how to write a introduction for a case study

Blog about Writing Case Study and Coursework

dudestudy.com

How to Write an Introduction for a Case Study Report

If you’re looking for examples of how to write an introduction for a case-study report, you’ve come to the right place. Here you’ll find a sample, guidelines for writing a case-study introduction, and tips on how to make it clear. In five minutes or less, recruiters will read your case study and decide whether you’re a good fit for the job.

Example of a case study introduction

An example of a case study introduction should be written to provide a roadmap for the reader. It should briefly summarize the topic, identify the problem, and discuss its significance. It should include previous case studies and summarize the literature review. In addition, it should include the purpose of the study, and the issues that it addresses. Using this example as a guideline, writers can make their case study introductions. Here are some tips:

The first paragraph of the introduction should summarize the entire article, and should include the following sections: the case presentation, the examinations performed, and the working diagnosis, the management of the case, and the outcome. The final section, the discussion, should summarize the previous subsections, explain any apparent inconsistencies, and describe the lessons learned. The body of the paper should also summarize the introduction and include any notes for the instructor.

The last section of a case study introduction should summarize the findings and limitations of the study, as well as suggestions for further research. The conclusion section should restate the thesis and main findings of the case study. The conclusion should summarize previous case studies, summarize the findings, and highlight the possibilities for future study. It is important to note that not all educational institutions require the case study analysis format, so it is important to check ahead of time.

The introductory paragraph should outline the overall strategy for the study. It should also describe the short-term and long-term goals of the case study. Using this method will ensure clarity and reduce misunderstandings. However, it is important to consider the end goal. After all, the objective is to communicate the benefits of the product. And, the solution should be measurable. This can be done by highlighting the benefits and minimizing the negatives.

Structure of a case study introduction

The structure of a case study introduction is different from the general introduction of a research paper. The main purpose of the introduction is to set the stage for the rest of the case study. The problem statement must be short and precise to convey the main point of the study. Then, the introduction should summarize the literature review and present the previous case studies that have dealt with the topic. The introduction should end with a thesis statement.

The thesis statement should contain facts and evidence related to the topic. Include the method used, the findings, and discussion. The solution section should describe specific strategies for solving the problem. It should conclude with a call to action for the reader. When using quotations, be sure to cite them properly. The thesis statement must include the problem statement, the methods used, and the expected outcome of the study. The conclusion section should state the case study’s importance.

In the discussion section, state the limitations of the study and explain why they are not significant. In addition, mention any questions unanswered and issues that the study was unable to address. For more information, check out the APA, Harvard, Chicago, and MLA citation styles. Once you know how to structure a case study introduction, you’ll be ready to write it! And remember, there’s always a right and wrong way to write a case study introduction.

During the writing process, you’ll need to make notes on the problems and issues of the case. Write down any ideas and directions that come to mind. Avoid writing neatly. It may impede your creative process, so write down a rough draft first, and then draw it up for your educational instructor. The introduction is an overview of the case study. Include the thesis statement. If you’re writing a case study for an assignment, you’ll also need to provide an overview of the assignment.

Guidelines for writing a case study introduction

A case study is not a formal scientific research report, but it is written for a lay audience. It should be readable and follow the general narrative that was determined in the first step. The introduction should provide background information about the case and its main topic. It should be short, but should introduce the topic and explain its context in just one or two paragraphs. An ideal case study introduction is between three and five sentences.

The case study must be well-designed and logical. It cannot contain opinions or assumptions. The research question must be a logical conclusion based on the findings. This can be done through a spreadsheet program or by consulting a linguistics expert. Once you have identified the major issues, you need to revise the paper. Once you have revised it twice, it should be well-written, concise, and logical.

The conclusion should state the findings, explain their significance, and summarize the main points. The conclusion should move from the detailed to the general level of consideration. The conclusion should also briefly state the limitations of the case study and point out the need for further research in order to fully address the problem. This should be done in a manner that will keep the reader interested in reading the paper. It should be clear about what the case study found and what it means for the research community.

The case study begins with a cover page and an executive summary, depending on your professor’s instructions. It’s important to remember that this is not a mandatory element of the case study. Instead, the executive summary should be brief and include the key points of the study’s analysis. It should be written as if an executive would read it on the run. Ultimately, the executive summary should include all the key points of the case study.

Clarity in a case study introduction

Clarity in a case study introduction should be at the heart of the paper. This section should explain why the case was chosen and how you decided to use it. The case study introduction varies according to the type of subject you are studying and the goals of the study. Here are some examples of clear and effective case study introductions. Read on to find out how to write a successful one. Clarity in a case study introduction begins with a strong thesis statement and ends with a compelling conclusion.

The conclusion of the case study should restate the research question and emphasize its importance. Identify and restate the key findings and describe how they address the research question. If the case study has limitations, discuss the potential for further research. In addition, document the limitations of the case study. Include any limitations of the case study in the conclusion. This will allow readers to make informed decisions about whether or not the findings are relevant to their own practices.

A case study introduction should include a brief discussion of the topic and selected case. It should explain how the study fits into current knowledge. A reader may question the validity of the analysis if it fails to consider all possible outcomes. For example, a case study on railroad crossings may fail to document the obvious outcome of improving the signage at these intersections. Another example would be a study that failed to document the impact of warning signs and speed limits on railroad crossings.

As a conclusion, the case study should also contain a discussion of how the research was conducted. While it may be a case study, the results are not necessarily applicable to other situations. In addition to describing how a solution has solved the problem, a case study should also discuss the causes of the problem. A case study should be based on real data and information. If the case study is not valid, it will not be a good fit for the audience.

Sample of a case study introduction

A good case study introduction serves as a map for the reader to follow. It should identify the research problem and discuss its significance. It should be based on extensive research and should incorporate relevant issues and facts. For example, it may include a short but precise problem statement. The next section of the introduction should include a description of the solution. The final part of the introduction should conclude with the recommended action. Once the reader has a sense of the direction the study will take, they will feel confident in pursuing the study further.

In the case of social sciences, case studies cannot be purely empirical. The results of a case study can be compared with those of other studies, so that the case study’s findings can be assessed against previous research. A case study’s results can help support general conclusions and build theories, while their practical value lies in generating hypotheses. Despite their utility, case studies often contain a bias toward verification and tend to confirm the researcher’s preconceived notions.

In the case of case studies, the conclusions section should state the significance of the findings, stating how the findings of the study differ from other previous studies. Likewise, the conclusion section should summarize the key findings, and make the reader understand how they address the research problem. In the case of a case study, it is crucial to document any limitations that have been identified. After all, a case study is not complete without further research.

After the introduction, the main body of the paper is the case presentation. It should provide information about the case, such as the history, examination results, working diagnosis, management, and outcome. It should conclude with a discussion, explaining the correlations, apparent inconsistencies, and lessons learned. Finally, the conclusion should state whether the case study presented the results in the desired way. The findings should not be overgeneralized, and the conclusions must be derived from this information.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

How to write a case study — examples, templates, and tools

It’s a marketer’s job to communicate the effectiveness of a product or service to potential and current customers to convince them to buy and keep business moving. One of the best methods for doing this is to share success stories that are relatable to prospects and customers based on their pain points, experiences, and overall needs.

That’s where case studies come in. Case studies are an essential part of a content marketing plan. These in-depth stories of customer experiences are some of the most effective at demonstrating the value of a product or service. Yet many marketers don’t use them, whether because of their regimented formats or the process of customer involvement and approval.

A case study is a powerful tool for showcasing your hard work and the success your customer achieved. But writing a great case study can be difficult if you’ve never done it before or if it’s been a while. This guide will show you how to write an effective case study and provide real-world examples and templates that will keep readers engaged and support your business.

In this article, you’ll learn:

What is a case study?

How to write a case study, case study templates, case study examples, case study tools.

A case study is the detailed story of a customer’s experience with a product or service that demonstrates their success and often includes measurable outcomes. Case studies are used in a range of fields and for various reasons, from business to academic research. They’re especially impactful in marketing as brands work to convince and convert consumers with relatable, real-world stories of actual customer experiences.

The best case studies tell the story of a customer’s success, including the steps they took, the results they achieved, and the support they received from a brand along the way. To write a great case study, you need to:

• Celebrate the customer and make them — not a product or service — the star of the story.
• Craft the story with specific audiences or target segments in mind so that the story of one customer will be viewed as relatable and actionable for another customer.
• Write copy that is easy to read and engaging so that readers will gain the insights and messages intended.
• Follow a standardized format that includes all of the essentials a potential customer would find interesting and useful.
• Support all of the claims for success made in the story with data in the forms of hard numbers and customer statements.

Case studies are a type of review but more in depth, aiming to show — rather than just tell — the positive experiences that customers have with a brand. Notably, 89% of consumers read reviews before deciding to buy, and 79% view case study content as part of their purchasing process. When it comes to B2B sales, 52% of buyers rank case studies as an important part of their evaluation process.

Telling a brand story through the experience of a tried-and-true customer matters. The story is relatable to potential new customers as they imagine themselves in the shoes of the company or individual featured in the case study. Showcasing previous customers can help new ones see themselves engaging with your brand in the ways that are most meaningful to them.

Besides sharing the perspective of another customer, case studies stand out from other content marketing forms because they are based on evidence. Whether pulling from client testimonials or data-driven results, case studies tend to have more impact on new business because the story contains information that is both objective (data) and subjective (customer experience) — and the brand doesn’t sound too self-promotional.

Case studies are unique in that there’s a fairly standardized format for telling a customer’s story. But that doesn’t mean there isn’t room for creativity. It’s all about making sure that teams are clear on the goals for the case study — along with strategies for supporting content and channels — and understanding how the story fits within the framework of the company’s overall marketing goals.

Here are the basic steps to writing a good case study.

1. Identify your goal

Start by defining exactly who your case study will be designed to help. Case studies are about specific instances where a company works with a customer to achieve a goal. Identify which customers are likely to have these goals, as well as other needs the story should cover to appeal to them.

The answer is often found in one of the buyer personas that have been constructed as part of your larger marketing strategy. This can include anything from new leads generated by the marketing team to long-term customers that are being pressed for cross-sell opportunities. In all of these cases, demonstrating value through a relatable customer success story can be part of the solution to conversion.

2. Choose your client or subject

Who you highlight matters. Case studies tie brands together that might otherwise not cross paths. A writer will want to ensure that the highlighted customer aligns with their own company’s brand identity and offerings. Look for a customer with positive name recognition who has had great success with a product or service and is willing to be an advocate.

The client should also match up with the identified target audience. Whichever company or individual is selected should be a reflection of other potential customers who can see themselves in similar circumstances, having the same problems and possible solutions.

Some of the most compelling case studies feature customers who:

• Switch from one product or service to another while naming competitors that missed the mark.
• Experience measurable results that are relatable to others in a specific industry.
• Represent well-known brands and recognizable names that are likely to compel action.
• Advocate for a product or service as a champion and are well-versed in its advantages.

Whoever or whatever customer is selected, marketers must ensure they have the permission of the company involved before getting started. Some brands have strict review and approval procedures for any official marketing or promotional materials that include their name. Acquiring those approvals in advance will prevent any miscommunication or wasted effort if there is an issue with their legal or compliance teams.

3. Conduct research and compile data

Substantiating the claims made in a case study — either by the marketing team or customers themselves — adds validity to the story. To do this, include data and feedback from the client that defines what success looks like. This can be anything from demonstrating return on investment (ROI) to a specific metric the customer was striving to improve. Case studies should prove how an outcome was achieved and show tangible results that indicate to the customer that your solution is the right one.

This step could also include customer interviews. Make sure that the people being interviewed are key stakeholders in the purchase decision or deployment and use of the product or service that is being highlighted. Content writers should work off a set list of questions prepared in advance. It can be helpful to share these with the interviewees beforehand so they have time to consider and craft their responses. One of the best interview tactics to keep in mind is to ask questions where yes and no are not natural answers. This way, your subject will provide more open-ended responses that produce more meaningful content.

4. Choose the right format

There are a number of different ways to format a case study. Depending on what you hope to achieve, one style will be better than another. However, there are some common elements to include, such as:

• An engaging headline
• A subject and customer introduction
• The unique challenge or challenges the customer faced
• The solution the customer used to solve the problem
• The results achieved
• Data and statistics to back up claims of success
• A strong call to action (CTA) to engage with the vendor

It’s also important to note that while case studies are traditionally written as stories, they don’t have to be in a written format. Some companies choose to get more creative with their case studies and produce multimedia content, depending on their audience and objectives. Case study formats can include traditional print stories, interactive web or social content, data-heavy infographics, professionally shot videos, podcasts, and more.

5. Write your case study

We’ll go into more detail later about how exactly to write a case study, including templates and examples. Generally speaking, though, there are a few things to keep in mind when writing your case study.

• Be clear and concise. Readers want to get to the point of the story quickly and easily, and they’ll be looking to see themselves reflected in the story right from the start.
• Provide a big picture. Always make sure to explain who the client is, their goals, and how they achieved success in a short introduction to engage the reader.
• Construct a clear narrative. Stick to the story from the perspective of the customer and what they needed to solve instead of just listing product features or benefits.
• Leverage graphics. Incorporating infographics, charts, and sidebars can be a more engaging and eye-catching way to share key statistics and data in readable ways.
• Offer the right amount of detail. Most case studies are one or two pages with clear sections that a reader can skim to find the information most important to them.
• Include data to support claims. Show real results — both facts and figures and customer quotes — to demonstrate credibility and prove the solution works.

6. Promote your story

Marketers have a number of options for distribution of a freshly minted case study. Many brands choose to publish case studies on their website and post them on social media. This can help support SEO and organic content strategies while also boosting company credibility and trust as visitors see that other businesses have used the product or service.

Marketers are always looking for quality content they can use for lead generation. Consider offering a case study as gated content behind a form on a landing page or as an offer in an email message. One great way to do this is to summarize the content and tease the full story available for download after the user takes an action.

Sales teams can also leverage case studies, so be sure they are aware that the assets exist once they’re published. Especially when it comes to larger B2B sales, companies often ask for examples of similar customer challenges that have been solved.

Now that you’ve learned a bit about case studies and what they should include, you may be wondering how to start creating great customer story content. Here are a couple of templates you can use to structure your case study.

Template 1 — Challenge-solution-result format

• Start with an engaging title. This should be fewer than 70 characters long for SEO best practices. One of the best ways to approach the title is to include the customer’s name and a hint at the challenge they overcame in the end.
• Create an introduction. Lead with an explanation as to who the customer is, the need they had, and the opportunity they found with a specific product or solution. Writers can also suggest the success the customer experienced with the solution they chose.
• Present the challenge. This should be several paragraphs long and explain the problem the customer faced and the issues they were trying to solve. Details should tie into the company’s products and services naturally. This section needs to be the most relatable to the reader so they can picture themselves in a similar situation.
• Share the solution. Explain which product or service offered was the ideal fit for the customer and why. Feel free to delve into their experience setting up, purchasing, and onboarding the solution.
• Explain the results. Demonstrate the impact of the solution they chose by backing up their positive experience with data. Fill in with customer quotes and tangible, measurable results that show the effect of their choice.
• Ask for action. Include a CTA at the end of the case study that invites readers to reach out for more information, try a demo, or learn more — to nurture them further in the marketing pipeline. What you ask of the reader should tie directly into the goals that were established for the case study in the first place.

Template 2 — Data-driven format

• Start with an engaging title. Be sure to include a statistic or data point in the first 70 characters. Again, it’s best to include the customer’s name as part of the title.
• Create an overview. Share the customer’s background and a short version of the challenge they faced. Present the reason a particular product or service was chosen, and feel free to include quotes from the customer about their selection process.
• Present data point 1. Isolate the first metric that the customer used to define success and explain how the product or solution helped to achieve this goal. Provide data points and quotes to substantiate the claim that success was achieved.
• Present data point 2. Isolate the second metric that the customer used to define success and explain what the product or solution did to achieve this goal. Provide data points and quotes to substantiate the claim that success was achieved.
• Present data point 3. Isolate the final metric that the customer used to define success and explain what the product or solution did to achieve this goal. Provide data points and quotes to substantiate the claim that success was achieved.
• Summarize the results. Reiterate the fact that the customer was able to achieve success thanks to a specific product or service. Include quotes and statements that reflect customer satisfaction and suggest they plan to continue using the solution.
• Ask for action. Include a CTA at the end of the case study that asks readers to reach out for more information, try a demo, or learn more — to further nurture them in the marketing pipeline. Again, remember that this is where marketers can look to convert their content into action with the customer.

While templates are helpful, seeing a case study in action can also be a great way to learn. Here are some examples of how Adobe customers have experienced success.

Juniper Networks

One example is the Adobe and Juniper Networks case study , which puts the reader in the customer’s shoes. The beginning of the story quickly orients the reader so that they know exactly who the article is about and what they were trying to achieve. Solutions are outlined in a way that shows Adobe Experience Manager is the best choice and a natural fit for the customer. Along the way, quotes from the client are incorporated to help add validity to the statements. The results in the case study are conveyed with clear evidence of scale and volume using tangible data.

The story of Lenovo’s journey with Adobe is one that spans years of planning, implementation, and rollout. The Lenovo case study does a great job of consolidating all of this into a relatable journey that other enterprise organizations can see themselves taking, despite the project size. This case study also features descriptive headers and compelling visual elements that engage the reader and strengthen the content.

Tata Consulting

When it comes to using data to show customer results, this case study does an excellent job of conveying details and numbers in an easy-to-digest manner. Bullet points at the start break up the content while also helping the reader understand exactly what the case study will be about. Tata Consulting used Adobe to deliver elevated, engaging content experiences for a large telecommunications client of its own — an objective that’s relatable for a lot of companies.

Case studies are a vital tool for any marketing team as they enable you to demonstrate the value of your company’s products and services to others. They help marketers do their job and add credibility to a brand trying to promote its solutions by using the experiences and stories of real customers.

When you’re ready to get started with a case study:

• Think about a few goals you’d like to accomplish with your content.
• Make a list of successful clients that would be strong candidates for a case study.
• Reach out to the client to get their approval and conduct an interview.
• Gather the data to present an engaging and effective customer story.

Adobe can help

There are several Adobe products that can help you craft compelling case studies. Adobe Experience Platform helps you collect data and deliver great customer experiences across every channel. Once you’ve created your case studies, Experience Platform will help you deliver the right information to the right customer at the right time for maximum impact.

To learn more, watch the Adobe Experience Platform story .

Keep in mind that the best case studies are backed by data. That’s where Adobe Real-Time Customer Data Platform and Adobe Analytics come into play. With Real-Time CDP, you can gather the data you need to build a great case study and target specific customers to deliver the content to the right audience at the perfect moment.

Watch the Real-Time CDP overview video to learn more.

Finally, Adobe Analytics turns real-time data into real-time insights. It helps your business collect and synthesize data from multiple platforms to make more informed decisions and create the best case study possible.

Request a demo to learn more about Adobe Analytics.

https://business.adobe.com/blog/perspectives/b2b-ecommerce-10-case-studies-inspire-you

https://business.adobe.com/blog/basics/business-case

https://business.adobe.com/blog/basics/what-is-real-time-analytics

How to Write a Case Study: Bookmarkable Guide & Template

Published: November 30, 2023

Earning the trust of prospective customers can be a struggle. Before you can even begin to expect to earn their business, you need to demonstrate your ability to deliver on what your product or service promises.

Sure, you could say that you're great at X or that you're way ahead of the competition when it comes to Y. But at the end of the day, what you really need to win new business is cold, hard proof.

One of the best ways to prove your worth is through a compelling case study. In fact, HubSpot’s 2020 State of Marketing report found that case studies are so compelling that they are the fifth most commonly used type of content used by marketers.

Below, I'll walk you through what a case study is, how to prepare for writing one, what you need to include in it, and how it can be an effective tactic. To jump to different areas of this post, click on the links below to automatically scroll.

Case Study Definition

Case study templates, how to write a case study.

• How to Format a Case Study

Business Case Study Examples

A case study is a specific challenge a business has faced, and the solution they've chosen to solve it. Case studies can vary greatly in length and focus on several details related to the initial challenge and applied solution, and can be presented in various forms like a video, white paper, blog post, etc.

In professional settings, it's common for a case study to tell the story of a successful business partnership between a vendor and a client. Perhaps the success you're highlighting is in the number of leads your client generated, customers closed, or revenue gained. Any one of these key performance indicators (KPIs) are examples of your company's services in action.

When done correctly, these examples of your work can chronicle the positive impact your business has on existing or previous customers and help you attract new clients.

Free Case Study Templates

Showcase your company's success using these three free case study templates.

• Data-Driven Case Study Template
• Product-Specific Case Study Template
• General Case Study Template

You're all set!

Click this link to access this resource at any time.

Why write a case study? 

I know, you’re thinking “ Okay, but why do I need to write one of these? ” The truth is that while case studies are a huge undertaking, they are powerful marketing tools that allow you to demonstrate the value of your product to potential customers using real-world examples. Here are a few reasons why you should write case studies. 

1. Explain Complex Topics or Concepts

Case studies give you the space to break down complex concepts, ideas, and strategies and show how they can be applied in a practical way. You can use real-world examples, like an existing client, and use their story to create a compelling narrative that shows how your product solved their issue and how those strategies can be repeated to help other customers get similar successful results.  

2. Show Expertise

Case studies are a great way to demonstrate your knowledge and expertise on a given topic or industry. This is where you get the opportunity to show off your problem-solving skills and how you’ve generated successful outcomes for clients you’ve worked with. 

3. Build Trust and Credibility

In addition to showing off the attributes above, case studies are an excellent way to build credibility. They’re often filled with data and thoroughly researched, which shows readers you’ve done your homework. They can have confidence in the solutions you’ve presented because they’ve read through as you’ve explained the problem and outlined step-by-step what it took to solve it. All of these elements working together enable you to build trust with potential customers.

4. Create Social Proof

Using existing clients that have seen success working with your brand builds social proof . People are more likely to choose your brand if they know that others have found success working with you. Case studies do just that — putting your success on display for potential customers to see. 

All of these attributes work together to help you gain more clients. Plus you can even use quotes from customers featured in these studies and repurpose them in other marketing content. Now that you know more about the benefits of producing a case study, let’s check out how long these documents should be. 

How long should a case study be?

The length of a case study will vary depending on the complexity of the project or topic discussed. However, as a general guideline, case studies typically range from 500 to 1,500 words. 

Whatever length you choose, it should provide a clear understanding of the challenge, the solution you implemented, and the results achieved. This may be easier said than done, but it's important to strike a balance between providing enough detail to make the case study informative and concise enough to keep the reader's interest.

The primary goal here is to effectively communicate the key points and takeaways of the case study. It’s worth noting that this shouldn’t be a wall of text. Use headings, subheadings, bullet points, charts, and other graphics to break up the content and make it more scannable for readers. We’ve also seen brands incorporate video elements into case studies listed on their site for a more engaging experience. 

Ultimately, the length of your case study should be determined by the amount of information necessary to convey the story and its impact without becoming too long. Next, let’s look at some templates to take the guesswork out of creating one. 

To help you arm your prospects with information they can trust, we've put together a step-by-step guide on how to create effective case studies for your business with free case study templates for creating your own.

Tell us a little about yourself below to gain access today:

And to give you more options, we’ll highlight some useful templates that serve different needs. But remember, there are endless possibilities when it comes to demonstrating the work your business has done.

1. General Case Study Template

Do you have a specific product or service that you’re trying to sell, but not enough reviews or success stories? This Product Specific case study template will help.

This template relies less on metrics, and more on highlighting the customer’s experience and satisfaction. As you follow the template instructions, you’ll be prompted to speak more about the benefits of the specific product, rather than your team’s process for working with the customer.

4. Bold Social Media Business Case Study Template

You can find templates that represent different niches, industries, or strategies that your business has found success in — like a bold social media business case study template.

In this template, you can tell the story of how your social media marketing strategy has helped you or your client through collaboration or sale of your service. Customize it to reflect the different marketing channels used in your business and show off how well your business has been able to boost traffic, engagement, follows, and more.

5. Lead Generation Business Case Study Template

It’s important to note that not every case study has to be the product of a sale or customer story, sometimes they can be informative lessons that your own business has experienced. A great example of this is the Lead Generation Business case study template.

If you’re looking to share operational successes regarding how your team has improved processes or content, you should include the stories of different team members involved, how the solution was found, and how it has made a difference in the work your business does.

Now that we’ve discussed different templates and ideas for how to use them, let’s break down how to create your own case study with one.

• Get started with case study templates.
• Determine the case study's objective.
• Establish a case study medium.
• Find the right case study candidate.
• Contact your candidate for permission to write about them.
• Ensure you have all the resources you need to proceed once you get a response.
• Download a case study email template.
• Define the process you want to follow with the client.
• Ensure you're asking the right questions.
• Layout your case study format.
• Publish and promote your case study.

1. Get started with case study templates.

Telling your customer's story is a delicate process — you need to highlight their success while naturally incorporating your business into their story.

If you're just getting started with case studies, we recommend you download HubSpot's Case Study Templates we mentioned before to kickstart the process.

2. Determine the case study's objective.

All business case studies are designed to demonstrate the value of your services, but they can focus on several different client objectives.

Your first step when writing a case study is to determine the objective or goal of the subject you're featuring. In other words, what will the client have succeeded in doing by the end of the piece?

The client objective you focus on will depend on what you want to prove to your future customers as a result of publishing this case study.

Your case study can focus on one of the following client objectives:

• Complying with government regulation
• Lowering business costs
• Becoming profitable
• Generating more leads
• Closing on more customers
• Generating more revenue
• Expanding into a new market
• Becoming more sustainable or energy-efficient

3. Establish a case study medium.

Next, you'll determine the medium in which you'll create the case study. In other words, how will you tell this story?

Case studies don't have to be simple, written one-pagers. Using different media in your case study can allow you to promote your final piece on different channels. For example, while a written case study might just live on your website and get featured in a Facebook post, you can post an infographic case study on Pinterest and a video case study on your YouTube channel.

Here are some different case study mediums to consider:

Written Case Study

Consider writing this case study in the form of an ebook and converting it to a downloadable PDF. Then, gate the PDF behind a landing page and form for readers to fill out before downloading the piece, allowing this case study to generate leads for your business.

Video Case Study

Plan on meeting with the client and shooting an interview. Seeing the subject, in person, talk about the service you provided them can go a long way in the eyes of your potential customers.

Infographic Case Study

Use the long, vertical format of an infographic to tell your success story from top to bottom. As you progress down the infographic, emphasize major KPIs using bigger text and charts that show the successes your client has had since working with you.

Podcast Case Study

Podcasts are a platform for you to have a candid conversation with your client. This type of case study can sound more real and human to your audience — they'll know the partnership between you and your client was a genuine success.

4. Find the right case study candidate.

Writing about your previous projects requires more than picking a client and telling a story. You need permission, quotes, and a plan. To start, here are a few things to look for in potential candidates.

Product Knowledge

It helps to select a customer who's well-versed in the logistics of your product or service. That way, he or she can better speak to the value of what you offer in a way that makes sense for future customers.

Remarkable Results

Clients that have seen the best results are going to make the strongest case studies. If their own businesses have seen an exemplary ROI from your product or service, they're more likely to convey the enthusiasm that you want prospects to feel, too.

One part of this step is to choose clients who have experienced unexpected success from your product or service. When you've provided non-traditional customers — in industries that you don't usually work with, for example — with positive results, it can help to remove doubts from prospects.

Recognizable Names

While small companies can have powerful stories, bigger or more notable brands tend to lend credibility to your own. In fact, 89% of consumers say they'll buy from a brand they already recognize over a competitor, especially if they already follow them on social media.

Customers that came to you after working with a competitor help highlight your competitive advantage and might even sway decisions in your favor.

5. Contact your candidate for permission to write about them.

To get the case study candidate involved, you have to set the stage for clear and open communication. That means outlining expectations and a timeline right away — not having those is one of the biggest culprits in delayed case study creation.

Most importantly at this point, however, is getting your subject's approval. When first reaching out to your case study candidate, provide them with the case study's objective and format — both of which you will have come up with in the first two steps above.

To get this initial permission from your subject, put yourself in their shoes — what would they want out of this case study? Although you're writing this for your own company's benefit, your subject is far more interested in the benefit it has for them.

Benefits to Offer Your Case Study Candidate

Here are four potential benefits you can promise your case study candidate to gain their approval.

Brand Exposure

Explain to your subject to whom this case study will be exposed, and how this exposure can help increase their brand awareness both in and beyond their own industry. In the B2B sector, brand awareness can be hard to collect outside one's own market, making case studies particularly useful to a client looking to expand their name's reach.

Employee Exposure

Allow your subject to provide quotes with credits back to specific employees. When this is an option for them, their brand isn't the only thing expanding its reach — their employees can get their name out there, too. This presents your subject with networking and career development opportunities they might not have otherwise.

Product Discount

This is a more tangible incentive you can offer your case study candidate, especially if they're a current customer of yours. If they agree to be your subject, offer them a product discount — or a free trial of another product — as a thank-you for their help creating your case study.

Backlinks and Website Traffic

Here's a benefit that is sure to resonate with your subject's marketing team: If you publish your case study on your website, and your study links back to your subject's website — known as a "backlink" — this small gesture can give them website traffic from visitors who click through to your subject's website.

Additionally, a backlink from you increases your subject's page authority in the eyes of Google. This helps them rank more highly in search engine results and collect traffic from readers who are already looking for information about their industry.

6. Ensure you have all the resources you need to proceed once you get a response.

So you know what you’re going to offer your candidate, it’s time that you prepare the resources needed for if and when they agree to participate, like a case study release form and success story letter.

Let's break those two down.

Case Study Release Form

This document can vary, depending on factors like the size of your business, the nature of your work, and what you intend to do with the case studies once they are completed. That said, you should typically aim to include the following in the Case Study Release Form:

• A clear explanation of why you are creating this case study and how it will be used.
• A statement defining the information and potentially trademarked information you expect to include about the company — things like names, logos, job titles, and pictures.
• An explanation of what you expect from the participant, beyond the completion of the case study. For example, is this customer willing to act as a reference or share feedback, and do you have permission to pass contact information along for these purposes?
• A note about compensation.

Success Story Letter

As noted in the sample email, this document serves as an outline for the entire case study process. Other than a brief explanation of how the customer will benefit from case study participation, you'll want to be sure to define the following steps in the Success Story Letter.

7. Download a case study email template.

While you gathered your resources, your candidate has gotten time to read over the proposal. When your candidate approves of your case study, it's time to send them a release form.

A case study release form tells you what you'll need from your chosen subject, like permission to use any brand names and share the project information publicly. Kick-off this process with an email that runs through exactly what they can expect from you, as well as what you need from them. To give you an idea of what that might look like, check out this sample email:

8. Define the process you want to follow with the client.

Before you can begin the case study, you have to have a clear outline of the case study process with your client. An example of an effective outline would include the following information.

The Acceptance

First, you'll need to receive internal approval from the company's marketing team. Once approved, the Release Form should be signed and returned to you. It's also a good time to determine a timeline that meets the needs and capabilities of both teams.

The Questionnaire

To ensure that you have a productive interview — which is one of the best ways to collect information for the case study — you'll want to ask the participant to complete a questionnaire before this conversation. That will provide your team with the necessary foundation to organize the interview, and get the most out of it.

The Interview

Once the questionnaire is completed, someone on your team should reach out to the participant to schedule a 30- to 60-minute interview, which should include a series of custom questions related to the customer's experience with your product or service.

The Draft Review

After the case study is composed, you'll want to send a draft to the customer, allowing an opportunity to give you feedback and edits.

The Final Approval

Once any necessary edits are completed, send a revised copy of the case study to the customer for final approval.

Once the case study goes live — on your website or elsewhere — it's best to contact the customer with a link to the page where the case study lives. Don't be afraid to ask your participants to share these links with their own networks, as it not only demonstrates your ability to deliver positive results and impressive growth, as well.

9. Ensure you're asking the right questions.

Before you execute the questionnaire and actual interview, make sure you're setting yourself up for success. A strong case study results from being prepared to ask the right questions. What do those look like? Here are a few examples to get you started:

• What are your goals?
• What challenges were you experiencing before purchasing our product or service?
• What made our product or service stand out against our competitors?
• What did your decision-making process look like?
• How have you benefited from using our product or service? (Where applicable, always ask for data.)

Keep in mind that the questionnaire is designed to help you gain insights into what sort of strong, success-focused questions to ask during the actual interview. And once you get to that stage, we recommend that you follow the "Golden Rule of Interviewing." Sounds fancy, right? It's actually quite simple — ask open-ended questions.

If you're looking to craft a compelling story, "yes" or "no" answers won't provide the details you need. Focus on questions that invite elaboration, such as, "Can you describe ...?" or, "Tell me about ..."

In terms of the interview structure, we recommend categorizing the questions and flowing them into six specific sections that will mirror a successful case study format. Combined, they'll allow you to gather enough information to put together a rich, comprehensive study.

Open with the customer's business.

The goal of this section is to generate a better understanding of the company's current challenges and goals, and how they fit into the landscape of their industry. Sample questions might include:

• How long have you been in business?
• How many employees do you have?
• What are some of the objectives of your department at this time?

Cite a problem or pain point.

To tell a compelling story, you need context. That helps match the customer's need with your solution. Sample questions might include:

• What challenges and objectives led you to look for a solution?
• What might have happened if you did not identify a solution?
• Did you explore other solutions before this that did not work out? If so, what happened?

Discuss the decision process.

Exploring how the customer decided to work with you helps to guide potential customers through their own decision-making processes. Sample questions might include:

• How did you hear about our product or service?
• Who was involved in the selection process?
• What was most important to you when evaluating your options?

Explain how a solution was implemented.

The focus here should be placed on the customer's experience during the onboarding process. Sample questions might include:

• How long did it take to get up and running?
• Did that meet your expectations?
• Who was involved in the process?

Explain how the solution works.

The goal of this section is to better understand how the customer is using your product or service. Sample questions might include:

• Is there a particular aspect of the product or service that you rely on most?
• Who is using the product or service?

End with the results.

In this section, you want to uncover impressive measurable outcomes — the more numbers, the better. Sample questions might include:

• How is the product or service helping you save time and increase productivity?
• In what ways does that enhance your competitive advantage?
• How much have you increased metrics X, Y, and Z?

10. Lay out your case study format.

When it comes time to take all of the information you've collected and actually turn it into something, it's easy to feel overwhelmed. Where should you start? What should you include? What's the best way to structure it?

To help you get a handle on this step, it's important to first understand that there is no one-size-fits-all when it comes to the ways you can present a case study. They can be very visual, which you'll see in some of the examples we've included below, and can sometimes be communicated mostly through video or photos, with a bit of accompanying text.

Here are the sections we suggest, which we'll cover in more detail down below:

• Title: Keep it short. Develop a succinct but interesting project name you can give the work you did with your subject.
• Subtitle: Use this copy to briefly elaborate on the accomplishment. What was done? The case study itself will explain how you got there.
• Executive Summary : A 2-4 sentence summary of the entire story. You'll want to follow it with 2-3 bullet points that display metrics showcasing success.
• About the Subject: An introduction to the person or company you served, which can be pulled from a LinkedIn Business profile or client website.
• Challenges and Objectives: A 2-3 paragraph description of the customer's challenges, before using your product or service. This section should also include the goals or objectives the customer set out to achieve.
• How Product/Service Helped: A 2-3 paragraph section that describes how your product or service provided a solution to their problem.
• Results: A 2-3 paragraph testimonial that proves how your product or service specifically benefited the person or company and helped achieve its goals. Include numbers to quantify your contributions.
• Supporting Visuals or Quotes: Pick one or two powerful quotes that you would feature at the bottom of the sections above, as well as a visual that supports the story you are telling.
• Future Plans: Everyone likes an epilogue. Comment on what's ahead for your case study subject, whether or not those plans involve you.
• Call to Action (CTA): Not every case study needs a CTA, but putting a passive one at the end of your case study can encourage your readers to take an action on your website after learning about the work you've done.

When laying out your case study, focus on conveying the information you've gathered in the most clear and concise way possible. Make it easy to scan and comprehend, and be sure to provide an attractive call-to-action at the bottom — that should provide readers an opportunity to learn more about your product or service.

11. Publish and promote your case study.

Once you've completed your case study, it's time to publish and promote it. Some case study formats have pretty obvious promotional outlets — a video case study can go on YouTube, just as an infographic case study can go on Pinterest.

But there are still other ways to publish and promote your case study. Here are a couple of ideas:

Lead Gen in a Blog Post

As stated earlier in this article, written case studies make terrific lead-generators if you convert them into a downloadable format, like a PDF. To generate leads from your case study, consider writing a blog post that tells an abbreviated story of your client's success and asking readers to fill out a form with their name and email address if they'd like to read the rest in your PDF.

Then, promote this blog post on social media, through a Facebook post or a tweet.

Published as a Page on Your Website

As a growing business, you might need to display your case study out in the open to gain the trust of your target audience.

Rather than gating it behind a landing page, publish your case study to its own page on your website, and direct people here from your homepage with a "Case Studies" or "Testimonials" button along your homepage's top navigation bar.

Format for a Case Study

The traditional case study format includes the following parts: a title and subtitle, a client profile, a summary of the customer’s challenges and objectives, an account of how your solution helped, and a description of the results. You might also want to include supporting visuals and quotes, future plans, and calls-to-action.

Image Source

The title is one of the most important parts of your case study. It should draw readers in while succinctly describing the potential benefits of working with your company. To that end, your title should:

• State the name of your custome r. Right away, the reader must learn which company used your products and services. This is especially important if your customer has a recognizable brand. If you work with individuals and not companies, you may omit the name and go with professional titles: “A Marketer…”, “A CFO…”, and so forth.
• State which product your customer used . Even if you only offer one product or service, or if your company name is the same as your product name, you should still include the name of your solution. That way, readers who are not familiar with your business can become aware of what you sell.
• Allude to the results achieved . You don’t necessarily need to provide hard numbers, but the title needs to represent the benefits, quickly. That way, if a reader doesn’t stay to read, they can walk away with the most essential information: Your product works.

The example above, “Crunch Fitness Increases Leads and Signups With HubSpot,” achieves all three — without being wordy. Keeping your title short and sweet is also essential.

2. Subtitle

Your subtitle is another essential part of your case study — don’t skip it, even if you think you’ve done the work with the title. In this section, include a brief summary of the challenges your customer was facing before they began to use your products and services. Then, drive the point home by reiterating the benefits your customer experienced by working with you.

The above example reads:

“Crunch Fitness was franchising rapidly when COVID-19 forced fitness clubs around the world to close their doors. But the company stayed agile by using HubSpot to increase leads and free trial signups.”

We like that the case study team expressed the urgency of the problem — opening more locations in the midst of a pandemic — and placed the focus on the customer’s ability to stay agile.

3. Executive Summary

The executive summary should provide a snapshot of your customer, their challenges, and the benefits they enjoyed from working with you. Think it’s too much? Think again — the purpose of the case study is to emphasize, again and again, how well your product works.

The good news is that depending on your design, the executive summary can be mixed with the subtitle or with the “About the Company” section. Many times, this section doesn’t need an explicit “Executive Summary” subheading. You do need, however, to provide a convenient snapshot for readers to scan.

In the above example, ADP included information about its customer in a scannable bullet-point format, then provided two sections: “Business Challenge” and “How ADP Helped.” We love how simple and easy the format is to follow for those who are unfamiliar with ADP or its typical customer.

4. About the Company

Readers need to know and understand who your customer is. This is important for several reasons: It helps your reader potentially relate to your customer, it defines your ideal client profile (which is essential to deter poor-fit prospects who might have reached out without knowing they were a poor fit), and it gives your customer an indirect boon by subtly promoting their products and services.

Feel free to keep this section as simple as possible. You can simply copy and paste information from the company’s LinkedIn, use a quote directly from your customer, or take a more creative storytelling approach.

In the above example, HubSpot included one paragraph of description for Crunch Fitness and a few bullet points. Below, ADP tells the story of its customer using an engaging, personable technique that effectively draws readers in.

5. Challenges and Objectives

The challenges and objectives section of your case study is the place to lay out, in detail, the difficulties your customer faced prior to working with you — and what they hoped to achieve when they enlisted your help.

In this section, you can be as brief or as descriptive as you’d like, but remember: Stress the urgency of the situation. Don’t understate how much your customer needed your solution (but don’t exaggerate and lie, either). Provide contextual information as necessary. For instance, the pandemic and societal factors may have contributed to the urgency of the need.

Take the above example from design consultancy IDEO:

“Educational opportunities for adults have become difficult to access in the United States, just when they’re needed most. To counter this trend, IDEO helped the city of South Bend and the Drucker Institute launch Bendable, a community-powered platform that connects people with opportunities to learn with and from each other.”

We love how IDEO mentions the difficulties the United States faces at large, the efforts its customer is taking to address these issues, and the steps IDEO took to help.

6. How Product/Service Helped

This is where you get your product or service to shine. Cover the specific benefits that your customer enjoyed and the features they gleaned the most use out of. You can also go into detail about how you worked with and for your customer. Maybe you met several times before choosing the right solution, or you consulted with external agencies to create the best package for them.

Whatever the case may be, try to illustrate how easy and pain-free it is to work with the representatives at your company. After all, potential customers aren’t looking to just purchase a product. They’re looking for a dependable provider that will strive to exceed their expectations.

In the above example, IDEO describes how it partnered with research institutes and spoke with learners to create Bendable, a free educational platform. We love how it shows its proactivity and thoroughness. It makes potential customers feel that IDEO might do something similar for them.

The results are essential, and the best part is that you don’t need to write the entirety of the case study before sharing them. Like HubSpot, IDEO, and ADP, you can include the results right below the subtitle or executive summary. Use data and numbers to substantiate the success of your efforts, but if you don’t have numbers, you can provide quotes from your customers.

We can’t overstate the importance of the results. In fact, if you wanted to create a short case study, you could include your title, challenge, solution (how your product helped), and result.

8. Supporting Visuals or Quotes

Let your customer speak for themselves by including quotes from the representatives who directly interfaced with your company.

Visuals can also help, even if they’re stock images. On one side, they can help you convey your customer’s industry, and on the other, they can indirectly convey your successes. For instance, a picture of a happy professional — even if they’re not your customer — will communicate that your product can lead to a happy client.

In this example from IDEO, we see a man standing in a boat. IDEO’s customer is neither the man pictured nor the manufacturer of the boat, but rather Conservation International, an environmental organization. This imagery provides a visually pleasing pattern interrupt to the page, while still conveying what the case study is about.

9. Future Plans

This is optional, but including future plans can help you close on a more positive, personable note than if you were to simply include a quote or the results. In this space, you can show that your product will remain in your customer’s tech stack for years to come, or that your services will continue to be instrumental to your customer’s success.

Alternatively, if you work only on time-bound projects, you can allude to the positive impact your customer will continue to see, even after years of the end of the contract.

10. Call to Action (CTA)

Not every case study needs a CTA, but we’d still encourage it. Putting one at the end of your case study will encourage your readers to take an action on your website after learning about the work you've done.

It will also make it easier for them to reach out, if they’re ready to start immediately. You don’t want to lose business just because they have to scroll all the way back up to reach out to your team.

To help you visualize this case study outline, check out the case study template below, which can also be downloaded here .

You drove the results, made the connection, set the expectations, used the questionnaire to conduct a successful interview, and boiled down your findings into a compelling story. And after all of that, you're left with a little piece of sales enabling gold — a case study.

To show you what a well-executed final product looks like, have a look at some of these marketing case study examples.

1. "Shopify Uses HubSpot CRM to Transform High Volume Sales Organization," by HubSpot

What's interesting about this case study is the way it leads with the customer. This reflects a major HubSpot value, which is to always solve for the customer first. The copy leads with a brief description of why Shopify uses HubSpot and is accompanied by a short video and some basic statistics on the company.

Notice that this case study uses mixed media. Yes, there is a short video, but it's elaborated upon in the additional text on the page. So, while case studies can use one or the other, don't be afraid to combine written copy with visuals to emphasize the project's success.

2. "New England Journal of Medicine," by Corey McPherson Nash

When branding and design studio Corey McPherson Nash showcases its work, it makes sense for it to be visual — after all, that's what they do. So in building the case study for the studio's work on the New England Journal of Medicine's integrated advertising campaign — a project that included the goal of promoting the client's digital presence — Corey McPherson Nash showed its audience what it did, rather than purely telling it.

Notice that the case study does include some light written copy — which includes the major points we've suggested — but lets the visuals do the talking, allowing users to really absorb the studio's services.

3. "Designing the Future of Urban Farming," by IDEO

Here's a design company that knows how to lead with simplicity in its case studies. As soon as the visitor arrives at the page, he or she is greeted with a big, bold photo, and two very simple columns of text — "The Challenge" and "The Outcome."

Immediately, IDEO has communicated two of the case study's major pillars. And while that's great — the company created a solution for vertical farming startup INFARM's challenge — it doesn't stop there. As the user scrolls down, those pillars are elaborated upon with comprehensive (but not overwhelming) copy that outlines what that process looked like, replete with quotes and additional visuals.

4. "Secure Wi-Fi Wins Big for Tournament," by WatchGuard

Then, there are the cases when visuals can tell almost the entire story — when executed correctly. Network security provider WatchGuard can do that through this video, which tells the story of how its services enhanced the attendee and vendor experience at the Windmill Ultimate Frisbee tournament.

5. Rock and Roll Hall of Fame Boosts Social Media Engagement and Brand Awareness with HubSpot

In the case study above , HubSpot uses photos, videos, screenshots, and helpful stats to tell the story of how the Rock and Roll Hall of Fame used the bot, CRM, and social media tools to gain brand awareness.

6. Small Desk Plant Business Ups Sales by 30% With Trello

This case study from Trello is straightforward and easy to understand. It begins by explaining the background of the company that decided to use it, what its goals were, and how it planned to use Trello to help them.

It then goes on to discuss how the software was implemented and what tasks and teams benefited from it. Towards the end, it explains the sales results that came from implementing the software and includes quotes from decision-makers at the company that implemented it.

7. Facebook's Mercedes Benz Success Story

Facebook's Success Stories page hosts a number of well-designed and easy-to-understand case studies that visually and editorially get to the bottom line quickly.

Each study begins with key stats that draw the reader in. Then it's organized by highlighting a problem or goal in the introduction, the process the company took to reach its goals, and the results. Then, in the end, Facebook notes the tools used in the case study.

Showcasing Your Work

You work hard at what you do. Now, it's time to show it to the world — and, perhaps more important, to potential customers. Before you show off the projects that make you the proudest, we hope you follow these important steps that will help you effectively communicate that work and leave all parties feeling good about it.

Editor's Note: This blog post was originally published in February 2017 but was updated for comprehensiveness and freshness in July 2021.

Don't forget to share this post!

Related articles.

How to Market an Ebook: 21 Ways to Promote Your Content Offers

7 Pieces of Content Your Audience Really Wants to See [New Data]

How to Write a Listicle [+ Examples and Ideas]

28 Case Study Examples Every Marketer Should See

What Is a White Paper? [FAQs]

What is an Advertorial? 8 Examples to Help You Write One

How to Create Marketing Offers That Don't Fall Flat

20 Creative Ways To Repurpose Content

16 Important Ways to Use Case Studies in Your Marketing

11 Ways to Make Your Blog Post Interactive

Showcase your company's success using these free case study templates.

Marketing software that helps you drive revenue, save time and resources, and measure and optimize your investments — all on one easy-to-use platform

• Translators
• Graphic Designers

Please enter the email address you used for your account. Your sign in information will be sent to your email address after it has been verified.

Your Step-By-Step Guide To Writing a Case Study

Creating a case study is both an art and a science. It requires making an in-depth exploration of your chosen subject in order to extract meaningful insights and understand the dynamics that more general surveys or statistical research might not uncover. At the same time, your case study also needs to be a compelling read to ensure those insights get attention from other people!

Unsurprisingly, the prospect of crafting an effective case study can be daunting. It calls for strategic planning, careful organization, and clear communication, all of which can be challenging even for experienced researchers. That's why we've created this step-by-step guide, which breaks the process down into manageable steps, demystifying the journey from defining your research question to sharing your findings. Whether you're a seasoned researcher or a first-timer, this guide aims to equip you with the necessary tools and tips to create a case study that's not just informative, but also engaging and impactful.

Are you ready to unlock the potential of case studies? Let's dive in!

What is a case study?

First, it's important to understand what a case study is – and what it isn't.

A case study is a thorough exploration of a specific subject or event over a certain time frame. Case studies are utilized in numerous fields, including sociology, psychology, education, anthropology, business, and the health sciences, and employ various research techniques to shed light on complex issues.

A case study does not provide absolute proof or conclusions that can be universally applied. Because it concentrates on one particular case or just a few cases, the findings might not apply to different contexts or subjects. Case studies also aren't ideal for determining cause-and-effect relationships as they do not use controlled conditions to separate and measure the impacts of different factors. Lastly, it must be said that a case study isn't just a random assortment of facts or observations; it necessitates a clear research question, a methodical approach to data collection and analysis, and a thoughtful interpretation of the results.

Getting started

Now that we've established the definition and purpose of a case study, let's explore the process by which one is created. You can produce a case study by following these nine steps:

1. Define the purpose of your case study

Before you start writing a case study, you need to define its purpose clearly. Ask yourself: What is the research question or problem you aim to solve? What insights are you looking to uncover? Your goals will guide your research design and influence your choice of case. This initial stage of introspection and clarification is crucial as it acts as a roadmap for your study.

2. Select the case to study

Once you've defined your research objective, the next step is to choose a suitable case that can help answer your research question. This might be a unique, critical, or representative instance. Unique cases offer the opportunity to observe and analyze a situation that is unusual or not well-understood. In contrast, a representative or typical case is often chosen because it represents other cases or a broader phenomenon.

In any case, be sure to justify your choice. Explain why the case is of interest and how it can contribute to the knowledge or understanding of the issue at hand. For instance, if you're studying the effects of corporate restructuring on employee morale, you might choose to focus on a company that recently underwent a significant restructure.

3. Conduct a thorough literature review

Performing a literature review involves a careful examination of relevant scholarly articles, books, and other sources related to your research question or problem. In the process, you identify gaps in the current knowledge and determine how your case study can address them. By critically examining existing research, you will not only gain a comprehensive understanding of your chosen topic but also be able to refine your research question or hypothesis, if necessary.

4. Choose a methodological approach

The methodological approach used in your case study will depend on your research objectives and the nature of the case. Methodologies that can be employed in case studies include qualitative, quantitative, and mixed methods .

Qualitative methods are often used when the goal is to explore, understand, or interpret certain phenomena. These involve approaches like interviews, focus groups, or ethnography. Quantitative methods, on the other hand, are used when the goal is to test hypotheses or examine relationships between variables. Quantitative approaches often include experiments. Also, surveys may be either qualitative or quantitative depending on the question design.

You may choose to use a combination of qualitative and quantitative methods (mixed methods) if it suits your research objectives.

5. Collect and organize your data

Data collection should be systematic and organized to maintain the integrity and reliability of your research. You need to plan how you will record and store your data to ensure that it's accessible and usable.

If you're conducting interviews or observations, consider using recording devices (with participant consent) to capture the data accurately. In addition, you may want to transcribe the recorded material for easier analysis. If you're using documents or archival records, develop a system for coding and categorizing the data.

6. Analyze the data

Analysis involves interpreting your data to draw out meaningful insights; it is in this stage that your findings start to take shape. Depending on the nature of your data and your research question, you might use any of a variety of analysis methods. For qualitative data, you might employ thematic analysis to identify key themes or grounded theory to generate a new theoretical framework. For quantitative data, you might use statistical analysis to identify patterns or correlations.

Always be open to unexpected findings. Your initial hypotheses might not be supported, or you might uncover new insights that you hadn't initially considered. Remember that all data, whether they fit neatly into your analysis or not, provide valuable insights and contribute to the holistic understanding of your case.

7. Write the case study report

After analyzing the data, it's finally time to compose your case study. In terms of structure, a typical case study might consist of an introduction, background information, the collected data (results), analysis of that data, and the conclusion. Here's a brief breakdown of each section:

• Introduction: The introduction should be brief but engaging, providing a clear statement of the research question or problem, explaining why the case was chosen, and outlining what the case study will cover.
• Background: The background provides the context for your case. Describe the case, its history, and any relevant information that will help readers understand the situation.
• Results: This section should provide a comprehensive account of what you found, without interpretation or opinion. Present your findings in a clear, organized manner. Use visuals such as charts or graphs if they aid comprehension.
• Analysis: This section should provide your interpretations and arguments. Discuss the patterns, themes, or relationships you've identified in your data. Explain what these findings mean in relation to your research question.
• Conclusion: Finally, summarize the key insights from your case study along with their implications. Discuss the limitations of your study and propose avenues for future research.

8. Review and revise

The process of writing a case study doesn't actually end when the report is written; you also need to review your writing for coherence, clarity, and correctness. Don't underestimate the importance of this step! Make sure the information flows logically and that your arguments are well-supported. Check for any grammar or spelling errors. Having a peer or mentor review your work can be incredibly helpful as they provide a fresh perspective and can catch mistakes you might have missed.

9. Get approval if required

If your case study involves human subjects, you may need to obtain approval from an ethical review board. You'll also need to obtain informed consent from your subjects and ensure you respect their privacy and confidentiality throughout the research process. Always follow your institution's ethical guidelines and any other relevant legislation .

Practical tips for writing a compelling case study

Getting through all those steps can feel like a formidable challenge, but here are some practical tips to make the process more manageable:

Be systematic and organized

Given the importance of detail in case studies, it's vital to be systematic and organized from the get-go. This means keeping meticulous records of your data, your sources, and any changes to your research design. A good practice is to maintain a research journal or log where you can record your process, thoughts, and reflections.

In addition, use technology to your advantage. Digital tools like citation managers can help you keep track of your sources and make formatting references a breeze, while spreadsheet or database software can assist in managing and organizing your data. Developing a consistent system for labeling and storing information at the outset will save you time and effort later when you need to retrieve data for analysis.

Stay focused

One common pitfall in research and writing is loss of focus: getting sidetracked by interesting but ultimately irrelevant digressions, which can be very easy, especially when you're dealing with a rich and complex case. Always remember your research question and objectives, and let these guide your study at every step. It's perfectly acceptable – and in fact advisable – to delineate what your study will not cover. Setting clear boundaries can help you stay focused and manage the scope of your study effectively.

Use visual aids

Visual aids such as charts, diagrams, or photographs can greatly enhance your case study. They provide readers with a break from the monotony of text and can communicate complex data or relationships more easily. For instance, if you're presenting a lot of numerical data, consider using a chart or graph. If you're describing a process or sequence of events, portraying it in a flowchart or timeline might be useful. Remember, the goal is to aid comprehension, so make sure your visual aids are clear, well-labeled, and integrated into the text.

Include direct quotes

If your case study involves interviews, including direct quotes can add depth and a sense of the personal to your findings. They provide readers with a firsthand perspective and make your case study more engaging.

When using quotes, be sure to integrate them smoothly into your text. Provide enough context so readers understand the quote's relevance. Also, remember to adhere to ethical guidelines– always respect confidentiality and anonymity agreements.

Maintain ethical standards

Ethics is a fundamental consideration in all research, including case studies. Ensure you have proper consent from participants, respect their privacy, and accurately present your findings without manipulation.

Misrepresenting data or failing to respect participants' rights can lead to serious ethical violations. Always follow your institution's ethical guidelines and any other relevant legislation. If in doubt, seek advice from a supervisor or your institution's ethics committee.

Acknowledge limitations

Every research study has limitations, which could relate to the research design, data collection methods, or other aspects of the study. Being transparent about the limitations of your study can enhance its credibility; moreover, not only does identifying limitations demonstrate your critical thinking and honesty, but it also helps readers accurately interpret your findings.

Finally, acknowledging the limitations of your work helps to set the stage for further research. By identifying aspects that your study couldn't address, you provide other researchers with avenues for building on your findings.

Learn from examples

Before you start writing your case study, it can be helpful to review some published case studies in your field. Different fields may have different conventions, and familiarizing yourself with case studies in your own field can help guide your writing. Look at the structure, tone, and style. Pay attention to how the authors present and analyze data, and how they link their findings back to the research question. You can also learn a lot from the strengths and weaknesses of previously published works. However, remember to develop your own unique voice and perspective – don't just mimic what others have done.

Design for triangulation

Triangulation involves using multiple data sources or methods to gain a more comprehensive and balanced understanding of your research topic. By coming at your research question from multiple directions, such as by examining different datasets or using different methods, you can increase the validity of your results and gain more nuanced insights.

For example, if you're studying the impact of a new teaching method in a school, you might observe classes, interview teachers, and also survey students. Each method will provide a slightly different perspective, and together, they allow you to develop a more complete picture of the teaching method's impact.

Practice reflexivity

Reflexivity involves reflecting on how your assumptions, values, or experiences might influence your research process and interpretations. As a researcher, it's essential to be aware of your potential biases and how they might shape your study.

Consider keeping a reflexivity journal where you can note your thoughts, feelings, and reflections throughout the research process. This practice can help you stay aware of your biases and ensure your research is as objective and balanced as possible.

Write for your audience

Always make sure that your writing is on target for your intended audience. If you're writing for an academic audience, for example, you'll likely use a more formal tone and include more detailed methodological information. If you're writing for practitioners or a general audience, you might use a more accessible language and focus more on practical implications.

Remember to define any technical terms or jargon, and provide sufficient context so your readers can understand your research. The goal is to communicate your findings effectively, regardless of who your readers are.

Seek feedback

Feedback is valuable for improving your case study. Consider sharing drafts with your peers, mentors, or supervisors and asking for their input. Fresh eyes can provide different perspectives, catch errors, or suggest ways to strengthen your arguments.

Remember, feedback is not personal; it's about improving your work. Be open to critique and willing to revise your work based on the feedback you receive.

Writing a case study is a meticulous process that requires clear purpose, careful planning, systematic data collection, and thoughtful analysis. Although it can be time-consuming, the rich, detailed insights a well-executed case study can provide make this study design an invaluable tool in research.

By following this guide and adopting its practical tips, you will be well on your way to crafting a compelling case study that contributes meaningful insights to your chosen field. Good luck with your research journey!

Header image by Kateryna Hliznitsova .

Related Posts

50 Twitter Accounts That All Academic Writers Should Follow

How to Write the Perfect Process Analysis Essay (With a Sample Essay)

• Academic Writing Advice
• All Blog Posts
• Writing Advice
• Admissions Writing Advice
• Book Writing Advice
• Short Story Advice
• Employment Writing Advice
• Business Writing Advice
• Web Content Advice
• Article Writing Advice
• Magazine Writing Advice
• Grammar Advice
• Dialect Advice
• Editing Advice
• Freelance Advice
• Legal Writing Advice
• Poetry Advice
• Graphic Design Advice
• Logo Design Advice
• Translation Advice
• Blog Reviews
• Short Story Award Winners
• Scholarship Winners

Need an academic editor before submitting your work?

All You Wanted to Know About How to Write a Case Study

What do you study in your college? If you are a psychology, sociology, or anthropology student, we bet you might be familiar with what a case study is. This research method is used to study a certain person, group, or situation. In this guide from our dissertation writing service , you will learn how to write a case study professionally, from researching to citing sources properly. Also, we will explore different types of case studies and show you examples — so that you won’t have any other questions left.

What Is a Case Study?

A case study is a subcategory of research design which investigates problems and offers solutions. Case studies can range from academic research studies to corporate promotional tools trying to sell an idea—their scope is quite vast.

What Is the Difference Between a Research Paper and a Case Study?

While research papers turn the reader’s attention to a certain problem, case studies go even further. Case study guidelines require students to pay attention to details, examining issues closely and in-depth using different research methods. For example, case studies may be used to examine court cases if you study Law, or a patient's health history if you study Medicine. Case studies are also used in Marketing, which are thorough, empirically supported analysis of a good or service's performance. Well-designed case studies can be valuable for prospective customers as they can identify and solve the potential customers pain point.

Case studies involve a lot of storytelling – they usually examine particular cases for a person or a group of people. This method of research is very helpful, as it is very practical and can give a lot of hands-on information. Most commonly, the length of the case study is about 500-900 words, which is much less than the length of an average research paper.

The structure of a case study is very similar to storytelling. It has a protagonist or main character, which in your case is actually a problem you are trying to solve. You can use the system of 3 Acts to make it a compelling story. It should have an introduction, rising action, a climax where transformation occurs, falling action, and a solution.

Here is a rough formula for you to use in your case study:

Problem (Act I): > Solution (Act II) > Result (Act III) > Conclusion.

Types of Case Studies

The purpose of a case study is to provide detailed reports on an event, an institution, a place, future customers, or pretty much anything. There are a few common types of case study, but the type depends on the topic. The following are the most common domains where case studies are needed:

• Historical case studies are great to learn from. Historical events have a multitude of source info offering different perspectives. There are always modern parallels where these perspectives can be applied, compared, and thoroughly analyzed.
• Problem-oriented case studies are usually used for solving problems. These are often assigned as theoretical situations where you need to immerse yourself in the situation to examine it. Imagine you’re working for a startup and you’ve just noticed a significant flaw in your product’s design. Before taking it to the senior manager, you want to do a comprehensive study on the issue and provide solutions. On a greater scale, problem-oriented case studies are a vital part of relevant socio-economic discussions.
• Cumulative case studies collect information and offer comparisons. In business, case studies are often used to tell people about the value of a product.
• Critical case studies explore the causes and effects of a certain case.
• Illustrative case studies describe certain events, investigating outcomes and lessons learned.

Need a compelling case study? EssayPro has got you covered. Our experts are ready to provide you with detailed, insightful case studies that capture the essence of real-world scenarios. Elevate your academic work with our professional assistance.

Case Study Format

The case study format is typically made up of eight parts:

• Executive Summary. Explain what you will examine in the case study. Write an overview of the field you’re researching. Make a thesis statement and sum up the results of your observation in a maximum of 2 sentences.
• Background. Provide background information and the most relevant facts. Isolate the issues.
• Case Evaluation. Isolate the sections of the study you want to focus on. In it, explain why something is working or is not working.
• Proposed Solutions. Offer realistic ways to solve what isn’t working or how to improve its current condition. Explain why these solutions work by offering testable evidence.
• Conclusion. Summarize the main points from the case evaluations and proposed solutions. 6. Recommendations. Talk about the strategy that you should choose. Explain why this choice is the most appropriate.
• Implementation. Explain how to put the specific strategies into action.
• References. Provide all the citations.

How to Write a Case Study

Let's discover how to write a case study.

Setting Up the Research

When writing a case study, remember that research should always come first. Reading many different sources and analyzing other points of view will help you come up with more creative solutions. You can also conduct an actual interview to thoroughly investigate the customer story that you'll need for your case study. Including all of the necessary research, writing a case study may take some time. The research process involves doing the following:

• Define your objective. Explain the reason why you’re presenting your subject. Figure out where you will feature your case study; whether it is written, on video, shown as an infographic, streamed as a podcast, etc.
• Determine who will be the right candidate for your case study. Get permission, quotes, and other features that will make your case study effective. Get in touch with your candidate to see if they approve of being part of your work. Study that candidate’s situation and note down what caused it.
• Identify which various consequences could result from the situation. Follow these guidelines on how to start a case study: surf the net to find some general information you might find useful.
• Make a list of credible sources and examine them. Seek out important facts and highlight problems. Always write down your ideas and make sure to brainstorm.
• Focus on several key issues – why they exist, and how they impact your research subject. Think of several unique solutions. Draw from class discussions, readings, and personal experience. When writing a case study, focus on the best solution and explore it in depth. After having all your research in place, writing a case study will be easy. You may first want to check the rubric and criteria of your assignment for the correct case study structure.

Read Also: ' WHAT IS A CREDIBLE SOURCES ?'

Although your instructor might be looking at slightly different criteria, every case study rubric essentially has the same standards. Your professor will want you to exhibit 8 different outcomes:

• Correctly identify the concepts, theories, and practices in the discipline.
• Identify the relevant theories and principles associated with the particular study.
• Evaluate legal and ethical principles and apply them to your decision-making.
• Recognize the global importance and contribution of your case.
• Construct a coherent summary and explanation of the study.
• Demonstrate analytical and critical-thinking skills.
• Explain the interrelationships between the environment and nature.
• Integrate theory and practice of the discipline within the analysis.

Need Case Study DONE FAST?

Pick a topic, tell us your requirements and get your paper on time.

Case Study Outline

Let's look at the structure of an outline based on the issue of the alcoholic addiction of 30 people.

Introduction

• Statement of the issue: Alcoholism is a disease rather than a weakness of character.
• Presentation of the problem: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there.
• Explanation of the terms: In the past, alcoholism was commonly referred to as alcohol dependence or alcohol addiction. Alcoholism is now the more severe stage of this addiction in the disorder spectrum.
• Hypotheses: Drinking in excess can lead to the use of other drugs.
• Importance of your story: How the information you present can help people with their addictions.
• Background of the story: Include an explanation of why you chose this topic.
• Presentation of analysis and data: Describe the criteria for choosing 30 candidates, the structure of the interview, and the outcomes.
• Strong argument 1: ex. X% of candidates dealing with anxiety and depression...
• Strong argument 2: ex. X amount of people started drinking by their mid-teens.
• Strong argument 3: ex. X% of respondents’ parents had issues with alcohol.
• Concluding statement: I have researched if alcoholism is a disease and found out that…
• Recommendations: Ways and actions for preventing alcohol use.

Writing a Case Study Draft

After you’ve done your case study research and written the outline, it’s time to focus on the draft. In a draft, you have to develop and write your case study by using: the data which you collected throughout the research, interviews, and the analysis processes that were undertaken. Follow these rules for the draft:

• Your draft should contain at least 4 sections: an introduction; a body where you should include background information, an explanation of why you decided to do this case study, and a presentation of your main findings; a conclusion where you present data; and references.
• In the introduction, you should set the pace very clearly. You can even raise a question or quote someone you interviewed in the research phase. It must provide adequate background information on the topic. The background may include analyses of previous studies on your topic. Include the aim of your case here as well. Think of it as a thesis statement. The aim must describe the purpose of your work—presenting the issues that you want to tackle. Include background information, such as photos or videos you used when doing the research.
• Describe your unique research process, whether it was through interviews, observations, academic journals, etc. The next point includes providing the results of your research. Tell the audience what you found out. Why is this important, and what could be learned from it? Discuss the real implications of the problem and its significance in the world.
• Include quotes and data (such as findings, percentages, and awards). This will add a personal touch and better credibility to the case you present. Explain what results you find during your interviews in regards to the problem and how it developed. Also, write about solutions which have already been proposed by other people who have already written about this case.
• At the end of your case study, you should offer possible solutions, but don’t worry about solving them yourself.

Use Data to Illustrate Key Points in Your Case Study

Even though your case study is a story, it should be based on evidence. Use as much data as possible to illustrate your point. Without the right data, your case study may appear weak and the readers may not be able to relate to your issue as much as they should. Let's see the examples from essay writing service :

‍ With data: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there. Without data: A lot of people suffer from alcoholism in the United States.

Try to include as many credible sources as possible. You may have terms or sources that could be hard for other cultures to understand. If this is the case, you should include them in the appendix or Notes for the Instructor or Professor.

Finalizing the Draft: Checklist

After you finish drafting your case study, polish it up by answering these ‘ask yourself’ questions and think about how to end your case study:

• Check that you follow the correct case study format, also in regards to text formatting.
• Check that your work is consistent with its referencing and citation style.
• Micro-editing — check for grammar and spelling issues.
• Macro-editing — does ‘the big picture’ come across to the reader? Is there enough raw data, such as real-life examples or personal experiences? Have you made your data collection process completely transparent? Does your analysis provide a clear conclusion, allowing for further research and practice?

Problems to avoid:

• Overgeneralization – Do not go into further research that deviates from the main problem.
• Failure to Document Limitations – Just as you have to clearly state the limitations of a general research study, you must describe the specific limitations inherent in the subject of analysis.
• Failure to Extrapolate All Possible Implications – Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings.

How to Create a Title Page and Cite a Case Study

Let's see how to create an awesome title page.

Your title page depends on the prescribed citation format. The title page should include:

• A title that attracts some attention and describes your study
• The title should have the words “case study” in it
• The title should range between 5-9 words in length
• Your name and contact information
• Your finished paper should be only 500 to 1,500 words in length.With this type of assignment, write effectively and avoid fluff

Here is a template for the APA and MLA format title page:

There are some cases when you need to cite someone else's study in your own one – therefore, you need to master how to cite a case study. A case study is like a research paper when it comes to citations. You can cite it like you cite a book, depending on what style you need.

Citation Example in MLA ‍ Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies. Boston: Harvard Business Publishing, 2008. Print.

Citation Example in APA ‍ Hill, L., Khanna, T., & Stecker, E. A. (2008). HCL Technologies. Boston: Harvard Business Publishing.

Citation Example in Chicago Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies.

Case Study Examples

To give you an idea of a professional case study example, we gathered and linked some below.

Eastman Kodak Case Study

Case Study Example: Audi Trains Mexican Autoworkers in Germany

To conclude, a case study is one of the best methods of getting an overview of what happened to a person, a group, or a situation in practice. It allows you to have an in-depth glance at the real-life problems that businesses, healthcare industry, criminal justice, etc. may face. This insight helps us look at such situations in a different light. This is because we see scenarios that we otherwise would not, without necessarily being there. If you need custom essays , try our research paper writing services .

Get Help Form Qualified Writers

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. If you’re having trouble with your case study, help with essay request - we'll help. EssayPro writers have read and written countless case studies and are experts in endless disciplines. Request essay writing, editing, or proofreading assistance from our custom case study writing service , and all of your worries will be gone.

Don't Know Where to Start?

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. Request ' write my case study ' assistance from our service.

What Is A Case Study?

How to cite a case study in apa, how to write a case study.

Daniel Parker

is a seasoned educational writer focusing on scholarship guidance, research papers, and various forms of academic essays including reflective and narrative essays. His expertise also extends to detailed case studies. A scholar with a background in English Literature and Education, Daniel’s work on EssayPro blog aims to support students in achieving academic excellence and securing scholarships. His hobbies include reading classic literature and participating in academic forums.

is an expert in nursing and healthcare, with a strong background in history, law, and literature. Holding advanced degrees in nursing and public health, his analytical approach and comprehensive knowledge help students navigate complex topics. On EssayPro blog, Adam provides insightful articles on everything from historical analysis to the intricacies of healthcare policies. In his downtime, he enjoys historical documentaries and volunteering at local clinics.

Related Articles

• Jump to menu
• Student Home
• Accept your offer
• How to enrol
• Student ID card
• Set up your IT
• Orientation Week
• Fees & payment
• Academic calendar
• Special consideration
• Transcripts
• The Nucleus: Student Hub
• Referencing
• Essay writing
• Learning abroad & exchange
• Professional development & UNSW Advantage
• Employability
• Financial assistance
• International students
• Equitable learning
• Postgraduate research
• Health Service
• Events & activities
• Emergencies
• Volunteering
• Clubs and societies
• Accommodation
• Health services
• Sport and gym
• Arc student organisation
• Security on campus
• Maps of campus
• Careers portal
• Change password

Writing the Case Study

How should i approach it.

Investigating and writing up a report will require the completion of specific stages. You will need to timetable sufficient time to complete each stage, but also be aware that some stages are revisited while you are analysing the case and writing the report. Thinking and writing becomes a cyclical process.

Stages essential for analysing and writing a case study report may include:

1. Define the task

Your first step is to read the case and all the instructions for the assignment.

Use the checklist as a guide. You can print out this checklist to record your definition of the task. You may find it helpful to compare and discuss your understanding of the task with other students or colleagues. Try to visualise all the elements of the problem by using mind-maps to chart the main issues on a large piece of paper.

Checklist for defining the task

2. consider which theories and analysis tools may apply to the situation.

Your course notes, text books and readings should indicate the appropriate methodology for your case study analysis

Identify the problems

In your initial analysis you should identify the problems (issues/risks etc.) inherent in the case. Read to uncover the organisation's history of success and failure in relation to the case, the communication processes that are occurring, and relevant current strengths and weaknesses of the organisation or its activities that relate to the case.

A useful technique here is to create a mind-map of the situation, the processes and problems or issues. Use the mind-map to separate the problem elements and to note the most important and their relationships.

In your notes, document the causes and consequences of the problems highlighted in the case and also your preliminary ideas for solutions. Be prepared to discover more problems and solutions as you continue your analysis of the case!

Apply analysis tools

There are many tools available for analysis in the management and engineering fields but you need to evaluate which tools would best apply to your assessment of the issues/problems / risks etc. If you are unsure about which tool to use, read the rationale and purpose of each tool and discuss the options with your colleagues and course facilitator.

Document your results and ideas

It is important to create a complete set of notes that will be useful to refer to when writing up the case study report. For this reason record your findings and your own thoughts on the case. Also clearly document any testing, calculations or specifications that relate to your investigation of solutions as well.

3. Make recommendations and form conclusions

Make recommendations.

Recommendations are a clear statement (in text and/or table format) of what action should be taken to minimise, solve or remove the problems being investigated. Recommendations usually require a detailed action plan for implementation of a solution or a range of solutions depending on future events/scenarios.

According to Jarvis (2002), "for each part of your solution ask: 

• Will it work - why - what could possibly go wrong?
• Who will do it, are they capable, who else might be, who might be block?
• When- timing-sequence?
• How and how much –cost it out- where are the pay offs/savings?"

Form conclusions

Conclusions are drawn from your analysis and assessment of the situation. You usually consider must and desirable objectives. Also consider the limitations of your recommendations based on your testing of solutions and original assumptions that had to be made in the case.

4. Write the report

This section provides some advice on the process of writing up your report.

Plan the report 

Before you begin to write the report, it is essential to have a plan of its structure. You can begin to plan the report while you are investigating the case.

Fist, prepare an outline (in list or mind-map format) of the main headings and subheadings you will have in the report. Then add notes and ideas to the outline which remind you of what you want to achieve in each section and subsection. Use the outline to help you consider what information to include, where it should go and in what sequence. Be prepared to change your outline as your ideas develop. Finally, the outline headings and subheadings can be converted into the contents page of your report. 

Schedule your writing time

Prepare a schedule for writing and editing the sections of the report. Allow some extra time just in case you find some sections difficult to write. Begin by writing the sections you feel most confident about. Preliminary sections (executive summary, introduction) and supplementary sections (conclusions, reference list and appendices) are usually prepared last. Some writers like to begin with their conclusions (where the writer's thoughts are at that moment) or the methodology (it's easier to write about your own work). 

Analyse your audience 

In writing a case study report in your course, the report is often intended for an imaginary person so you need to make sure that your language and style suites that person. For example, a report for senior management will be different in content and style and language to a technical report. A report to a community group would also be different again in content, style and language. Audience definition helps you decide what to include in the report based on what readers need to know to perform their jobs better or what the readers need to know to increase their knowledge about your subject. These notes on audience analysis are adapted from Huckin and Olsen (p1991)

*After: Huckin & Olsen ,1991.1.

• Who will read the report? Think about all the uses of the report and where and when it would be read. Reports written within an organisation may be read by different people and different departments; for example, technical and design specialists, supervisors, senior managers, lawyers, marketing and finance specialists.
• What are the readers' needs and goals? Each department or unit in an organisation has its own needs and goals. Understanding the different perspectives can help you decide how to communicate persuasively to these groups. For example while design engineers may prefer to develop new or alternative design to show progress in their field, the marketing specialist may prefer that the organisation imitate a known successful design to save time.
• How do I make communication clear for managers? Communication must be accessible and useful to busy managers as they will primarily seek important generalisations. This has implications for the report's structure, the amount of orientation or background information provided and the level of technical language used. An executive summary, introductions to new sections and concluding summaries for major sections should be included in the report.
• What might be the readers' preferences or objections to the report? You may need to address the significance and benefits/limitations of your recommendations from a number of readers' perspectives in the report. You may also need to consider compromises as a way to acknowledge potential conflicts or criticisms of your recommendations or solutions.

Prepare a draft report 

Writers rarely produce a perfect piece of text in their first attempt so a number of drafts are usually produced. Careful planning and editing will ensure a consistent professional standard in the report. You will need to do the following:

• Revise the task often 

Do this by keeping both the reader's needs and the report's objectives in mind as you gather information, take notes and write sections of the report.

• Be selective 

Do this by taking clear notes, which include the information gathered and your thoughts about the usefulness and the implications of this information. Review your notes to decide what is essential information to include in the report.

• Create a logical structure 

Use your contents page outline to decide where information will go. Within each section, plan the subheadings and then decide on the sequence of information within these.

Check that your writing flows and that your ideas are supported and plausible. If you are not sure what to look for, here are links to advice and activities on report organisation, cohesion and evidence.

Ensure that all your figures and tables communicate a clear message. Show a colleague your visuals to check how they will be interpreted or 'read'.

• Edit, edit, edit

For first drafts, a word processor's spell checker and grammar checker can be useful however, do not rely solely on these tools in your final edit as they are not perfect. Errors will be overlooked or even created by these programs! The best ways to edit are to read a printed copy and where possible get a colleague to read and give feedback.

Here is a report checklist that you can print out: CHECKLIST

5. Prepare the reference list

The reference list is a list of all the sources you refer to in the report. If you do not reference sources of information, your assignment could be failed. As you read and take notes remember to collect the following information so that you can easily and quickly assemble your reference list.

 Further advice on the conventions for formatting reference lists and 'in text' references can be found in the Academic Skills toolkit .

6. Prepare cover/title page

Check your course requirements on the content and layout of the title page. As a general rule include the following:

• Institution the authors are affiliated with: eg UNSW School of Safety Science
• Title of the report

Eg "BHP Billiton Risk Assessment: Strategic Political Risks to BHP's Operations In Angola". 

• Author/s names (+ student numbers)
• Course name and code
• Date document was submitted

7. Final edit

At this stage it is best if you can leave the report for a day or so before conducting a final proof-read. This assists you to approach your report as a 'reader' rather than as the 'writer' so you will more easily see errors. You should expect to spend a couple of hours on this task.

• Reread the assignment guidelines so the task is fresh in your mind. Read the whole report to check that there is a logical structure to the whole report.
• Check each section of the report (including your executive summary, introduction and conclusion) for content and structure. Note changes to make in the sequence of sections.
• Note (highlight) changes you wish to make within sections (delete, simplify, expand, reorganise). In particular look closely at transition sections, figures and tables, sentences, referencing conventions and document formatting.
• Read through the report and make changes as required.

Here are some editing activities for you to try!

How is a case study organised?

Engineering & science

• Report writing
• Technical writing
• Writing lab reports
• Honours thesis writing
• Editing Activities
• Report Writing Checklist
• How a case study is organised
• What is the marker looking for?
• How can I improve my writing?
• ^ More support

News and notices

Guide to Using Microsoft Copilot with Commercial Data Protection for UNSW Students Published:  20 May 2024

Ethical and Responsible Use of Artificial Intelligence at UNSW Published:  17 May 2024

Discover your Library: Main Library 23 May 2024

Organizing Your Social Sciences Research Assignments

• Annotated Bibliography
• Analyzing a Scholarly Journal Article
• Group Presentations
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Leading a Class Discussion
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Analysis Paper
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Reflective Paper
• Writing a Research Proposal
• Generative AI and Writing
• Acknowledgments

Definition and Introduction

Case analysis is a problem-based teaching and learning method that involves critically analyzing complex scenarios within an organizational setting for the purpose of placing the student in a “real world” situation and applying reflection and critical thinking skills to contemplate appropriate solutions, decisions, or recommended courses of action. It is considered a more effective teaching technique than in-class role playing or simulation activities. The analytical process is often guided by questions provided by the instructor that ask students to contemplate relationships between the facts and critical incidents described in the case.

Cases generally include both descriptive and statistical elements and rely on students applying abductive reasoning to develop and argue for preferred or best outcomes [i.e., case scenarios rarely have a single correct or perfect answer based on the evidence provided]. Rather than emphasizing theories or concepts, case analysis assignments emphasize building a bridge of relevancy between abstract thinking and practical application and, by so doing, teaches the value of both within a specific area of professional practice.

Given this, the purpose of a case analysis paper is to present a structured and logically organized format for analyzing the case situation. It can be assigned to students individually or as a small group assignment and it may include an in-class presentation component. Case analysis is predominately taught in economics and business-related courses, but it is also a method of teaching and learning found in other applied social sciences disciplines, such as, social work, public relations, education, journalism, and public administration.

Ellet, William. The Case Study Handbook: A Student's Guide . Revised Edition. Boston, MA: Harvard Business School Publishing, 2018; Christoph Rasche and Achim Seisreiner. Guidelines for Business Case Analysis . University of Potsdam; Writing a Case Analysis . Writing Center, Baruch College; Volpe, Guglielmo. "Case Teaching in Economics: History, Practice and Evidence." Cogent Economics and Finance 3 (December 2015). doi:https://doi.org/10.1080/23322039.2015.1120977.

How to Approach Writing a Case Analysis Paper

The organization and structure of a case analysis paper can vary depending on the organizational setting, the situation, and how your professor wants you to approach the assignment. Nevertheless, preparing to write a case analysis paper involves several important steps. As Hawes notes, a case analysis assignment “...is useful in developing the ability to get to the heart of a problem, analyze it thoroughly, and to indicate the appropriate solution as well as how it should be implemented” [p.48]. This statement encapsulates how you should approach preparing to write a case analysis paper.

Before you begin to write your paper, consider the following analytical procedures:

• Review the case to get an overview of the situation . A case can be only a few pages in length, however, it is most often very lengthy and contains a significant amount of detailed background information and statistics, with multilayered descriptions of the scenario, the roles and behaviors of various stakeholder groups, and situational events. Therefore, a quick reading of the case will help you gain an overall sense of the situation and illuminate the types of issues and problems that you will need to address in your paper. If your professor has provided questions intended to help frame your analysis, use them to guide your initial reading of the case.
• Read the case thoroughly . After gaining a general overview of the case, carefully read the content again with the purpose of understanding key circumstances, events, and behaviors among stakeholder groups. Look for information or data that appears contradictory, extraneous, or misleading. At this point, you should be taking notes as you read because this will help you develop a general outline of your paper. The aim is to obtain a complete understanding of the situation so that you can begin contemplating tentative answers to any questions your professor has provided or, if they have not provided, developing answers to your own questions about the case scenario and its connection to the course readings,lectures, and class discussions.
• Determine key stakeholder groups, issues, and events and the relationships they all have to each other . As you analyze the content, pay particular attention to identifying individuals, groups, or organizations described in the case and identify evidence of any problems or issues of concern that impact the situation in a negative way. Other things to look for include identifying any assumptions being made by or about each stakeholder, potential biased explanations or actions, explicit demands or ultimatums , and the underlying concerns that motivate these behaviors among stakeholders. The goal at this stage is to develop a comprehensive understanding of the situational and behavioral dynamics of the case and the explicit and implicit consequences of each of these actions.
• Identify the core problems . The next step in most case analysis assignments is to discern what the core [i.e., most damaging, detrimental, injurious] problems are within the organizational setting and to determine their implications. The purpose at this stage of preparing to write your analysis paper is to distinguish between the symptoms of core problems and the core problems themselves and to decide which of these must be addressed immediately and which problems do not appear critical but may escalate over time. Identify evidence from the case to support your decisions by determining what information or data is essential to addressing the core problems and what information is not relevant or is misleading.
• Explore alternative solutions . As noted, case analysis scenarios rarely have only one correct answer. Therefore, it is important to keep in mind that the process of analyzing the case and diagnosing core problems, while based on evidence, is a subjective process open to various avenues of interpretation. This means that you must consider alternative solutions or courses of action by critically examining strengths and weaknesses, risk factors, and the differences between short and long-term solutions. For each possible solution or course of action, consider the consequences they may have related to their implementation and how these recommendations might lead to new problems. Also, consider thinking about your recommended solutions or courses of action in relation to issues of fairness, equity, and inclusion.
• Decide on a final set of recommendations . The last stage in preparing to write a case analysis paper is to assert an opinion or viewpoint about the recommendations needed to help resolve the core problems as you see them and to make a persuasive argument for supporting this point of view. Prepare a clear rationale for your recommendations based on examining each element of your analysis. Anticipate possible obstacles that could derail their implementation. Consider any counter-arguments that could be made concerning the validity of your recommended actions. Finally, describe a set of criteria and measurable indicators that could be applied to evaluating the effectiveness of your implementation plan.

Use these steps as the framework for writing your paper. Remember that the more detailed you are in taking notes as you critically examine each element of the case, the more information you will have to draw from when you begin to write. This will save you time.

NOTE : If the process of preparing to write a case analysis paper is assigned as a student group project, consider having each member of the group analyze a specific element of the case, including drafting answers to the corresponding questions used by your professor to frame the analysis. This will help make the analytical process more efficient and ensure that the distribution of work is equitable. This can also facilitate who is responsible for drafting each part of the final case analysis paper and, if applicable, the in-class presentation.

Framework for Case Analysis . College of Management. University of Massachusetts; Hawes, Jon M. "Teaching is Not Telling: The Case Method as a Form of Interactive Learning." Journal for Advancement of Marketing Education 5 (Winter 2004): 47-54; Rasche, Christoph and Achim Seisreiner. Guidelines for Business Case Analysis . University of Potsdam; Writing a Case Study Analysis . University of Arizona Global Campus Writing Center; Van Ness, Raymond K. A Guide to Case Analysis . School of Business. State University of New York, Albany; Writing a Case Analysis . Business School, University of New South Wales.

Structure and Writing Style

A case analysis paper should be detailed, concise, persuasive, clearly written, and professional in tone and in the use of language . As with other forms of college-level academic writing, declarative statements that convey information, provide a fact, or offer an explanation or any recommended courses of action should be based on evidence. If allowed by your professor, any external sources used to support your analysis, such as course readings, should be properly cited under a list of references. The organization and structure of case analysis papers can vary depending on your professor’s preferred format, but its structure generally follows the steps used for analyzing the case.

Introduction

The introduction should provide a succinct but thorough descriptive overview of the main facts, issues, and core problems of the case . The introduction should also include a brief summary of the most relevant details about the situation and organizational setting. This includes defining the theoretical framework or conceptual model on which any questions were used to frame your analysis.

Following the rules of most college-level research papers, the introduction should then inform the reader how the paper will be organized. This includes describing the major sections of the paper and the order in which they will be presented. Unless you are told to do so by your professor, you do not need to preview your final recommendations in the introduction. U nlike most college-level research papers , the introduction does not include a statement about the significance of your findings because a case analysis assignment does not involve contributing new knowledge about a research problem.

Background Analysis

Background analysis can vary depending on any guiding questions provided by your professor and the underlying concept or theory that the case is based upon. In general, however, this section of your paper should focus on:

• Providing an overarching analysis of problems identified from the case scenario, including identifying events that stakeholders find challenging or troublesome,
• Identifying assumptions made by each stakeholder and any apparent biases they may exhibit,
• Describing any demands or claims made by or forced upon key stakeholders, and
• Highlighting any issues of concern or complaints expressed by stakeholders in response to those demands or claims.

These aspects of the case are often in the form of behavioral responses expressed by individuals or groups within the organizational setting. However, note that problems in a case situation can also be reflected in data [or the lack thereof] and in the decision-making, operational, cultural, or institutional structure of the organization. Additionally, demands or claims can be either internal and external to the organization [e.g., a case analysis involving a president considering arms sales to Saudi Arabia could include managing internal demands from White House advisors as well as demands from members of Congress].

Throughout this section, present all relevant evidence from the case that supports your analysis. Do not simply claim there is a problem, an assumption, a demand, or a concern; tell the reader what part of the case informed how you identified these background elements.

Identification of Problems

In most case analysis assignments, there are problems, and then there are problems . Each problem can reflect a multitude of underlying symptoms that are detrimental to the interests of the organization. The purpose of identifying problems is to teach students how to differentiate between problems that vary in severity, impact, and relative importance. Given this, problems can be described in three general forms: those that must be addressed immediately, those that should be addressed but the impact is not severe, and those that do not require immediate attention and can be set aside for the time being.

All of the problems you identify from the case should be identified in this section of your paper, with a description based on evidence explaining the problem variances. If the assignment asks you to conduct research to further support your assessment of the problems, include this in your explanation. Remember to cite those sources in a list of references. Use specific evidence from the case and apply appropriate concepts, theories, and models discussed in class or in relevant course readings to highlight and explain the key problems [or problem] that you believe must be solved immediately and describe the underlying symptoms and why they are so critical.

Alternative Solutions

This section is where you provide specific, realistic, and evidence-based solutions to the problems you have identified and make recommendations about how to alleviate the underlying symptomatic conditions impacting the organizational setting. For each solution, you must explain why it was chosen and provide clear evidence to support your reasoning. This can include, for example, course readings and class discussions as well as research resources, such as, books, journal articles, research reports, or government documents. In some cases, your professor may encourage you to include personal, anecdotal experiences as evidence to support why you chose a particular solution or set of solutions. Using anecdotal evidence helps promote reflective thinking about the process of determining what qualifies as a core problem and relevant solution .

Throughout this part of the paper, keep in mind the entire array of problems that must be addressed and describe in detail the solutions that might be implemented to resolve these problems.

Recommended Courses of Action

In some case analysis assignments, your professor may ask you to combine the alternative solutions section with your recommended courses of action. However, it is important to know the difference between the two. A solution refers to the answer to a problem. A course of action refers to a procedure or deliberate sequence of activities adopted to proactively confront a situation, often in the context of accomplishing a goal. In this context, proposed courses of action are based on your analysis of alternative solutions. Your description and justification for pursuing each course of action should represent the overall plan for implementing your recommendations.

For each course of action, you need to explain the rationale for your recommendation in a way that confronts challenges, explains risks, and anticipates any counter-arguments from stakeholders. Do this by considering the strengths and weaknesses of each course of action framed in relation to how the action is expected to resolve the core problems presented, the possible ways the action may affect remaining problems, and how the recommended action will be perceived by each stakeholder.

In addition, you should describe the criteria needed to measure how well the implementation of these actions is working and explain which individuals or groups are responsible for ensuring your recommendations are successful. In addition, always consider the law of unintended consequences. Outline difficulties that may arise in implementing each course of action and describe how implementing the proposed courses of action [either individually or collectively] may lead to new problems [both large and small].

Throughout this section, you must consider the costs and benefits of recommending your courses of action in relation to uncertainties or missing information and the negative consequences of success.

The conclusion should be brief and introspective. Unlike a research paper, the conclusion in a case analysis paper does not include a summary of key findings and their significance, a statement about how the study contributed to existing knowledge, or indicate opportunities for future research.

Begin by synthesizing the core problems presented in the case and the relevance of your recommended solutions. This can include an explanation of what you have learned about the case in the context of your answers to the questions provided by your professor. The conclusion is also where you link what you learned from analyzing the case with the course readings or class discussions. This can further demonstrate your understanding of the relationships between the practical case situation and the theoretical and abstract content of assigned readings and other course content.

Problems to Avoid

The literature on case analysis assignments often includes examples of difficulties students have with applying methods of critical analysis and effectively reporting the results of their assessment of the situation. A common reason cited by scholars is that the application of this type of teaching and learning method is limited to applied fields of social and behavioral sciences and, as a result, writing a case analysis paper can be unfamiliar to most students entering college.

After you have drafted your paper, proofread the narrative flow and revise any of these common errors:

• Unnecessary detail in the background section . The background section should highlight the essential elements of the case based on your analysis. Focus on summarizing the facts and highlighting the key factors that become relevant in the other sections of the paper by eliminating any unnecessary information.
• Analysis relies too much on opinion . Your analysis is interpretive, but the narrative must be connected clearly to evidence from the case and any models and theories discussed in class or in course readings. Any positions or arguments you make should be supported by evidence.
• Analysis does not focus on the most important elements of the case . Your paper should provide a thorough overview of the case. However, the analysis should focus on providing evidence about what you identify are the key events, stakeholders, issues, and problems. Emphasize what you identify as the most critical aspects of the case to be developed throughout your analysis. Be thorough but succinct.
• Writing is too descriptive . A paper with too much descriptive information detracts from your analysis of the complexities of the case situation. Questions about what happened, where, when, and by whom should only be included as essential information leading to your examination of questions related to why, how, and for what purpose.
• Inadequate definition of a core problem and associated symptoms . A common error found in case analysis papers is recommending a solution or course of action without adequately defining or demonstrating that you understand the problem. Make sure you have clearly described the problem and its impact and scope within the organizational setting. Ensure that you have adequately described the root causes w hen describing the symptoms of the problem.
• Recommendations lack specificity . Identify any use of vague statements and indeterminate terminology, such as, “A particular experience” or “a large increase to the budget.” These statements cannot be measured and, as a result, there is no way to evaluate their successful implementation. Provide specific data and use direct language in describing recommended actions.
• Unrealistic, exaggerated, or unattainable recommendations . Review your recommendations to ensure that they are based on the situational facts of the case. Your recommended solutions and courses of action must be based on realistic assumptions and fit within the constraints of the situation. Also note that the case scenario has already happened, therefore, any speculation or arguments about what could have occurred if the circumstances were different should be revised or eliminated.

Bee, Lian Song et al. "Business Students' Perspectives on Case Method Coaching for Problem-Based Learning: Impacts on Student Engagement and Learning Performance in Higher Education." Education & Training 64 (2022): 416-432; The Case Analysis . Fred Meijer Center for Writing and Michigan Authors. Grand Valley State University; Georgallis, Panikos and Kayleigh Bruijn. "Sustainability Teaching using Case-Based Debates." Journal of International Education in Business 15 (2022): 147-163; Hawes, Jon M. "Teaching is Not Telling: The Case Method as a Form of Interactive Learning." Journal for Advancement of Marketing Education 5 (Winter 2004): 47-54; Georgallis, Panikos, and Kayleigh Bruijn. "Sustainability Teaching Using Case-based Debates." Journal of International Education in Business 15 (2022): 147-163; .Dean,  Kathy Lund and Charles J. Fornaciari. "How to Create and Use Experiential Case-Based Exercises in a Management Classroom." Journal of Management Education 26 (October 2002): 586-603; Klebba, Joanne M. and Janet G. Hamilton. "Structured Case Analysis: Developing Critical Thinking Skills in a Marketing Case Course." Journal of Marketing Education 29 (August 2007): 132-137, 139; Klein, Norman. "The Case Discussion Method Revisited: Some Questions about Student Skills." Exchange: The Organizational Behavior Teaching Journal 6 (November 1981): 30-32; Mukherjee, Arup. "Effective Use of In-Class Mini Case Analysis for Discovery Learning in an Undergraduate MIS Course." The Journal of Computer Information Systems 40 (Spring 2000): 15-23; Pessoa, Silviaet al. "Scaffolding the Case Analysis in an Organizational Behavior Course: Making Analytical Language Explicit." Journal of Management Education 46 (2022): 226-251: Ramsey, V. J. and L. D. Dodge. "Case Analysis: A Structured Approach." Exchange: The Organizational Behavior Teaching Journal 6 (November 1981): 27-29; Schweitzer, Karen. "How to Write and Format a Business Case Study." ThoughtCo. https://www.thoughtco.com/how-to-write-and-format-a-business-case-study-466324 (accessed December 5, 2022); Reddy, C. D. "Teaching Research Methodology: Everything's a Case." Electronic Journal of Business Research Methods 18 (December 2020): 178-188; Volpe, Guglielmo. "Case Teaching in Economics: History, Practice and Evidence." Cogent Economics and Finance 3 (December 2015). doi:https://doi.org/10.1080/23322039.2015.1120977.

Writing Tip

Ca se Study and Case Analysis Are Not the Same!

Confusion often exists between what it means to write a paper that uses a case study research design and writing a paper that analyzes a case; they are two different types of approaches to learning in the social and behavioral sciences. Professors as well as educational researchers contribute to this confusion because they often use the term "case study" when describing the subject of analysis for a case analysis paper. But you are not studying a case for the purpose of generating a comprehensive, multi-faceted understanding of a research problem. R ather, you are critically analyzing a specific scenario to argue logically for recommended solutions and courses of action that lead to optimal outcomes applicable to professional practice.

To avoid any confusion, here are twelve characteristics that delineate the differences between writing a paper using the case study research method and writing a case analysis paper:

• Case study is a method of in-depth research and rigorous inquiry ; case analysis is a reliable method of teaching and learning . A case study is a modality of research that investigates a phenomenon for the purpose of creating new knowledge, solving a problem, or testing a hypothesis using empirical evidence derived from the case being studied. Often, the results are used to generalize about a larger population or within a wider context. The writing adheres to the traditional standards of a scholarly research study. A case analysis is a pedagogical tool used to teach students how to reflect and think critically about a practical, real-life problem in an organizational setting.
• The researcher is responsible for identifying the case to study; a case analysis is assigned by your professor . As the researcher, you choose the case study to investigate in support of obtaining new knowledge and understanding about the research problem. The case in a case analysis assignment is almost always provided, and sometimes written, by your professor and either given to every student in class to analyze individually or to a small group of students, or students select a case to analyze from a predetermined list.
• A case study is indeterminate and boundless; a case analysis is predetermined and confined . A case study can be almost anything [see item 9 below] as long as it relates directly to examining the research problem. This relationship is the only limit to what a researcher can choose as the subject of their case study. The content of a case analysis is determined by your professor and its parameters are well-defined and limited to elucidating insights of practical value applied to practice.
• Case study is fact-based and describes actual events or situations; case analysis can be entirely fictional or adapted from an actual situation . The entire content of a case study must be grounded in reality to be a valid subject of investigation in an empirical research study. A case analysis only needs to set the stage for critically examining a situation in practice and, therefore, can be entirely fictional or adapted, all or in-part, from an actual situation.
• Research using a case study method must adhere to principles of intellectual honesty and academic integrity; a case analysis scenario can include misleading or false information . A case study paper must report research objectively and factually to ensure that any findings are understood to be logically correct and trustworthy. A case analysis scenario may include misleading or false information intended to deliberately distract from the central issues of the case. The purpose is to teach students how to sort through conflicting or useless information in order to come up with the preferred solution. Any use of misleading or false information in academic research is considered unethical.
• Case study is linked to a research problem; case analysis is linked to a practical situation or scenario . In the social sciences, the subject of an investigation is most often framed as a problem that must be researched in order to generate new knowledge leading to a solution. Case analysis narratives are grounded in real life scenarios for the purpose of examining the realities of decision-making behavior and processes within organizational settings. A case analysis assignments include a problem or set of problems to be analyzed. However, the goal is centered around the act of identifying and evaluating courses of action leading to best possible outcomes.
• The purpose of a case study is to create new knowledge through research; the purpose of a case analysis is to teach new understanding . Case studies are a choice of methodological design intended to create new knowledge about resolving a research problem. A case analysis is a mode of teaching and learning intended to create new understanding and an awareness of uncertainty applied to practice through acts of critical thinking and reflection.
• A case study seeks to identify the best possible solution to a research problem; case analysis can have an indeterminate set of solutions or outcomes . Your role in studying a case is to discover the most logical, evidence-based ways to address a research problem. A case analysis assignment rarely has a single correct answer because one of the goals is to force students to confront the real life dynamics of uncertainly, ambiguity, and missing or conflicting information within professional practice. Under these conditions, a perfect outcome or solution almost never exists.
• Case study is unbounded and relies on gathering external information; case analysis is a self-contained subject of analysis . The scope of a case study chosen as a method of research is bounded. However, the researcher is free to gather whatever information and data is necessary to investigate its relevance to understanding the research problem. For a case analysis assignment, your professor will often ask you to examine solutions or recommended courses of action based solely on facts and information from the case.
• Case study can be a person, place, object, issue, event, condition, or phenomenon; a case analysis is a carefully constructed synopsis of events, situations, and behaviors . The research problem dictates the type of case being studied and, therefore, the design can encompass almost anything tangible as long as it fulfills the objective of generating new knowledge and understanding. A case analysis is in the form of a narrative containing descriptions of facts, situations, processes, rules, and behaviors within a particular setting and under a specific set of circumstances.
• Case study can represent an open-ended subject of inquiry; a case analysis is a narrative about something that has happened in the past . A case study is not restricted by time and can encompass an event or issue with no temporal limit or end. For example, the current war in Ukraine can be used as a case study of how medical personnel help civilians during a large military conflict, even though circumstances around this event are still evolving. A case analysis can be used to elicit critical thinking about current or future situations in practice, but the case itself is a narrative about something finite and that has taken place in the past.
• Multiple case studies can be used in a research study; case analysis involves examining a single scenario . Case study research can use two or more cases to examine a problem, often for the purpose of conducting a comparative investigation intended to discover hidden relationships, document emerging trends, or determine variations among different examples. A case analysis assignment typically describes a stand-alone, self-contained situation and any comparisons among cases are conducted during in-class discussions and/or student presentations.

The Case Analysis . Fred Meijer Center for Writing and Michigan Authors. Grand Valley State University; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Ramsey, V. J. and L. D. Dodge. "Case Analysis: A Structured Approach." Exchange: The Organizational Behavior Teaching Journal 6 (November 1981): 27-29; Yin, Robert K. Case Study Research and Applications: Design and Methods . 6th edition. Thousand Oaks, CA: Sage, 2017; Crowe, Sarah et al. “The Case Study Approach.” BMC Medical Research Methodology 11 (2011):  doi: 10.1186/1471-2288-11-100; Yin, Robert K. Case Study Research: Design and Methods . 4th edition. Thousand Oaks, CA: Sage Publishing; 1994.

• << Previous: Reviewing Collected Works
• Next: Writing a Case Study >>
• Last Updated: May 7, 2024 9:45 AM
• URL: https://libguides.usc.edu/writingguide/assignments

How to Write a Case Study: Step-by-Step Guide with Examples

• October 7, 2022

Content Manager at SocialBee

Why is learning how to write a case study so important?

Well, because it provides your customers with social proof and supporting evidence of how effective your products and services are. Moreover, it eliminates the doubt that usually makes clients give up on their next purchase.

That is why today we are going to talk about the step-by-step process of writing a case study . We prepared five business case study examples guaranteed to inspire you throughout the process.

Let’s get started!

What Is a Case Study?

A case study is a piece of content that focuses on a case from your business history. It describes the problems your client faced and the solutions you used to help them succeed.

The goal of a writing case study is to promote your business , so your aim should be to put together a compelling story with evidence that backs up all your claims.

Case studies use real-life examples to show your clients the quality and effectiveness of your products and services. It’s a marketing tool that provides credibility and it helps your potential clients gain confidence in your brand.

Case studies can be structured in different formats:

• A written document
• An infographic
• A blog post
• A landing page

Case Study Benefits

A great case study makes your potential customers want to benefit from the products and services that helped your client overcome their challenges. 

Here are the benefits of writing a case study:

• It is an affordable marketing practice
• It decreases the perceived risk of your potential clients
• It provides transparency
• It builds trust and credibility among prospective customers
• It makes your potential clients relate to the problem
• It provides your potential clients with a solution for their problems

How to Write a Case Study

Now that you know what a case study is, let’s get into the real reason why you are here — learning how to write an in-depth study.

Here is the step-by-step process of writing a case study:

• Identify the topic of your case study
• Start collaborating with a client
• Prepare questions for the interview
• Conduct the case study interview
• Structure your case study 
• Make it visual

Step 1: Identify the Topic of Your Case Study

A case study starts with a strategy. Choosing what you want to write about should be closely related to your business needs. More specifically, what service or product do you want to promote through your case study?

Because case studies focus on client challenges, business solutions, and results, you have to carefully pick the case that your potential clients will relate to the most. 

To communicate the benefits of your business, you should focus on a customer story that appeals to a specific segment of your audience . Consequently, you will target clients that relate to your customer example while providing a solution for their needs and pain points — your products and services.

Start by focusing all your research methods on identifying your customers’ main pain points. Then find examples of how your products or services have helped them overcome their challenges and achieve their goals .

Furthermore, to make sure you choose the best case study topic for your buyer persona , you should have a meeting with your sales/customer service team. Because they are in close contact with your customers, they will be able to tell you:

• The main challenges your clients face 
• The services/products that bring them the best results 

These are the main two pieces of information you want your case study to focus on.

Step 2: Start Collaborating with a Client

With a clear topic in mind, you have to find the best fit for your case study. 

However, that is not all. First, you must obtain the client’s permission. After all, your business story is theirs too.

So, craft an email to provide your client with an overview of the case study. This will help them make a decision. 

Your message should include:

• The case study format (video, written, etc.) and where it will be published (blog, landing page , etc.)
• The topic of the document
• The timeline of the process
• The information that will be included
• The benefits they get as a result of this collaboration (brand exposure, backlinks)

Additionally, you can offer to schedule a call or a meeting to answer all their questions and curiosities and provide a means for clear and open communication.

Once you receive a positive response from your client, you can continue with the next step of the process: the actual interview.

PRO TIP: A great way to ensure a smooth and safe collaboration between you and your client is to sign a legal release form before writing the case study. This will allow you to use their information and protect you from issues that may occur in the future. Moreover, if the client is not comfortable with revealing their identity, you can always offer them anonymity.

Step 3: Prepare Questions for the Interview

Now that you have the subject for your case study, it’s time to write and organize your interview in several sets of questions.

Don’t forget that the whole structure of your case study is based on the information you get from your customer interview.

So pay attention to the way you phrase the questions. After all, your goal is to gather all the data you need to avoid creating a back-and-forth process that will consume your client’s time and energy.

To help you create the best questionnaire, we created a set of case study questions and organized them into different categories. 

Here are the five main sections your case study interview should contain:

• The client’s background information
• The problem
• The start of the collaboration
• The solution
• The results

A. The Client’s Background Information

This part of the case study interview must give a comprehensive look into your customer’s business and allow your readers to get to know them better.

Here are some question ideas:

B. The Problem

Now it’s time to get into the reason your client came to you for assistance, the initial challenge that triggered your collaboration.

In this part of the interview process, you want to find out what made them ask for help and what was their situation before working with you.

You can ask your client the following case study questions:

C. The Start of the Collaboration

This part of the case study interview will focus on the process that made your collaboration possible. More specifically, how did your client research possible collaboration opportunities, and why they chose your business? 

This information will not only be informative for your future customers but will also give you a behind-the-scenes look into their decision-making process.

D. The Solution

It’s time to get into one of the most significant parts of the case study interview — the solution. Here you should discuss how your services have helped their business recover from the problems mentioned before.

Make sure you ask the right questions so you can really paint the picture of a satisfied customer.

Have a look at these question examples:

E. The Results

The best proof you can give to your customers is through your results. And this is the perfect opportunity to let your actions speak for themselves.

Unlike the other marketing strategies you use to promote your business, the content is provided by your customer, not by your team. As a result, you end up with a project that is on another level of reliability.

Here is how you can ask your client about their results:

Step 4: Conduct the Case Study Interview

Now that you have a great set of case study questions, it’s time to put them to good use.

Decide on the type of interview you want to conduct: face-to-face, video call , or phone call. Then, consult with your client and set up a date and a time when you are both available. 

It should be noted that during the interview it’s best to use a recording device for accuracy. Maybe you don’t have time to write down all the information, and you forget important details. Or maybe you want to be focused more on the conversational aspect of the interview, and you don’t want to write anything down while it’s happening.

Step 5: Structure Your Case Study 

The hard part is over. Now it’s time to organize all the information you gathered in an appealing format. Let’s have a look at what your case study should contain.

Here are the components of a case study:

• Engaging title
• Executive summary
• Client description 
• Introduction to the problem
• The problem-solving process
• Progress and results

A. Engaging Title

Putting that much work into a project, it would be a shame not to do your best to attract more readers. So, take into consideration that you only have a few seconds to catch your audience’s attention. 

You can also use a headline analyzer to evaluate the performance of your title.

The best case study titles contain:

• Relevant keywords
• Customer pain points
• Clear result

Case study example :

B. Executive Summary

Your executive summary should include a thesis statement that sums up the main points of your case study. Therefore, it must be clear and concise. Moreover, to make your audience curious, you can add a statistic or a relevant piece of data that they might be interested in.

Here is what you should include in your executive summary:

• The business you are writing about (only if the clients wants to make themselves known)
• Relevant statistics

C. Client Description 

Here is where you start to include the information you gained from your interview. Provide your readers with a clear picture of your client and create a context for your case study.

Take your client’s answers from the “Client Background” section of the interview and present them in a more appealing format.

D. Introduction to the Problem

In this section, use your client’s interview answers to write about the problem they were experiencing before working with you.

Remember to be specific because you want your audience to fully understand the situation and relate to it. At the end of the day, the goal of the case study is to show your potential customers why they should buy your services/products.

E. The Problem-Solving Process

Next, explain how your service/product helped your client overcome their problems. Moreover, let your readers know how and why your service/product worked in their case.

In this part of the case study, you should summarize: 

• The strategy used to solve the problem of your customer 
• The process of implementing the solution 

F. Progress and Results

Tell your readers about what you and your client have achieved during your collaboration. Here you can include:

• Graphics about your progress
• Business objectives they have achieved
• Relevant metrics 

Step 6: Make It Visual

To elevate the information you have written for your audience, you must make sure it’s appealing and easy to read. And a great way to achieve that is to use visuals that add value to your case study.

Here are some design elements that will make emphasize your text:

• Graphic symbols that guide the eye (arrows, bullet points, checkmarks, etc.)
• Charts, graphics, tables 
• Relevant screenshots from business reports
• The colors and fonts of your brand
• Your client’s logo

Platforms like Canva can really come in handy while designing your case study. It’s easy to use and it has multiple free slide templates and graphics that save you time and money.

PRO TIP: Share Your Case Study Across All Marketing Channels

A case study is a perfect example of evergreen content that can be reshared endlessly on your social media channels .

Aside from helping you maintain a consistent posting schedule with ease, case study-related posts will increase your credibility and push leads toward the bottom of your marketing funnel . Other examples of social proof evergreen content are reviews, testimonials, and positive social media mentions.

To keep track of all your evergreen posts and have them scheduled on a continuous loop, use a social media tool like SocialBee.

Create evergreen content categories where all your posts get reposted regularly on your social media channels. 

Start your 14-day trial today and start using SocialBee for free!

Aside from promoting your case study on social media, you can also feature it in your newsletter that you can create using email newsletter software , include it as a pop-up on your website, and even create a separate landing page dedicated to your customer study.

Share Your Case Study on Social Media with SocialBee!

Get to writing your own case study.

What do you think? Is writing a case study easier than you thought? We sure hope so.

Learning how to write a case study is a simple process once you understand the logical steps that go into it. So make sure you go over the guide a couple of times before you start documenting your customer success stories.

And remember that the goal of your case study is to attract more leads . Therefore you need to include tangible results and valuable details that will compel your audience to invest in your products and services.

Article written by

Content writer at SocialBee

Related articles

Fix Your Social Media Posting Schedule

Is your social media posting schedule not delivering the results you’d hoped for? Because let’s face it: when it comes

The 2024 Guide to Affiliate Marketing vs Influencer Marketing

Affiliate marketing vs influencer marketing: Which one’s better? Which of the two can help your business grow quicker? If you’re

Level up your social media game with exclusive resources delivered straight to your inbox

Proudly supporting

Out of post ideas? Get our social media calendar

Access 500+ content ideas, post examples, and Canva templates.

Use SocialBee’s Free AI Post Generator to create content for your social media profiles.

• Customizable tone of voice
• Several content variations to choose from
• 1000+ pre-made AI prompts

We use essential cookies to make Venngage work. By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Manage Cookies

Cookies and similar technologies collect certain information about how you’re using our website. Some of them are essential, and without them you wouldn’t be able to use Venngage. But others are optional, and you get to choose whether we use them or not.

Strictly Necessary Cookies

These cookies are always on, as they’re essential for making Venngage work, and making it safe. Without these cookies, services you’ve asked for can’t be provided.

Show cookie providers

• Google Login

Functionality Cookies

These cookies help us provide enhanced functionality and personalisation, and remember your settings. They may be set by us or by third party providers.

Performance Cookies

These cookies help us analyze how many people are using Venngage, where they come from and how they're using it. If you opt out of these cookies, we can’t get feedback to make Venngage better for you and all our users.

• Google Analytics

Targeting Cookies

These cookies are set by our advertising partners to track your activity and show you relevant Venngage ads on other sites as you browse the internet.

• Google Tag Manager
• Infographics
• Daily Infographics
• Popular Templates
• Accessibility
• Graphic Design
• Graphs and Charts
• Data Visualization
• Human Resources
• Beginner Guides

Blog Business How to Present a Case Study like a Pro (With Examples)

How to Present a Case Study like a Pro (With Examples)

Written by: Danesh Ramuthi Sep 07, 2023

Okay, let’s get real: case studies can be kinda snooze-worthy. But guess what? They don’t have to be!

In this article, I will cover every element that transforms a mere report into a compelling case study, from selecting the right metrics to using persuasive narrative techniques.

And if you’re feeling a little lost, don’t worry! There are cool tools like Venngage’s Case Study Creator to help you whip up something awesome, even if you’re short on time. Plus, the pre-designed case study templates are like instant polish because let’s be honest, everyone loves a shortcut.

Click to jump ahead: 

What is a case study presentation?

What is the purpose of presenting a case study, how to structure a case study presentation, how long should a case study presentation be, 5 case study presentation examples with templates, 6 tips for delivering an effective case study presentation, 5 common mistakes to avoid in a case study presentation, how to present a case study faqs.

A case study presentation involves a comprehensive examination of a specific subject, which could range from an individual, group, location, event, organization or phenomenon.

They’re like puzzles you get to solve with the audience, all while making you think outside the box.

Unlike a basic report or whitepaper, the purpose of a case study presentation is to stimulate critical thinking among the viewers. 

The primary objective of a case study is to provide an extensive and profound comprehension of the chosen topic. You don’t just throw numbers at your audience. You use examples and real-life cases to make you think and see things from different angles.

The primary purpose of presenting a case study is to offer a comprehensive, evidence-based argument that informs, persuades and engages your audience.

Here’s the juicy part: presenting that case study can be your secret weapon. Whether you’re pitching a groundbreaking idea to a room full of suits or trying to impress your professor with your A-game, a well-crafted case study can be the magic dust that sprinkles brilliance over your words.

Think of it like digging into a puzzle you can’t quite crack . A case study lets you explore every piece, turn it over and see how it fits together. This close-up look helps you understand the whole picture, not just a blurry snapshot.

It’s also your chance to showcase how you analyze things, step by step, until you reach a conclusion. It’s all about being open and honest about how you got there.

Besides, presenting a case study gives you an opportunity to connect data and real-world scenarios in a compelling narrative. It helps to make your argument more relatable and accessible, increasing its impact on your audience.

One of the contexts where case studies can be very helpful is during the job interview. In some job interviews, you as candidates may be asked to present a case study as part of the selection process.

Having a case study presentation prepared allows the candidate to demonstrate their ability to understand complex issues, formulate strategies and communicate their ideas effectively.

The way you present a case study can make all the difference in how it’s received. A well-structured presentation not only holds the attention of your audience but also ensures that your key points are communicated clearly and effectively.

In this section, let’s go through the key steps that’ll help you structure your case study presentation for maximum impact.

Let’s get into it. 

Open with an introductory overview 

Start by introducing the subject of your case study and its relevance. Explain why this case study is important and who would benefit from the insights gained. This is your opportunity to grab your audience’s attention.

Explain the problem in question

Dive into the problem or challenge that the case study focuses on. Provide enough background information for the audience to understand the issue. If possible, quantify the problem using data or metrics to show the magnitude or severity.

Detail the solutions to solve the problem

After outlining the problem, describe the steps taken to find a solution. This could include the methodology, any experiments or tests performed and the options that were considered. Make sure to elaborate on why the final solution was chosen over the others.

Key stakeholders Involved

Talk about the individuals, groups or organizations that were directly impacted by or involved in the problem and its solution. 

Stakeholders may experience a range of outcomes—some may benefit, while others could face setbacks.

For example, in a business transformation case study, employees could face job relocations or changes in work culture, while shareholders might be looking at potential gains or losses.

Discuss the key results & outcomes

Discuss the results of implementing the solution. Use data and metrics to back up your statements. Did the solution meet its objectives? What impact did it have on the stakeholders? Be honest about any setbacks or areas for improvement as well.

Include visuals to support your analysis

Visual aids can be incredibly effective in helping your audience grasp complex issues. Utilize charts, graphs, images or video clips to supplement your points. Make sure to explain each visual and how it contributes to your overall argument.

Pie charts illustrate the proportion of different components within a whole, useful for visualizing market share, budget allocation or user demographics.

This is particularly useful especially if you’re displaying survey results in your case study presentation.

Stacked charts on the other hand are perfect for visualizing composition and trends. This is great for analyzing things like customer demographics, product breakdowns or budget allocation in your case study.

Consider this example of a stacked bar chart template. It provides a straightforward summary of the top-selling cake flavors across various locations, offering a quick and comprehensive view of the data.

Not the chart you’re looking for? Browse Venngage’s gallery of chart templates to find the perfect one that’ll captivate your audience and level up your data storytelling.

Recommendations and next steps

Wrap up by providing recommendations based on the case study findings. Outline the next steps that stakeholders should take to either expand on the success of the project or address any remaining challenges.

Acknowledgments and references

Thank the people who contributed to the case study and helped in the problem-solving process. Cite any external resources, reports or data sets that contributed to your analysis.

Feedback & Q&A session

Open the floor for questions and feedback from your audience. This allows for further discussion and can provide additional insights that may not have been considered previously.

Closing remarks

Conclude the presentation by summarizing the key points and emphasizing the takeaways. Thank your audience for their time and participation and express your willingness to engage in further discussions or collaborations on the subject.

Well, the length of a case study presentation can vary depending on the complexity of the topic and the needs of your audience. However, a typical business or academic presentation often lasts between 15 to 30 minutes. 

This time frame usually allows for a thorough explanation of the case while maintaining audience engagement. However, always consider leaving a few minutes at the end for a Q&A session to address any questions or clarify points made during the presentation.

When it comes to presenting a compelling case study, having a well-structured template can be a game-changer. 

It helps you organize your thoughts, data and findings in a coherent and visually pleasing manner. 

Not all case studies are created equal and different scenarios require distinct approaches for maximum impact. 

To save you time and effort, I have curated a list of 5 versatile case study presentation templates, each designed for specific needs and audiences. 

Here are some best case study presentation examples that showcase effective strategies for engaging your audience and conveying complex information clearly.

1 . Lab report case study template

Ever feel like your research gets lost in a world of endless numbers and jargon? Lab case studies are your way out!

Think of it as building a bridge between your cool experiment and everyone else. It’s more than just reporting results – it’s explaining the “why” and “how” in a way that grabs attention and makes sense.

This lap report template acts as a blueprint for your report, guiding you through each essential section (introduction, methods, results, etc.) in a logical order.

Want to present your research like a pro? Browse our research presentation template gallery for creative inspiration!

2. Product case study template

It’s time you ditch those boring slideshows and bullet points because I’ve got a better way to win over clients: product case study templates.

Instead of just listing features and benefits, you get to create a clear and concise story that shows potential clients exactly what your product can do for them. It’s like painting a picture they can easily visualize, helping them understand the value your product brings to the table.

Grab the template below, fill in the details, and watch as your product’s impact comes to life!

3. Content marketing case study template

In digital marketing, showcasing your accomplishments is as vital as achieving them. 

A well-crafted case study not only acts as a testament to your successes but can also serve as an instructional tool for others. 

With this coral content marketing case study template—a perfect blend of vibrant design and structured documentation, you can narrate your marketing triumphs effectively.

4. Case study psychology template

Understanding how people tick is one of psychology’s biggest quests and case studies are like magnifying glasses for the mind. They offer in-depth looks at real-life behaviors, emotions and thought processes, revealing fascinating insights into what makes us human.

Writing a top-notch case study, though, can be a challenge. It requires careful organization, clear presentation and meticulous attention to detail. That’s where a good case study psychology template comes in handy.

Think of it as a helpful guide, taking care of formatting and structure while you focus on the juicy content. No more wrestling with layouts or margins – just pour your research magic into crafting a compelling narrative.

5. Lead generation case study template

Lead generation can be a real head-scratcher. But here’s a little help: a lead generation case study.

Think of it like a friendly handshake and a confident resume all rolled into one. It’s your chance to showcase your expertise, share real-world successes and offer valuable insights. Potential clients get to see your track record, understand your approach and decide if you’re the right fit.

No need to start from scratch, though. This lead generation case study template guides you step-by-step through crafting a clear, compelling narrative that highlights your wins and offers actionable tips for others. Fill in the gaps with your specific data and strategies, and voilà! You’ve got a powerful tool to attract new customers.

Related: 15+ Professional Case Study Examples [Design Tips + Templates]

So, you’ve spent hours crafting the perfect case study and are now tasked with presenting it. Crafting the case study is only half the battle; delivering it effectively is equally important. 

Whether you’re facing a room of executives, academics or potential clients, how you present your findings can make a significant difference in how your work is received. 

Forget boring reports and snooze-inducing presentations! Let’s make your case study sing. Here are some key pointers to turn information into an engaging and persuasive performance:

• Know your audience : Tailor your presentation to the knowledge level and interests of your audience. Remember to use language and examples that resonate with them.
• Rehearse : Rehearsing your case study presentation is the key to a smooth delivery and for ensuring that you stay within the allotted time. Practice helps you fine-tune your pacing, hone your speaking skills with good word pronunciations and become comfortable with the material, leading to a more confident, conversational and effective presentation.
• Start strong : Open with a compelling introduction that grabs your audience’s attention. You might want to use an interesting statistic, a provocative question or a brief story that sets the stage for your case study.
• Be clear and concise : Avoid jargon and overly complex sentences. Get to the point quickly and stay focused on your objectives.
• Use visual aids : Incorporate slides with graphics, charts or videos to supplement your verbal presentation. Make sure they are easy to read and understand.
• Tell a story : Use storytelling techniques to make the case study more engaging. A well-told narrative can help you make complex data more relatable and easier to digest.

Ditching the dry reports and slide decks? Venngage’s case study templates let you wow customers with your solutions and gain insights to improve your business plan. Pre-built templates, visual magic and customer captivation – all just a click away. Go tell your story and watch them say “wow!”

Nailed your case study, but want to make your presentation even stronger? Avoid these common mistakes to ensure your audience gets the most out of it:

Overloading with information

A case study is not an encyclopedia. Overloading your presentation with excessive data, text or jargon can make it cumbersome and difficult for the audience to digest the key points. Stick to what’s essential and impactful. Need help making your data clear and impactful? Our data presentation templates can help! Find clear and engaging visuals to showcase your findings.

Lack of structure

Jumping haphazardly between points or topics can confuse your audience. A well-structured presentation, with a logical flow from introduction to conclusion, is crucial for effective communication.

Ignoring the audience

Different audiences have different needs and levels of understanding. Failing to adapt your presentation to your audience can result in a disconnect and a less impactful presentation.

Poor visual elements

While content is king, poor design or lack of visual elements can make your case study dull or hard to follow. Make sure you use high-quality images, graphs and other visual aids to support your narrative.

Not focusing on results

A case study aims to showcase a problem and its solution, but what most people care about are the results. Failing to highlight or adequately explain the outcomes can make your presentation fall flat.

How to start a case study presentation?

Starting a case study presentation effectively involves a few key steps:

• Grab attention : Open with a hook—an intriguing statistic, a provocative question or a compelling visual—to engage your audience from the get-go.
• Set the stage : Briefly introduce the subject, context and relevance of the case study to give your audience an idea of what to expect.
• Outline objectives : Clearly state what the case study aims to achieve. Are you solving a problem, proving a point or showcasing a success?
• Agenda : Give a quick outline of the key sections or topics you’ll cover to help the audience follow along.
• Set expectations : Let your audience know what you want them to take away from the presentation, whether it’s knowledge, inspiration or a call to action.

How to present a case study on PowerPoint and on Google Slides?

Presenting a case study on PowerPoint and Google Slides involves a structured approach for clarity and impact using presentation slides :

• Title slide : Start with a title slide that includes the name of the case study, your name and any relevant institutional affiliations.
• Introduction : Follow with a slide that outlines the problem or situation your case study addresses. Include a hook to engage the audience.
• Objectives : Clearly state the goals of the case study in a dedicated slide.
• Findings : Use charts, graphs and bullet points to present your findings succinctly.
• Analysis : Discuss what the findings mean, drawing on supporting data or secondary research as necessary.
• Conclusion : Summarize key takeaways and results.
• Q&A : End with a slide inviting questions from the audience.

What’s the role of analysis in a case study presentation?

The role of analysis in a case study presentation is to interpret the data and findings, providing context and meaning to them. 

It helps your audience understand the implications of the case study, connects the dots between the problem and the solution and may offer recommendations for future action.

Is it important to include real data and results in the presentation?

Yes, including real data and results in a case study presentation is crucial to show experience,  credibility and impact. Authentic data lends weight to your findings and conclusions, enabling the audience to trust your analysis and take your recommendations more seriously

How do I conclude a case study presentation effectively?

To conclude a case study presentation effectively, summarize the key findings, insights and recommendations in a clear and concise manner. 

End with a strong call-to-action or a thought-provoking question to leave a lasting impression on your audience.

What’s the best way to showcase data in a case study presentation ?

The best way to showcase data in a case study presentation is through visual aids like charts, graphs and infographics which make complex information easily digestible, engaging and creative. 

Don’t just report results, visualize them! This template for example lets you transform your social media case study into a captivating infographic that sparks conversation.

Choose the type of visual that best represents the data you’re showing; for example, use bar charts for comparisons or pie charts for parts of a whole. 

Ensure that the visuals are high-quality and clearly labeled, so the audience can quickly grasp the key points. 

Keep the design consistent and simple, avoiding clutter or overly complex visuals that could distract from the message.

Choose a template that perfectly suits your case study where you can utilize different visual aids for maximum impact. 

Need more inspiration on how to turn numbers into impact with the help of infographics? Our ready-to-use infographic templates take the guesswork out of creating visual impact for your case studies with just a few clicks.

Related: 10+ Case Study Infographic Templates That Convert

Congrats on mastering the art of compelling case study presentations! This guide has equipped you with all the essentials, from structure and nuances to avoiding common pitfalls. You’re ready to impress any audience, whether in the boardroom, the classroom or beyond.

And remember, you’re not alone in this journey. Venngage’s Case Study Creator is your trusty companion, ready to elevate your presentations from ordinary to extraordinary. So, let your confidence shine, leverage your newly acquired skills and prepare to deliver presentations that truly resonate.

Go forth and make a lasting impact!

Discover popular designs

Infographic maker

Brochure maker

White paper online

Newsletter creator

Flyer maker

Timeline maker

Letterhead maker

Mind map maker

Ebook maker

Writing A Case Study

A Complete Case Study Writing Guide With Examples

People also read

Simple Case Study Format for Students to Follow

Understand the Types of Case Study Here

Brilliant Case Study Examples and Templates For Your Help

Many writers find themselves grappling with the challenge of crafting persuasive and engaging case studies. 

The process can be overwhelming, leaving them unsure where to begin or how to structure their study effectively. And, without a clear plan, it's tough to show the value and impact in a convincing way.

But don’t worry!

In this blog, we'll guide you through a systematic process, offering step-by-step instructions on crafting a compelling case study. 

Along the way, we'll share valuable tips and illustrative examples to enhance your understanding. So, let’s get started.

• 1. What is a Case Study? 
• 2. Types of Case Studies
• 3. How To Write a Case Study - 9 Steps
• 4. Case Study Methods
• 5. Case Study Format
• 6. Case Study Examples
• 7. Benefits and Limitations of Case Studies

What is a Case Study? 

A case study is a detailed analysis and examination of a particular subject, situation, or phenomenon. It involves comprehensive research to gain a deep understanding of the context and variables involved. 

Typically used in academic, business, and marketing settings, case studies aim to explore real-life scenarios, providing insights into challenges, solutions, and outcomes. They serve as valuable tools for learning, decision-making, and showcasing success stories.

Tough Essay Due? Hire Tough Writers!

Types of Case Studies

Case studies come in various forms, each tailored to address specific objectives and areas of interest. Here are some of the main types of case studies :

• Illustrative Case Studies: These focus on describing a particular situation or event, providing a detailed account to enhance understanding.
• Exploratory Case Studies: Aimed at investigating an issue and generating initial insights, these studies are particularly useful when exploring new or complex topics.
• Explanatory Case Studies: These delve into the cause-and-effect relationships within a given scenario, aiming to explain why certain outcomes occurred.
• Intrinsic Case Studies: Concentrating on a specific case that holds intrinsic value, these studies explore the unique qualities of the subject itself.
• Instrumental Case Studies: These are conducted to understand a broader issue and use the specific case as a means to gain insights into the larger context.
• Collective Case Studies: Involving the study of multiple cases, this type allows for comparisons and contrasts, offering a more comprehensive view of a phenomenon or problem.

How To Write a Case Study - 9 Steps

Crafting an effective case study involves a structured approach to ensure clarity, engagement, and relevance. 

Here's a step-by-step guide on how to write a compelling case study:

Step 1: Define Your Objective

Before diving into the writing process, clearly define the purpose of your case study. Identify the key questions you want to answer and the specific goals you aim to achieve. 

Whether it's to showcase a successful project, analyze a problem, or demonstrate the effectiveness of a solution, a well-defined objective sets the foundation for a focused and impactful case study.

Step 2: Conduct Thorough Research

Gather all relevant information and data related to your chosen case. This may include interviews, surveys, documentation, and statistical data. 

Ensure that your research is comprehensive, covering all aspects of the case to provide a well-rounded and accurate portrayal. 

The more thorough your research, the stronger your case study's foundation will be.

Step 3: Introduction: Set the Stage

Begin your case study with a compelling introduction that grabs the reader's attention. Clearly state the subject and the primary issue or challenge faced. 

Engage your audience by setting the stage for the narrative, creating intrigue, and highlighting the significance of the case.

Step 4: Present the Background Information

Provide context by presenting the background information of the case. Explore relevant history, industry trends, and any other factors that contribute to a deeper understanding of the situation. 

This section sets the stage for readers, allowing them to comprehend the broader context before delving into the specifics of the case.

Step 5: Outline the Challenges Faced

Identify and articulate the challenges or problems encountered in the case. Clearly define the obstacles that needed to be overcome, emphasizing their significance. 

This section sets the stakes for your audience and prepares them for the subsequent exploration of solutions.

Step 6: Detail the Solutions Implemented

Describe the strategies, actions, or solutions applied to address the challenges outlined. Be specific about the decision-making process, the rationale behind the chosen solutions, and any alternatives considered. 

This part of the case study demonstrates problem-solving skills and showcases the effectiveness of the implemented measures.

Paper Due? Why Suffer? That's our Job!

Step 7: Showcase Measurable Results

Present tangible outcomes and results achieved as a direct consequence of the implemented solutions. Use data, metrics, and success stories to quantify the impact. 

Whether it's increased revenue, improved efficiency, or positive customer feedback, measurable results add credibility and validation to your case study.

Step 8: Include Engaging Visuals

Enhance the readability and visual appeal of your case study by incorporating relevant visuals such as charts, graphs, images, and infographics. 

Visual elements not only break up the text but also provide a clearer representation of data and key points, making your case study more engaging and accessible.

Step 9: Provide a Compelling Conclusion

Wrap up your case study with a strong and conclusive summary. Revisit the initial objectives, recap key findings, and emphasize the overall success or significance of the case. 

This section should leave a lasting impression on your readers, reinforcing the value of the presented information.

Case Study Methods

The methods employed in case study writing are diverse and flexible, catering to the unique characteristics of each case. Here are common methods used in case study writing:

Conducting one-on-one or group interviews with individuals involved in the case to gather firsthand information, perspectives, and insights.

• Observation

Directly observing the subject or situation to collect data on behaviors, interactions, and contextual details.

• Document Analysis

Examining existing documents, records, reports, and other written materials relevant to the case to gather information and insights.

• Surveys and Questionnaires

Distributing structured surveys or questionnaires to relevant stakeholders to collect quantitative data on specific aspects of the case.

• Participant Observation

Combining direct observation with active participation in the activities or events related to the case to gain an insider's perspective.

• Triangulation

Using multiple methods (e.g., interviews, observation, and document analysis) to cross-verify and validate the findings, enhancing the study's reliability.

• Ethnography

Immersing the researcher in the subject's environment over an extended period, focusing on understanding the cultural context and social dynamics.

Case Study Format

Effectively presenting your case study is as crucial as the content itself. Follow these formatting guidelines to ensure clarity and engagement:

• Opt for fonts that are easy to read, such as Arial, Calibri, or Times New Roman.
• Maintain a consistent font size, typically 12 points for the body text.
• Aim for double-line spacing to maintain clarity and prevent overwhelming the reader with too much text.
• Utilize bullet points to present information in a concise and easily scannable format.
• Use numbered lists when presenting a sequence of steps or a chronological order of events.
• Bold or italicize key phrases or important terms to draw attention to critical points.
• Use underline sparingly, as it can sometimes be distracting in digital formats.
• Choose the left alignment style.
• Use hierarchy to distinguish between different levels of headings, making it easy for readers to navigate.

If you're still having trouble organizing your case study, check out this blog on case study format for helpful insights.

Case Study Examples

If you want to understand how to write a case study, examples are a fantastic way to learn. That's why we've gathered a collection of intriguing case study examples for you to review before you begin writing.

Case Study Research Example

Case Study Template

Case Study Introduction Example

Amazon Case Study Example

Business Case Study Example

APA Format Case Study Example

Psychology Case Study Example

Medical Case Study Example

UX Case Study Example

Looking for more examples? Check out our blog on case study examples for your inspiration!

Benefits and Limitations of Case Studies

Case studies are a versatile and in-depth research method, providing a nuanced understanding of complex phenomena. 

However, like any research approach, case studies come with their set of benefits and limitations. Some of them are given below:

Tips for Writing an Effective Case Study

Here are some important tips for writing a good case study:

• Clearly articulate specific, measurable research questions aligned with your objectives.
• Identify whether your case study is exploratory, explanatory, intrinsic, or instrumental.
• Choose a case that aligns with your research questions, whether it involves an individual case or a group of people through multiple case studies.
• Explore the option of conducting multiple case studies to enhance the breadth and depth of your findings.
• Present a structured format with clear sections, ensuring readability and alignment with the type of research.
• Clearly define the significance of the problem or challenge addressed in your case study, tying it back to your research questions.
• Collect and include quantitative and qualitative data to support your analysis and address the identified research questions.
• Provide sufficient detail without overwhelming your audience, ensuring a comprehensive yet concise presentation.
• Emphasize how your findings can be practically applied to real-world situations, linking back to your research objectives.
• Acknowledge and transparently address any limitations in your study, ensuring a comprehensive and unbiased approach.

To sum it up, creating a good case study involves careful thinking to share valuable insights and keep your audience interested. 

Stick to basics like having clear questions and understanding your research type. Choose the right case and keep things organized and balanced.

Remember, your case study should tackle a problem, use relevant data, and show how it can be applied in real life. Be honest about any limitations, and finish with a clear call-to-action to encourage further exploration.

However, if you are having issues understanding how to write a case study, it is best to hire MyPerfectWords.com 's Professional service.  Hiring our custom essay service will ensure that you will get the best grades on your essay without any stress of a deadline. 

So be sure to check out case study writing service online and stay up to the mark with your grades. 

Frequently Asked Questions

What is the purpose of a case study.

The objective of a case study is to do intensive research on a specific matter, such as individuals or communities. It's often used for academic purposes where you want the reader to know all factors involved in your subject while also understanding the processes at play.

What are the sources of a case study?

Some common sources of a case study include:

• Archival records
• Direct observations and encounters
• Participant observation
• Facts and statistics
• Physical artifacts

What is the sample size of a case study?

A normally acceptable size of a case study is 30-50. However, the final number depends on the scope of your study and the on-ground demographic realities.

Write Essay Within 60 Seconds!

Dr. Barbara is a highly experienced writer and author who holds a Ph.D. degree in public health from an Ivy League school. She has worked in the medical field for many years, conducting extensive research on various health topics. Her writing has been featured in several top-tier publications.

Paper Due? Why Suffer? That’s our Job!

Keep reading

Organizing Your Social Sciences Research Paper: Writing a Case Study

• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Choosing a Title
• Making an Outline
• Paragraph Development
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Reading Research Effectively
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• What Is Scholarly vs. Popular?
• Qualitative Methods
• Quantitative Methods
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Annotated Bibliography
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Multiple Book Review Essay
• Reviewing Collected Essays
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Research Proposal
• Bibliography

The term case study refers to both a method of analysis and a specific research design for examining a problem, both of which are used in most circumstances to generalize across populations. This tab focuses on the latter--how to design and organize a research paper in the social sciences that analyzes a specific case.

A case study research paper examines a person, place, event, phenomenon, or other type of subject of analysis in order to extrapolate  key themes and results that help predict future trends, illuminate previously hidden issues that can be applied to practice, and/or provide a means for understanding an important research problem with greater clarity. A case study paper usually examines a single subject of analysis, but case study papers can also be designed as a comparative investigation that shows relationships between two or among more than two subjects. The methods used to study a case can rest within a quantitative, qualitative, or mixed-method investigative paradigm.

Case Studies . Writing@CSU. Colorado State University; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010 ; “What is a Case Study?” In Swanborn, Peter G. Case Study Research: What, Why and How? London: SAGE, 2010.

How to Approach Writing a Case Study Research Paper

General information about how to choose a topic to investigate can be found under the " Choosing a Research Problem " tab in this writing guide. Review this page because it may help you identify a subject of analysis that can be investigated using a single case study design.

However, identifying a case to investigate involves more than choosing the research problem . A case study encompasses a problem contextualized around the application of in-depth analysis, interpretation, and discussion, often resulting in specific recommendations for action or for improving existing conditions. As Seawright and Gerring note, practical considerations such as time and access to information can influence case selection, but these issues should not be the sole factors used in describing the methodological justification for identifying a particular case to study. Given this, selecting a case includes considering the following:

• Does the case represent an unusual or atypical example of a research problem that requires more in-depth analysis? Cases often represent a topic that rests on the fringes of prior investigations because the case may provide new ways of understanding the research problem. For example, if the research problem is to identify strategies to improve policies that support girl's access to secondary education in predominantly Muslim nations, you could consider using Azerbaijan as a case study rather than selecting a more obvious nation in the Middle East. Doing so may reveal important new insights into recommending how governments in other predominantly Muslim nations can formulate policies that support improved access to education for girls.
• Does the case provide important insight or illuminate a previously hidden problem? In-depth analysis of a case can be based on the hypothesis that the case study will reveal trends or issues that have not been exposed in prior research or will reveal new and important implications for practice. For example, anecdotal evidence may suggest drug use among homeless veterans is related to their patterns of travel throughout the day. Assuming prior studies have not looked at individual travel choices as a way to study access to illicit drug use, a case study that observes a homeless veteran could reveal how issues of personal mobility choices facilitate regular access to illicit drugs. Note that it is important to conduct a thorough literature review to ensure that your assumption about the need to reveal new insights or previously hidden problems is valid and evidence-based.
• Does the case challenge and offer a counter-point to prevailing assumptions? Over time, research on any given topic can fall into a trap of developing assumptions based on outdated studies that are still applied to new or changing conditions or the idea that something should simply be accepted as "common sense," even though the issue has not been thoroughly tested in practice. A case may offer you an opportunity to gather evidence that challenges prevailing assumptions about a research problem and provide a new set of recommendations applied to practice that have not been tested previously. For example, perhaps there has been a long practice among scholars to apply a particular theory in explaining the relationship between two subjects of analysis. Your case could challenge this assumption by applying an innovative theoretical framework [perhaps borrowed from another discipline] to the study a case in order to explore whether this approach offers new ways of understanding the research problem. Taking a contrarian stance is one of the most important ways that new knowledge and understanding develops from existing literature.
• Does the case provide an opportunity to pursue action leading to the resolution of a problem? Another way to think about choosing a case to study is to consider how the results from investigating a particular case may result in findings that reveal ways in which to resolve an existing or emerging problem. For example, studying the case of an unforeseen incident, such as a fatal accident at a railroad crossing, can reveal hidden issues that could be applied to preventative measures that contribute to reducing the chance of accidents in the future. In this example, a case study investigating the accident could lead to a better understanding of where to strategically locate additional signals at other railroad crossings in order to better warn drivers of an approaching train, particularly when visibility is hindered by heavy rain, fog, or at night.
• Does the case offer a new direction in future research? A case study can be used as a tool for exploratory research that points to a need for further examination of the research problem. A case can be used when there are few studies that help predict an outcome or that establish a clear understanding about how best to proceed in addressing a problem. For example, after conducting a thorough literature review [very important!], you discover that little research exists showing the ways in which women contribute to promoting water conservation in rural communities of Uganda. A case study of how women contribute to saving water in a particular village can lay the foundation for understanding the need for more thorough research that documents how women in their roles as cooks and family caregivers think about water as a valuable resource within their community throughout rural regions of east Africa. The case could also point to the need for scholars to apply feminist theories of work and family to the issue of water conservation.

Eisenhardt, Kathleen M. “Building Theories from Case Study Research.” Academy of Management Review 14 (October 1989): 532-550; Emmel, Nick. Sampling and Choosing Cases in Qualitative Research: A Realist Approach . Thousand Oaks, CA: SAGE Publications, 2013; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Seawright, Jason and John Gerring. "Case Selection Techniques in Case Study Research." Political Research Quarterly 61 (June 2008): 294-308.

Structure and Writing Style

The purpose of a paper in the social sciences designed around a case study is to thoroughly investigate a subject of analysis in order to reveal a new understanding about the research problem and, in so doing, contributing new knowledge to what is already known from previous studies. In applied social sciences disciplines [e.g., education, social work, public administration, etc.], case studies may also be used to reveal best practices, highlight key programs, or investigate interesting aspects of professional work. In general, the structure of a case study research paper is not all that different from a standard college-level research paper. However, there are subtle differences you should be aware of. Here are the key elements to organizing and writing a case study research paper.

I.  Introduction

As with any research paper, your introduction should serve as a roadmap for your readers to ascertain the scope and purpose of your study . The introduction to a case study research paper, however, should not only describe the research problem and its significance, but you should also succinctly describe why the case is being used and how it relates to addressing the problem. The two elements should be linked. With this in mind, a good introduction answers these four questions:

• What was I studying? Describe the research problem and describe the subject of analysis you have chosen to address the problem. Explain how they are linked and what elements of the case will help to expand knowledge and understanding about the problem.
• Why was this topic important to investigate? Describe the significance of the research problem and state why a case study design and the subject of analysis that the paper is designed around is appropriate in addressing the problem.
• What did we know about this topic before I did this study? Provide background that helps lead the reader into the more in-depth literature review to follow. If applicable, summarize prior case study research applied to the research problem and why it fails to adequately address the research problem. Describe why your case will be useful. If no prior case studies have been used to address the research problem, explain why you have selected this subject of analysis.
• How will this study advance new knowledge or new ways of understanding? Explain why your case study will be suitable in helping to expand knowledge and understanding about the research problem.

Each of these questions should be addressed in no more than a few paragraphs. Exceptions to this can be when you are addressing a complex research problem or subject of analysis that requires more in-depth background information.

II.  Literature Review

The literature review for a case study research paper is generally structured the same as it is for any college-level research paper. The difference, however, is that the literature review is focused on providing background information and  enabling historical interpretation of the subject of analysis in relation to the research problem the case is intended to address . This includes synthesizing studies that help to:

• Place relevant works in the context of their contribution to understanding the case study being investigated . This would include summarizing studies that have used a similar subject of analysis to investigate the research problem. If there is literature using the same or a very similar case to study, you need to explain why duplicating past research is important [e.g., conditions have changed; prior studies were conducted long ago, etc.].
• Describe the relationship each work has to the others under consideration that informs the reader why this case is applicable . Your literature review should include a description of any works that support using the case to study the research problem and the underlying research questions.
• Identify new ways to interpret prior research using the case study . If applicable, review any research that has examined the research problem using a different research design. Explain how your case study design may reveal new knowledge or a new perspective or that can redirect research in an important new direction.
• Resolve conflicts amongst seemingly contradictory previous studies . This refers to synthesizing any literature that points to unresolved issues of concern about the research problem and describing how the subject of analysis that forms the case study can help resolve these existing contradictions.
• Point the way in fulfilling a need for additional research . Your review should examine any literature that lays a foundation for understanding why your case study design and the subject of analysis around which you have designed your study may reveal a new way of approaching the research problem or offer a perspective that points to the need for additional research.
• Expose any gaps that exist in the literature that the case study could help to fill . Summarize any literature that not only shows how your subject of analysis contributes to understanding the research problem, but how your case contributes to a new way of understanding the problem that prior research has failed to do.
• Locate your own research within the context of existing literature [very important!] . Collectively, your literature review should always place your case study within the larger domain of prior research about the problem. The overarching purpose of reviewing pertinent literature in a case study paper is to demonstrate that you have thoroughly identified and synthesized prior studies in the context of explaining the relevance of the case in addressing the research problem.

III.  Method

In this section, you explain why you selected a particular subject of analysis to study and the strategy you used to identify and ultimately decide that your case was appropriate in addressing the research problem. The way you describe the methods used varies depending on the type of subject of analysis that frames your case study.

If your subject of analysis is an incident or event . In the social and behavioral sciences, the event or incident that represents the case to be studied is usually bounded by time and place, with a clear beginning and end and with an identifiable location or position relative to its surroundings. The subