performance, this research contributes to the advancement of personalized recommendation algorithms.”

By following these tips and tailoring them to your specific research domain, you can craft a compelling abstract that effectively communicates the essence and significance of your work.

Polishing Your Abstract

After writing the initial draft of your abstract, take the time to review and revise it. This step allows you to refine your ideas and ensure that the abstract accurately represents your research. Read through your abstract with a critical eye, considering the clarity and coherence of your writing. Look for areas where you can improve the flow of information and strengthen the overall structure of your abstract.

While it’s essential to demonstrate your expertise in the domain, avoid using excessive jargon and technical terms in your abstract. Opt for clear and accessible language that can be easily understood by a wider audience. Avoid overwhelming readers with technical terms or specialized jargon that may hinder their understanding. Instead, strive for clarity and simplicity in your language while conveying the key concepts and ideas of your research.

Ensure that your abstract maintains coherence and clarity throughout. Each sentence and paragraph should flow smoothly, allowing readers to grasp the main points of your research effortlessly. Check for coherence and logical progression in your abstract. Each sentence should build upon the previous one, leading readers through a clear and coherent narrative. Use appropriate transition words and phrases to guide readers through the different components of your abstract.

Before finalizing your abstract, thoroughly proofread it for grammar, spelling, and typographical errors. Even minor mistakes can detract from the overall quality and professionalism of your abstract.

Take the time to carefully proofread your abstract for any grammatical errors, spelling mistakes, or typos. These seemingly small errors can undermine the credibility of your research. Consider using grammar and spell-checking tools or asking a colleague to review your abstract for an extra pair of eyes.

By engaging in a comprehensive review and revision process, eliminating jargon, ensuring coherence and clarity, and conducting meticulous proofreading, you can polish your abstract to a high standard. This level of refinement enhances the overall quality of your abstract and increases its impact on readers.

Seeking Feedback

It is crucial to seek input and feedback from your advisors and colleagues when finalizing your abstract. Their expertise and perspectives can provide valuable insights and help improve the overall quality of your abstract.

“Consulting with your advisors and colleagues is essential as they can offer valuable guidance and expertise. They can provide feedback on the clarity of your abstract, the effectiveness of your communication, and the alignment of your abstract with the goals of your research.”

Once you receive feedback, carefully consider the suggestions and recommendations provided. Use this feedback as an opportunity to refine and strengthen your abstract, ensuring that it accurately represents your research. Take the feedback you receive and evaluate how it aligns with your research objectives. Incorporate constructive suggestions to improve the clarity, organization, and coherence of your abstract. By iteratively refining your abstract based on feedback, you can enhance its overall effectiveness.

If you submit your abstract for review, reviewers may raise concerns or have questions regarding certain aspects of your research. It is important to address these concerns and provide clarifications in your abstract. If reviewers raise specific concerns or questions about your research, address them in your abstract. For example, if a reviewer questions the scalability of your proposed algorithm, you can emphasize the efficiency and scalability features in the methodology section of your abstract. This helps ensure that your abstract provides satisfactory answers and alleviates any potential doubts or reservations.

By actively seeking feedback, incorporating constructive suggestions, and addressing concerns raised by reviewers, you can refine your abstract and make it more compelling and effective. This iterative feedback process ensures that your abstract accurately represents your research and maximizes its impact on the intended audience.

In conclusion, a well-written abstract holds significant importance for your PhD or Post Graduate thesis. It serves as the gateway to your research, capturing the attention of potential readers and conveying the essence and significance of your work. It is often the first impression that readers have of your research, and a well-crafted abstract can entice them to explore your dissertation further. Therefore, investing time and effort into crafting a compelling abstract is crucial for effectively communicating the value of your research.

Upcoming Events

• Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
• Visit for  Research Internships Worldwide

Recent Posts

• How to Request for Journal Publishing Charge (APC) Discount or Waiver?
• Do Review Papers Count for the Award of a PhD Degree?
• Vinay Kabadi, University of Melbourne, Interview on Award-Winning Research
• Do You Need Publications for a PhD Application? The Essential Guide for Applicants
• Research Internships @ Finland
• All Blog Posts
• Research Career
• Research Conference
• Research Internship
• Research Journal
• Research Tools
• Uncategorized
• Research Conferences
• Research Journals
• Research Grants
• Internships
• Research Internships
• Email Templates
• Conferences
• Blog Partners
• Privacy Policy

Copyright © 2024 Research Voyage

Design by ThemesDNA.com

Tips for writing a PhD dissertation: FAQs answered

From how to choose a topic to writing the abstract and managing work-life balance through the years it takes to complete a doctorate, here we collect expert advice to get you through the PhD writing process

Campus team

Additional links.

• More on this topic

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} Emotions and learning: what role do emotions play in how and why students learn?

A diy guide to starting your own journal, universities, ai and the common good, artificial intelligence and academic integrity: striking a balance, create an onboarding programme for neurodivergent students.

Embarking on a PhD is “probably the most challenging task that a young scholar attempts to do”, write Mark Stephan Felix and Ian Smith in their practical guide to dissertation and thesis writing. After years of reading and research to answer a specific question or proposition, the candidate will submit about 80,000 words that explain their methods and results and demonstrate their unique contribution to knowledge. Here are the answers to frequently asked questions about writing a doctoral thesis or dissertation.

What’s the difference between a dissertation and a thesis?

Whatever the genre of the doctorate, a PhD must offer an original contribution to knowledge. The terms “dissertation” and “thesis” both refer to the long-form piece of work produced at the end of a research project and are often used interchangeably. Which one is used might depend on the country, discipline or university. In the UK, “thesis” is generally used for the work done for a PhD, while a “dissertation” is written for a master’s degree. The US did the same until the 1960s, says Oxbridge Essays, when the convention switched, and references appeared to a “master’s thesis” and “doctoral dissertation”. To complicate matters further, undergraduate long essays are also sometimes referred to as a thesis or dissertation.

The Oxford English Dictionary defines “thesis” as “a dissertation, especially by a candidate for a degree” and “dissertation” as “a detailed discourse on a subject, especially one submitted in partial fulfilment of the requirements of a degree or diploma”.

• Ten platinum rules for PhD supervisors
• Fostering freedom in PhD students: how supervisors can shape accessible paths for doctoral research
• Lessons from students on effective research supervision

The title “doctor of philosophy”, incidentally, comes from the degree’s origins, write Dr Felix, an associate professor at Mahidol University in Thailand, and Dr Smith, retired associate professor of education at the University of Sydney , whose co-authored guide focuses on the social sciences. The PhD was first awarded in the 19th century by the philosophy departments of German universities, which at that time taught science, social science and liberal arts.

How long should a PhD thesis be?

A PhD thesis (or dissertation) is typically 60,000 to 120,000 words ( 100 to 300 pages in length ) organised into chapters, divisions and subdivisions (with roughly 10,000 words per chapter) – from introduction (with clear aims and objectives) to conclusion.

The structure of a dissertation will vary depending on discipline (humanities, social sciences and STEM all have their own conventions), location and institution. Examples and guides to structure proliferate online. The University of Salford , for example, lists: title page, declaration, acknowledgements, abstract, table of contents, lists of figures, tables and abbreviations (where needed), chapters, appendices and references.

A scientific-style thesis will likely need: introduction, literature review, materials and methods, results, discussion, bibliography and references.

As well as checking the overall criteria and expectations of your institution for your research, consult your school handbook for the required length and format (font, layout conventions and so on) for your dissertation.

A PhD takes three to four years to complete; this might extend to six to eight years for a part-time doctorate.

What are the steps for completing a PhD?

Before you get started in earnest , you’ll likely have found a potential supervisor, who will guide your PhD journey, and done a research proposal (which outlines what you plan to research and how) as part of your application, as well as a literature review of existing scholarship in the field, which may form part of your final submission.

In the UK, PhD candidates undertake original research and write the results in a thesis or dissertation, says author and vlogger Simon Clark , who posted videos to YouTube throughout his own PhD journey . Then they submit the thesis in hard copy and attend the viva voce (which is Latin for “living voice” and is also called an oral defence or doctoral defence) to convince the examiners that their work is original, understood and all their own. Afterwards, if necessary, they make changes and resubmit. If the changes are approved, the degree is awarded.

The steps are similar in Australia , although candidates are mostly assessed on their thesis only; some universities may include taught courses, and some use a viva voce. A PhD in Australia usually takes three years full time.

In the US, the PhD process begins with taught classes (similar to a taught master’s) and a comprehensive exam (called a “field exam” or “dissertation qualifying exam”) before the candidate embarks on their original research. The whole journey takes four to six years.

A PhD candidate will need three skills and attitudes to get through their doctoral studies, says Tara Brabazon , professor of cultural studies at Flinders University in Australia who has written extensively about the PhD journey :

• master the academic foundational skills (research, writing, ability to navigate different modalities)
• time-management skills and the ability to focus on reading and writing
• determined motivation to do a PhD.

How do I choose the topic for my PhD dissertation or thesis?

It’s important to find a topic that will sustain your interest for the years it will take to complete a PhD. “Finding a sustainable topic is the most important thing you [as a PhD student] would do,” says Dr Brabazon in a video for Times Higher Education . “Write down on a big piece of paper all the topics, all the ideas, all the questions that really interest you, and start to cross out all the ones that might just be a passing interest.” Also, she says, impose the “Who cares? Who gives a damn?” question to decide if the topic will be useful in a future academic career.

The availability of funding and scholarships is also often an important factor in this decision, says veteran PhD supervisor Richard Godwin, from Harper Adams University .

Define a gap in knowledge – and one that can be questioned, explored, researched and written about in the time available to you, says Gina Wisker, head of the Centre for Learning and Teaching at the University of Brighton. “Set some boundaries,” she advises. “Don’t try to ask everything related to your topic in every way.”

James Hartley, research professor in psychology at Keele University, says it can also be useful to think about topics that spark general interest. If you do pick something that taps into the zeitgeist, your findings are more likely to be noticed.

You also need to find someone else who is interested in it, too. For STEM candidates , this will probably be a case of joining a team of people working in a similar area where, ideally, scholarship funding is available. A centre for doctoral training (CDT) or doctoral training partnership (DTP) will advertise research projects. For those in the liberal arts and social sciences, it will be a matter of identifying a suitable supervisor .

Avoid topics that are too broad (hunger across a whole country, for example) or too narrow (hunger in a single street) to yield useful solutions of academic significance, write Mark Stephan Felix and Ian Smith. And ensure that you’re not repeating previous research or trying to solve a problem that has already been answered. A PhD thesis must be original.

What is a thesis proposal?

After you have read widely to refine your topic and ensure that it and your research methods are original, and discussed your project with a (potential) supervisor, you’re ready to write a thesis proposal , a document of 1,500 to 3,000 words that sets out the proposed direction of your research. In the UK, a research proposal is usually part of the application process for admission to a research degree. As with the final dissertation itself, format varies among disciplines, institutions and countries but will usually contain title page, aims, literature review, methodology, timetable and bibliography. Examples of research proposals are available online.

How to write an abstract for a dissertation or thesis

The abstract presents your thesis to the wider world – and as such may be its most important element , says the NUI Galway writing guide. It outlines the why, how, what and so what of the thesis . Unlike the introduction, which provides background but not research findings, the abstract summarises all sections of the dissertation in a concise, thorough, focused way and demonstrates how well the writer understands their material. Check word-length limits with your university – and stick to them. About 300 to 500 words is a rough guide ­– but it can be up to 1,000 words.

The abstract is also important for selection and indexing of your thesis, according to the University of Melbourne guide , so be sure to include searchable keywords.

It is the first thing to be read but the last element you should write. However, Pat Thomson , professor of education at the University of Nottingham , advises that it is not something to be tackled at the last minute.

How to write a stellar conclusion

As well as chapter conclusions, a thesis often has an overall conclusion to draw together the key points covered and to reflect on the unique contribution to knowledge. It can comment on future implications of the research and open up new ideas emanating from the work. It is shorter and more general than the discussion chapter , says online editing site Scribbr, and reiterates how the work answers the main question posed at the beginning of the thesis. The conclusion chapter also often discusses the limitations of the research (time, scope, word limit, access) in a constructive manner.

It can be useful to keep a collection of ideas as you go – in the online forum DoctoralWriting SIG , academic developer Claire Aitchison, of the University of South Australia , suggests using a “conclusions bank” for themes and inspirations, and using free-writing to keep this final section fresh. (Just when you feel you’ve run out of steam.) Avoid aggrandising or exaggerating the impact of your work. It should remind the reader what has been done, and why it matters.

How to format a bibliography (or where to find a reliable model)

Most universities use a preferred style of references , writes THE associate editor Ingrid Curl. Make sure you know what this is and follow it. “One of the most common errors in academic writing is to cite papers in the text that do not then appear in the bibliography. All references in your thesis need to be cross-checked with the bibliography before submission. Using a database during your research can save a great deal of time in the writing-up process.”

A bibliography contains not only works cited explicitly but also those that have informed or contributed to the research – and as such illustrates its scope; works are not limited to written publications but include sources such as film or visual art.

Examiners can start marking from the back of the script, writes Dr Brabazon. “Just as cooks are judged by their ingredients and implements, we judge doctoral students by the calibre of their sources,” she advises. She also says that candidates should be prepared to speak in an oral examination of the PhD about any texts included in their bibliography, especially if there is a disconnect between the thesis and the texts listed.

Can I use informal language in my PhD?

Don’t write like a stereotypical academic , say Kevin Haggerty, professor of sociology at the University of Alberta , and Aaron Doyle, associate professor in sociology at Carleton University , in their tongue-in-cheek guide to the PhD journey. “If you cannot write clearly and persuasively, everything about PhD study becomes harder.” Avoid jargon, exotic words, passive voice and long, convoluted sentences – and work on it consistently. “Writing is like playing guitar; it can improve only through consistent, concerted effort.”

Be deliberate and take care with your writing . “Write your first draft, leave it and then come back to it with a critical eye. Look objectively at the writing and read it closely for style and sense,” advises THE ’s Ms Curl. “Look out for common errors such as dangling modifiers, subject-verb disagreement and inconsistency. If you are too involved with the text to be able to take a step back and do this, then ask a friend or colleague to read it with a critical eye. Remember Hemingway’s advice: ‘Prose is architecture, not interior decoration.’ Clarity is key.”

How often should a PhD candidate meet with their supervisor?

Since the PhD supervisor provides a range of support and advice – including on research techniques, planning and submission – regular formal supervisions are essential, as is establishing a line of contact such as email if the candidate needs help or advice outside arranged times. The frequency varies according to university, discipline and individual scholars.

Once a week is ideal, says Dr Brabazon. She also advocates a two-hour initial meeting to establish the foundations of the candidate-supervisor relationship .

The University of Edinburgh guide to writing a thesis suggests that creating a timetable of supervisor meetings right at the beginning of the research process will allow candidates to ensure that their work stays on track throughout. The meetings are also the place to get regular feedback on draft chapters.

“A clear structure and a solid framework are vital for research,” writes Dr Godwin on THE Campus . Use your supervisor to establish this and provide a realistic view of what can be achieved. “It is vital to help students identify the true scientific merit, the practical significance of their work and its value to society.”

How to proofread your dissertation (what to look for)

Proofreading is the final step before printing and submission. Give yourself time to ensure that your work is the best it can be . Don’t leave proofreading to the last minute; ideally, break it up into a few close-reading sessions. Find a quiet place without distractions. A checklist can help ensure that all aspects are covered.

Proofing is often helped by a change of format – so it can be easier to read a printout rather than working off the screen – or by reading sections out of order. Fresh eyes are better at spotting typographical errors and inconsistencies, so leave time between writing and proofreading. Check with your university’s policies before asking another person to proofread your thesis for you.

As well as close details such as spelling and grammar, check that all sections are complete, all required elements are included , and nothing is repeated or redundant. Don’t forget to check headings and subheadings. Does the text flow from one section to another? Is the structure clear? Is the work a coherent whole with a clear line throughout?

Ensure consistency in, for example, UK v US spellings, capitalisation, format, numbers (digits or words, commas, units of measurement), contractions, italics and hyphenation. Spellchecks and online plagiarism checkers are also your friend.

How do you manage your time to complete a PhD dissertation?

Treat your PhD like a full-time job, that is, with an eight-hour working day. Within that, you’ll need to plan your time in a way that gives a sense of progress . Setbacks and periods where it feels as if you are treading water are all but inevitable, so keeping track of small wins is important, writes A Happy PhD blogger Luis P. Prieto.

Be specific with your goals – use the SMART acronym (specific, measurable, attainable, relevant and timely).

And it’s never too soon to start writing – even if early drafts are overwritten and discarded.

“ Write little and write often . Many of us make the mistake of taking to writing as one would take to a sprint, in other words, with relatively short bursts of intense activity. Whilst this can prove productive, generally speaking it is not sustainable…In addition to sustaining your activity, writing little bits on a frequent basis ensures that you progress with your thinking. The comfort of remaining in abstract thought is common; writing forces us to concretise our thinking,” says Christian Gilliam, AHSS researcher developer at the University of Cambridge ’s Centre for Teaching and Learning.

Make time to write. “If you are more alert early in the day, find times that suit you in the morning; if you are a ‘night person’, block out some writing sessions in the evenings,” advises NUI Galway’s Dermot Burns, a lecturer in English and creative arts. Set targets, keep daily notes of experiment details that you will need in your thesis, don’t confuse writing with editing or revising – and always back up your work.

What work-life balance tips should I follow to complete my dissertation?

During your PhD programme, you may have opportunities to take part in professional development activities, such as teaching, attending academic conferences and publishing your work. Your research may include residencies, field trips or archive visits. This will require time-management skills as well as prioritising where you devote your energy and factoring in rest and relaxation. Organise your routine to suit your needs , and plan for steady and regular progress.

How to deal with setbacks while writing a thesis or dissertation

Have a contingency plan for delays or roadblocks such as unexpected results.

Accept that writing is messy, first drafts are imperfect, and writer’s block is inevitable, says Dr Burns. His tips for breaking it include relaxation to free your mind from clutter, writing a plan and drawing a mind map of key points for clarity. He also advises feedback, reflection and revision: “Progressing from a rough version of your thoughts to a superior and workable text takes time, effort, different perspectives and some expertise.”

“Academia can be a relentlessly brutal merry-go-round of rejection, rebuttal and failure,” writes Lorraine Hope , professor of applied cognitive psychology at the University of Portsmouth, on THE Campus. Resilience is important. Ensure that you and your supervisor have a relationship that supports open, frank, judgement-free communication.

If you found this interesting and want advice and insight from academics and university staff delivered direct to your inbox each week, sign up for the THE Campus newsletter .

Authoring a PhD Thesis: How to Plan, Draft, Write and Finish a Doctoral Dissertation (2003), by Patrick Dunleavy

Writing Your Dissertation in Fifteen Minutes a Day: A Guide to Starting, Revising, and Finishing Your Doctoral Thesis (1998), by Joan Balker

Challenges in Writing Your Dissertation: Coping with the Emotional, Interpersonal, and Spiritual Struggles (2015), by Noelle Sterne

Emotions and learning: what role do emotions play in how and why students learn?

Global perspectives: navigating challenges in higher education across borders, how to help young women see themselves as coders, contextual learning: linking learning to the real world, authentic assessment in higher education and the role of digital creative technologies, how hard can it be testing ai detection tools.

Register for free

and unlock a host of features on the THE site

GSLC Dissertation Support Guide

• GSLC Dissertation Support Guide Home
• Digital Accessibility [alt text] Requirements from OhioLINK
• Digital Dissertations [PDF] + Supplemental Files / Font Requirements
• Essential Resources: Dissertation Handbook & Style Choices & Authoritative Manuals
• Including Multimedia Inside Your Dissertation Document- Tips From WEX This link opens in a new window
• WEX FAQs and other editing tips / checklists This link opens in a new window
• Our Archives : Where your Dissertation will "live"
• Dissertation Titles and Online Discovery

Abstract Requirements

Selecting keywords & subject headings.

• Multimedia /Data Set Inclusion - Supplemental Files
• Author Introduction - Multimedia Option
• Your Name and Your ORCID Number
• Copyright and Permissions
• Permission Request Checklist
• Final Submission - Link & Important Instructions
• Post - Submission
• Curating your Scholarly Identity This link opens in a new window
• Last Steps Workshop This link opens in a new window

The Dissertation Abstract

The abstract is your dissertation's calling card to the world.  The abstract is usually your first connection with every potential reader.   It also is a key feature in discovery of your dissertation through search engines.

Abstract Requirements and Checklist :

• Number of paragraphs  : Abstract should be ONE PARAGRAPH  [no returns]
• CC License Option: If you have chosen a Creative Commons License , this must specified in the abstract mentioning the type of license and linking back the the CC License page.
• how many supplemental files
• type of file
• whether or not they are also accessible within the PDF.  
• T his includes the author video abstract
• Length:  Abstracts no longer have length requirements in UMI/Proquest, but the print version of the database will cut off at 350 words MAXIMUM.   APA Style calls for 150-250 words, which is most reasonable.    The shorter, the better.
• Final Sentence :  To enhance discovery every abstract must carry this sentence at the end

  This dissertation is available in open access at AURA: Antioch University Repository and Archive, https://aura.antioch.edu/  and OhioLINK ETD Center, https://etd.ohiolink.edu/

Keywords are also essential to your dissertation being discovered online.

Keyword Guidelines:

• Place the keywords a few lines below the Abstract in your dissertation
• Your Keyword field is limited to 350  characters
• The Keywords in the Final Submission Form must match the Keywords in the Dissertation

Selecting Keyword :

Consider:   Which words would someone interested in my dissertation use? 

• ​ Language/ Jargon  used in your academic field? e,g, community of practice, best self
• Synonyms and Related Terms:  e.g. non-profit, not-for-profit, third sector / eating disorders,  anorexia, bulimia
• Alternate Spellings :  e.g. organisation, organization
• Methodology : e.g. grounded theory, qualitative, etc.
• Population:   e.g.  teachers, executives, African Americans, college students, grandparents
• Venue:   e.g.  workplace, corporations, elementary schools

Test your Keywords in Google and Google Scholar to see if they yield the items similar to your dissertation.

Subject Headings

On the Final Submission Form you will also be able to select Subject Headings for the Ohiolink ETD Center Archive;

• These subject headings DO NOT go into your dissertation
• This is a "Controlled Vocabulary" List.    You cannot change or add to the list.  There is no Subject Heading for LEADERSHIP. So add 'leadership' in your keyword list.
• Choose the most appropriate subject headings for your dissertation.  

Attached below is the current list from which you will choose.

• << Previous: Dissertation Titles and Online Discovery
• Next: Multimedia /Data Set Inclusion - Supplemental Files >>
• Last Updated: Mar 28, 2024 11:03 AM
• URL: https://libguides-phd.antioch.edu/AUETDCENTRAL

Smart. Open. Grounded. Inventive. Read our Ideas Made to Matter.

Which program is right for you?

Through intellectual rigor and experiential learning, this full-time, two-year MBA program develops leaders who make a difference in the world.

A rigorous, hands-on program that prepares adaptive problem solvers for premier finance careers.

A 12-month program focused on applying the tools of modern data science, optimization and machine learning to solve real-world business problems.

Earn your MBA and SM in engineering with this transformative two-year program.

Combine an international MBA with a deep dive into management science. A special opportunity for partner and affiliate schools only.

A doctoral program that produces outstanding scholars who are leading in their fields of research.

Bring a business perspective to your technical and quantitative expertise with a bachelor’s degree in management, business analytics, or finance.

A joint program for mid-career professionals that integrates engineering and systems thinking. Earn your master’s degree in engineering and management.

An interdisciplinary program that combines engineering, management, and design, leading to a master’s degree in engineering and management.

Executive Programs

A full-time MBA program for mid-career leaders eager to dedicate one year of discovery for a lifetime of impact.

This 20-month MBA program equips experienced executives to enhance their impact on their organizations and the world.

Non-degree programs for senior executives and high-potential managers.

A non-degree, customizable program for mid-career professionals.

Sample Dissertation Abstracts

One of the best ways to determine your fit in a PhD program is familiarizing yourself with the research done by faculty and students in the institute. Students in the Sloan PhD Program study a wide variety of topics and the abstracts below will give you examples of the topics they have chosen to study.

Dissertation Abstracts by Research Group

Selected Dissertation Abstracts by recent PhD Program graduates

BEHAVIORAL & POLICY SCIENCES

• Economic Sociology 
• Institute for Work & Employment Research
• Organization Studies
• Technological Innovation, Entrepreneurship, & Strategic Management

ECONOMICS  FINANCE & ACCOUNTING

MANAGEMENT SCIENCE

• Information Technology
• System Dynamics

• Manuscript Preparation

Know How to Structure Your PhD Thesis

• 4 minute read
• 32.2K views

Table of Contents

In your academic career, few projects are more important than your PhD thesis. Unfortunately, many university professors and advisors assume that their students know how to structure a PhD. Books have literally been written on the subject, but there’s no need to read a book in order to know about PhD thesis paper format and structure. With that said, however, it’s important to understand that your PhD thesis format requirement may not be the same as another student’s. The bottom line is that how to structure a PhD thesis often depends on your university and department guidelines.

But, let’s take a look at a general PhD thesis format. We’ll look at the main sections, and how to connect them to each other. We’ll also examine different hints and tips for each of the sections. As you read through this toolkit, compare it to published PhD theses in your area of study to see how a real-life example looks.

Main Sections of a PhD Thesis

In almost every PhD thesis or dissertation, there are standard sections. Of course, some of these may differ, depending on your university or department requirements, as well as your topic of study, but this will give you a good idea of the basic components of a PhD thesis format.

• Abstract : The abstract is a brief summary that quickly outlines your research, touches on each of the main sections of your thesis, and clearly outlines your contribution to the field by way of your PhD thesis. Even though the abstract is very short, similar to what you’ve seen in published research articles, its impact shouldn’t be underestimated. The abstract is there to answer the most important question to the reviewer. “Why is this important?”
• Introduction : In this section, you help the reviewer understand your entire dissertation, including what your paper is about, why it’s important to the field, a brief description of your methodology, and how your research and the thesis are laid out. Think of your introduction as an expansion of your abstract.
• Literature Review : Within the literature review, you are making a case for your new research by telling the story of the work that’s already been done. You’ll cover a bit about the history of the topic at hand, and how your study fits into the present and future.
• Theory Framework : Here, you explain assumptions related to your study. Here you’re explaining to the review what theoretical concepts you might have used in your research, how it relates to existing knowledge and ideas.
• Methods : This section of a PhD thesis is typically the most detailed and descriptive, depending of course on your research design. Here you’ll discuss the specific techniques you used to get the information you were looking for, in addition to how those methods are relevant and appropriate, as well as how you specifically used each method described.
• Results : Here you present your empirical findings. This section is sometimes also called the “empiracles” chapter. This section is usually pretty straightforward and technical, and full of details. Don’t shortcut this chapter.
• Discussion : This can be a tricky chapter, because it’s where you want to show the reviewer that you know what you’re talking about. You need to speak as a PhD versus a student. The discussion chapter is similar to the empirical/results chapter, but you’re building on those results to push the new information that you learned, prior to making your conclusion.
• Conclusion : Here, you take a step back and reflect on what your original goals and intentions for the research were. You’ll outline them in context of your new findings and expertise.

Tips for your PhD Thesis Format

As you put together your PhD thesis, it’s easy to get a little overwhelmed. Here are some tips that might keep you on track.

• Don’t try to write your PhD as a first-draft. Every great masterwork has typically been edited, and edited, and…edited.
• Work with your thesis supervisor to plan the structure and format of your PhD thesis. Be prepared to rewrite each section, as you work out rough drafts. Don’t get discouraged by this process. It’s typical.
• Make your writing interesting. Academic writing has a reputation of being very dry.
• You don’t have to necessarily work on the chapters and sections outlined above in chronological order. Work on each section as things come up, and while your work on that section is relevant to what you’re doing.
• Don’t rush things. Write a first draft, and leave it for a few days, so you can come back to it with a more critical take. Look at it objectively and carefully grammatical errors, clarity, logic and flow.
• Know what style your references need to be in, and utilize tools out there to organize them in the required format.
• It’s easier to accidentally plagiarize than you think. Make sure you’re referencing appropriately, and check your document for inadvertent plagiarism throughout your writing process.

PhD Thesis Editing Plus

Want some support during your PhD writing process? Our PhD Thesis Editing Plus service includes extensive and detailed editing of your thesis to improve the flow and quality of your writing. Unlimited editing support for guaranteed results. Learn more here , and get started today!

• Publication Process

Journal Acceptance Rates: Everything You Need to Know

• Publication Recognition

How to Make a PowerPoint Presentation of Your Research Paper

You may also like.

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

The Essentials of Writing to Communicate Research in Medicine

Changing Lines: Sentence Patterns in Academic Writing

Input your search keywords and press Enter.

Sample Dissertation Abstracts

Amy K. Anderson , 2014

“Image/Text and Text/Image: Reimagining Multimodal Relationships through Dissociation”

“W.J.T. Mitchell has famously noted that we are in the midst of a “pictorial turn,” and images are playing an increasingly important role in digital and multimodal communication. My dissertation addresses the question of how meaning is made when texts and images are united in multimodal arguments. Visual rhetoricians have often attempted to understand text-image arguments by privileging one medium over the other, either using text-based rhetorical principles or developing new image-based theories. I argue that the relationship between the two media is more dynamic, and can be better understood by applying The New Rhetoric ’s concept of dissociation, which Chaim Perelman and Lucie Olbrechts-Tyteca developed to demonstrate how the interaction of differently valued concepts can construct new meaning. My dissertation expands the range of dissociation by applying it specifically to visual contexts and using it to critique visual arguments in a series of historical moments when political, religious, and economic factors cause one form of media to be valued over the other: Byzantine Iconoclasm, the late medieval period, the 1950’s advertising boom, and the modern digital age. In each of these periods, I argue that dissociation reveals how the privileged medium can shape an entire multimodal argument. I conclude with a discussion of dissociative multimodal pedagogy, applying dissociation to the multimodal composition classroom.”

Holly F. Osborn , 2014

“Apparitional Economies: Spectral Imagery in the Antebellum Imagination”

“ Apparitional Economies is invested in both a historical consideration of economic conditions through the antebellum era and an examination of how spectral representations depict the effects of such conditions on local publics and individual persons. From this perspective, the project demonstrates how extensively the period’s literature is entangled in the economic: in financial devastation, in the boundaries of seemingly limitless progress, and in the standards of value that order the worth of commodities and the persons who can trade for them.  I argue that the space of the specter is a force of representation, an invisible site in which the uncertainties of antebellum economic and social change become visible. I read this spectral space in canonical works by Nathaniel Hawthorne, Edgar Allan Poe, Herman Melville, and Walt Whitman and in emerging texts by Robert Montgomery Bird, Theophilus Fisk, Fitz James O’Brien, and Edward Williams Clay.  Methodologically, Apparitional Economies moves through historical events and textual representation in two ways: chronologically with an attention to archival materials through the antebellum era (beginning with the specters that emerge with the Panic of 1837) and interpretively across the readings of a literary specter (as a space of lack and potential, as exchange, as transformation, and as the presence of absence). As a failed body and, therefore, a flawed embodiment of economic existence, the literary specter proves a powerful representation of antebellum social and financial uncertainties.”

Michael Todd Hendricks , 2014

“Knowing and Being Known: Sexual Delinquency, Stardom, and Adolescent Girlhood in Midcentury American Film”

“Sexual delinquency marked midcentury cinematic representations of adolescent girls in 1940s, 50, and early 60s. Drawing from the history of adolescence and the context of midcentury female juvenile delinquency, I argue that studios and teen girl stars struggled for decades with publicity, censorship, and social expectations regarding the sexual license of teenage girls. Until the late 1950s, exploitation films and B movies exploited teen sex and pregnancy while mainstream Hollywood ignored those issues, struggling to promote teen girl stars by tightly controlling their private lives but depriving fan magazines of the gossip and scandals that normally fueled the machinery of stardom. The emergence and image of the postwar, sexually autonomous teen girl finally began to see expression in mainstream melodramas of the late 50s, and teen girl stars such as Sandra Dee and Natalie Wood created new, “post-delinquent” star images wherein “good girls” could still be sexually experienced. This new image was a significant departure from the widespread belief that the sexually active teen girl was a fundamentally delinquent threat to the nuclear family, and offered a liberal counterpoint to more conservative teen girl prototypes like Hayley Mills, which continued to have cultural currency.”

Emily A. Dotson , 2014

“Strong Angels of Comfort: Middle Class Managing Daughters in Victorian Literature”

“This dissertation joins a vibrant conversation in the social sciences about the challenging nature of care labor as well as feminist discussions about the role of the daughter in Victorian culture.  It explores the literary presence of the middle class managing daughter in the Victorian home.  Collectively, the novels in this study articulate social anxieties about the unclear and unstable role of daughters in the family, the physically and emotionally challenging work they, and all women, do, and the struggle for daughters to find a place in a family hierarchy, which is often structured not by effort or affection, but by proscribed traditional roles, which do not easily adapt to managing daughters, even if they are the ones holding the family together.  The managing daughter is a problem not accounted for in any conventional domestic structure or ideology so there is no role, no clear set of responsibilities and no boundaries that could, and arguably should, define her obligations, offer her opportunities for empowerment, or set necessary limits on the broad cultural mandate she has to comfort and care others.  The extremes she is often pushed to reveals the stresses and hidden conflicts for authority and autonomy inherent in domestic labor without the iconic angel in the house rhetoric that so often masks the difficulties of domestic life for women. She gains no authority or stability no matter how loving or even how necessary she is to a family because there simply is no position in the parental family structure for her.  The managing daughter thus reveals a deep crack in the structure of the traditional Victorian family by showing that it often cannot accommodate, protect, or validate a loving non-traditional family member because it values traditional hierarchies over emotion or effort.  Yet, in doing so, it also suggests that if it is position not passion that matters, then as long as a woman assumes the right position in the family then deep emotional connections to others are not necessary for her to care competently for others.”

Virginia B. Engholm , 2014

“The Power of Multiplying: Reproductive Control in American Culture, 1850-1930”

“Prior to the advent of modern birth control beginning in the nineteenth century, the biological reproductive cycle of pregnancy, post-partum recovery, and nursing dominated women’s adult years. The average birth rate per woman in 1800 was just over seven, but by 1900, that rate had fallen to just under than three and a half. The question that this dissertation explores is what cultural narratives about reproduction and reproductive control emerge in the wake of this demographic shift. What’s at stake in a woman’s decision to reproduce, for herself, her family, her nation? How do women, and society, control birth?  In order to explore these questions, this dissertation broadens the very term “birth control” from the technological and medical mechanisms by which women limit or prevent conception and birth to a conception of “controlling birth,” the societal and cultural processes that affect reproductive practices. This dissertation, then, constructs a cultural narrative of the process of controlling birth. Moving away from a focus on “negative birth control”—contraception, abortion, sterilization—the term “controlling birth” also applies to engineering or encouraging wanted or desired reproduction. While the chapters of this work often focus on traditional sites of birth control—contraceptives, abortion, and eugenics—they are not limited to those forms, uncovering previously hidden narratives of reproduction control. This new lens also reveals men’s investment in these reproductive practices.  By focusing on a variety of cultural texts—advertisements, fictional novels, historical writings, medical texts, popular print, and film—this project aims to create a sense of how these cultural productions work together to construct narratives about sexuality, reproduction, and reproductive control. Relying heavily on a historicizing of these issues, my project shows how these texts—both fictional and nonfictional—create a rich and valid site from which to explore the development of narratives of sexuality and reproductive practices, as well as how these narratives connect to larger cultural narratives of race, class, and nation. The interdisciplinary nature of this inquiry highlights the interrelationship between the literary productions of the nineteenth and twentieth century and American cultural history.

Amber M. Stamper , 2013

“Witnessing the Web: The Rhetoric of American E-Vangelism and Persuasion Online”

“From the distribution of religious tracts at Ellis Island and Billy Sunday’s radio messages to televised recordings of the Billy Graham Crusade and Pat Robertson’s 700 Club, American evangelicals have long made a practice of utilizing mass media to spread the Gospel. Most recently, these Christian evangelists have gone online. As a contribution to scholarship in religious rhetoric and media studies, this dissertation offers evangelistic websites as a case study into the ways persuasion is carried out on the Internet. Through an analysis of digital texts—including several evangelical home pages, a chat room, discussion forums, and a virtual church—I investigate how conversion is encouraged via web design and virtual community as well as how the Internet medium impacts the theology and rhetorical strategies of web evangelists. I argue for “persuasive architecture” and “persuasive communities”—web design on the fundamental level of interface layout and tightly-controlled restrictions on discourse and community membership—as key components of this strategy. In addition, I argue that evangelical ideology has been influenced by the web medium and that a “digital reformation” is taking place in the church, one centered on a move away from the Prosperity Gospel of televangelism to a Gospel focused on God as divine problem-solver and salvation as an uncomplicated, individualized, and instantaneously-rewarding experience, mimicking Web 2.0 users’ desire for quick, timely, and effective answers to all queries. This study simultaneously illuminates the structural and fundamental levels of design through which the web persuades as well as how—as rhetoricians from Plato’s King Thamus to Marshall McLuhan have recognized—media inevitably shapes the message and culture of its users.”

Devjani Roy , 2013

“Randomness, Uncertainty, and Economic Behavior: The Life of Money in Eighteenth-Century Fiction”

“My dissertation argues that fiction produced in England during the frequent financial crises and political volatility experienced between 1770 and 1820 both reflected and shaped the cultural anxiety occasioned by a seemingly random and increasingly uncertain world. The project begins within the historical framework of the multiple financial crises that occurred in the late eighteenth century: seven crises took place between 1760 and 1797 alone, appearing seemingly out of nowhere and creating a climate of financial meltdown. But how did the awareness of economic turbulence filter into the creative consciousness? Through an interdisciplinary focus on cultural studies and behavioral economics, the dissertation posits that in spite of their conventional, status quo affirming endings (opportunists are punished, lovers are married), novels and plays written between 1770 and 1820 contemplated models of behavior that were newly opportunistic, echoing the reluctant realization that irrationality had become the norm rather than a rare aberration. By analyzing concrete narrative strategies used by writers such as Frances Burney, Georgiana Cavendish, Hannah Cowley, and Thomas Holcroft, I demonstrate that late eighteenth-century fiction both articulates and elides the awareness of randomness and uncertainty in its depiction of plot, character, and narrative.”

George Micajah Phillips , 2011

“Seeing Subjects: Recognition, Identity, and Visual Cultures in Literary Modernism”

“ Seeing Subjects plots a literary history of modern Britain that begins with Dorian Gray obsessively inspecting his portrait’s changes and ends in Virginia Woolf’s visit to the cinema where she found audiences to be “savages watching the pictures.” Focusing on how literature in the late-19 th and 20 th centuries regarded images as possessing a shaping force over how identities are understood and performed, I argue that modernists in Britain felt mediated images were altering, rather than merely representing, British identity. As Britain’s economy expanded to unprecedented imperial reach and global influence, new visual technologies also made it possible to render images culled from across the British world—from its furthest colonies to darkest London—to the small island nation, deeply and irrevocably complicating British identity. In response, Oscar Wilde, Joseph Conrad, T. S. Eliot, and others sought to better understand how identity was recognized, particularly visually. By exploring how painting, photography, colonial exhibitions, and cinema sought to manage visual representations of identity, these modernists found that recognition began by acknowledging the familiar but also went further to acknowledge what was strange and new as well. Reading recognition and misrecognition as crucial features of modernist texts, Seeing Subjects argues for a new understanding of how modernism’s formal experimentation came to be and for how it calls for responses from readers today.”

Aparajita Sengupta , 2011

“Nation, Fantasy, and Mimicry: Elements of Political Resistance in Postcolonial Indian Cinema”

“In spite of the substantial amount of critical work that has been produced on Indian cinema in the last decade, misconceptions about Indian cinema still abound. Indian cinema is a subject about which conceptions are still muddy, even within prominent academic circles. The majority of the recent critical work on the subject endeavors to correct misconceptions, analyze cinematic norms and lay down the theoretical foundations for Indian cinema. This dissertation conducts a study of the cinema from India with a view to examine the extent to which such cinema represents an anti-colonial vision. The political resistance of Indian films to colonial and neo-colonial norms, and their capacity to formulate a national identity is the primary focus of the current study.”

Kenneth Carr Hawley , 2007

“The Boethian Vision of Eternity in Old, Middle, and Early Modern English Translations of De Consolatione Philosophi”

“While this analysis of the Old, Middle, and Early Modern English translations of De Consolatione Philosophiandamp;aelig; provides a brief reception history and an overview of the critical tradition surrounding each version, its focus is upon how these renderings present particular moments that offer the consolation of eternity, especially since such passages typify the work as a whole. For Boethius, confused and conflicting views on fame, fortune, happiness, good and evil, fate, free will, necessity, foreknowledge, and providence are only capable of clarity and resolution to the degree that one attains to knowledge of the divine mind and especially to knowledge like that of the divine mind, which alone possesses a perfectly eternal perspective. Thus, as it draws upon such fundamentally Boethian passages on the eternal Prime Mover, this study demonstrates how the translators have negotiated linguistic, literary, cultural, religious, and political expectations and forces as they have presented their own particular versions of the Boethian vision of eternity. Even though the text has been understood, accepted, and appropriated in such divergent ways over the centuries, the Boethian vision of eternity has held his Consolations arguments together and undergirded all of its most pivotal positions, without disturbing or compromising the philosophical, secular, academic, or religious approaches to the work, as readers from across the ideological, theological, doctrinal, and political spectra have appreciated and endorsed the nature and the implications of divine eternity. It is the consolation of eternity that has been cast so consistently and so faithfully into Old, Middle, and Early Modern English, regardless of form and irrespective of situation or background. For whether in prose and verse, all-prose, or all-verse, and whether by a Catholic, a Protestant, a king, a queen, an author, or a scholar, each translation has presented the texts central narrative: as Boethius the character is educated by the figure of Lady Philosophy, his eyes are turned away from the earth and into the heavens, moving him and his mind from confusion to clarity, from forgetfulness to remembrance, from reason to intelligence, and thus from time to eternity.”

Douglas Larue Reside , 2006

“The Electronic Edition and Textual Criticism of American Musical Theatre”

“For many, contemporary theatre is represented by the musical. The form remains, however, virtually unstudied by literary scholars. In part, this may be a result of the difficulty of accessing the texts. Reading a musical from a traditional codex is no easy matter. The integration of text and music in a musical make it inappropriate to separate the two. One can try to follow along with a cast recording. In most cases, though, this is awkward. Many cast albums record a significantly modified version of the score and lyrics and few include the entire work. Further, musical theatre texts often exist in many different versions. This work begins with a summary of the problems one encounters when editing a multi-authored text (musicals often have a lyricist, librettist, and composer) which may be revised for practical (rather than aesthetic) reasons. The merits of restoring the material changed during the production process are debated. In this discussion some attempt is made to identify who should be considered the dominating collaborator (or auteur) of a musical. Ultimately, this dissertation argues that the notion of trying to restore an "authorial Ur-Text" makes little sense given the multitude of collaborators involved in the process of making musicals. Instead, an electronic variorum edition is presented as an alternative means of studying and teaching musical theatre texts. The study concludes with a narrative of the authors own work on an electronic edition of the 1998 Broadway musical Parade and ends with a critical introduction to this text.”

Frequently asked questions

Where does the abstract go in a thesis or dissertation.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Frequently asked questions: Dissertation

Dissertation word counts vary widely across different fields, institutions, and levels of education:

• An undergraduate dissertation is typically 8,000–15,000 words
• A master’s dissertation is typically 12,000–50,000 words
• A PhD thesis is typically book-length: 70,000–100,000 words

However, none of these are strict guidelines – your word count may be lower or higher than the numbers stated here. Always check the guidelines provided by your university to determine how long your own dissertation should be.

A dissertation prospectus or proposal describes what or who you plan to research for your dissertation. It delves into why, when, where, and how you will do your research, as well as helps you choose a type of research to pursue. You should also determine whether you plan to pursue qualitative or quantitative methods and what your research design will look like.

It should outline all of the decisions you have taken about your project, from your dissertation topic to your hypotheses and research objectives , ready to be approved by your supervisor or committee.

Note that some departments require a defense component, where you present your prospectus to your committee orally.

A thesis is typically written by students finishing up a bachelor’s or Master’s degree. Some educational institutions, particularly in the liberal arts, have mandatory theses, but they are often not mandatory to graduate from bachelor’s degrees. It is more common for a thesis to be a graduation requirement from a Master’s degree.

Even if not mandatory, you may want to consider writing a thesis if you:

• Plan to attend graduate school soon
• Have a particular topic you’d like to study more in-depth
• Are considering a career in research
• Would like a capstone experience to tie up your academic experience

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

For a stronger dissertation conclusion , avoid including:

• Important evidence or analysis that wasn’t mentioned in the discussion section and results section
• Generic concluding phrases (e.g. “In conclusion …”)
• Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

A theoretical framework can sometimes be integrated into a  literature review chapter , but it can also be included as its own chapter or section in your dissertation . As a rule of thumb, if your research involves dealing with a lot of complex theories, it’s a good idea to include a separate theoretical framework chapter.

A literature review and a theoretical framework are not the same thing and cannot be used interchangeably. While a theoretical framework describes the theoretical underpinnings of your work, a literature review critically evaluates existing research relating to your topic. You’ll likely need both in your dissertation .

While a theoretical framework describes the theoretical underpinnings of your work based on existing research, a conceptual framework allows you to draw your own conclusions, mapping out the variables you may use in your study and the interplay between them.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

In most styles, the title page is used purely to provide information and doesn’t include any images. Ask your supervisor if you are allowed to include an image on the title page before doing so. If you do decide to include one, make sure to check whether you need permission from the creator of the image.

Include a note directly beneath the image acknowledging where it comes from, beginning with the word “ Note .” (italicized and followed by a period). Include a citation and copyright attribution . Don’t title, number, or label the image as a figure , since it doesn’t appear in your main text.

Definitional terms often fall into the category of common knowledge , meaning that they don’t necessarily have to be cited. This guidance can apply to your thesis or dissertation glossary as well.

However, if you’d prefer to cite your sources , you can follow guidance for citing dictionary entries in MLA or APA style for your glossary.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, an index is a list of the contents of your work organized by page number.

The title page of your thesis or dissertation goes first, before all other content or lists that you may choose to include.

The title page of your thesis or dissertation should include your name, department, institution, degree program, and submission date.

Glossaries are not mandatory, but if you use a lot of technical or field-specific terms, it may improve readability to add one to your thesis or dissertation. Your educational institution may also require them, so be sure to check their specific guidelines.

A glossary or “glossary of terms” is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. Your glossary only needs to include terms that your reader may not be familiar with, and is intended to enhance their understanding of your work.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, dictionaries are more general collections of words.

An abbreviation is a shortened version of an existing word, such as Dr. for Doctor. In contrast, an acronym uses the first letter of each word to create a wholly new word, such as UNESCO (an acronym for the United Nations Educational, Scientific and Cultural Organization).

As a rule of thumb, write the explanation in full the first time you use an acronym or abbreviation. You can then proceed with the shortened version. However, if the abbreviation is very common (like PC, USA, or DNA), then you can use the abbreviated version from the get-go.

Be sure to add each abbreviation in your list of abbreviations !

If you only used a few abbreviations in your thesis or dissertation , you don’t necessarily need to include a list of abbreviations .

If your abbreviations are numerous, or if you think they won’t be known to your audience, it’s never a bad idea to add one. They can also improve readability, minimizing confusion about abbreviations unfamiliar to your reader.

A list of abbreviations is a list of all the abbreviations that you used in your thesis or dissertation. It should appear at the beginning of your document, with items in alphabetical order, just after your table of contents .

Your list of tables and figures should go directly after your table of contents in your thesis or dissertation.

Lists of figures and tables are often not required, and aren’t particularly common. They specifically aren’t required for APA-Style, though you should be careful to follow their other guidelines for figures and tables .

If you have many figures and tables in your thesis or dissertation, include one may help you stay organized. Your educational institution may require them, so be sure to check their guidelines.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation and displays them with the page number where they can be found.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

You may acknowledge God in your dissertation acknowledgements , but be sure to follow academic convention by also thanking the members of academia, as well as family, colleagues, and friends who helped you.

A literature review is a survey of credible sources on a topic, often used in dissertations , theses, and research papers . Literature reviews give an overview of knowledge on a subject, helping you identify relevant theories and methods, as well as gaps in existing research. Literature reviews are set up similarly to other  academic texts , with an introduction , a main body, and a conclusion .

An  annotated bibliography is a list of  source references that has a short description (called an annotation ) for each of the sources. It is often assigned as part of the research process for a  paper .  

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

In the discussion , you explore the meaning and relevance of your research results , explaining how they fit with existing research and theory. Discuss:

• Your  interpretations : what do the results tell us?
• The  implications : why do the results matter?
• The  limitation s : what can’t the results tell us?

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

In a thesis or dissertation, the acknowledgements should usually be no longer than one page. There is no minimum length.

The acknowledgements are generally included at the very beginning of your thesis , directly after the title page and before the abstract .

Yes, it’s important to thank your supervisor(s) in the acknowledgements section of your thesis or dissertation .

Even if you feel your supervisor did not contribute greatly to the final product, you must acknowledge them, if only for a very brief thank you. If you do not include your supervisor, it may be seen as a snub.

In the acknowledgements of your thesis or dissertation, you should first thank those who helped you academically or professionally, such as your supervisor, funders, and other academics.

Then you can include personal thanks to friends, family members, or anyone else who supported you during the process.

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

• Email [email protected]
• Start live chat
• Call +1 (510) 822-8066
• WhatsApp +31 20 261 6040

Our team helps students graduate by offering:

• A world-class citation generator
• Plagiarism Checker software powered by Turnitin
• Innovative Citation Checker software
• Professional proofreading services
• Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

• PhD dissertations
• Research proposals
• Personal statements
• Admission essays
• Motivation letters
• Reflection papers
• Journal articles
• Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is powered by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .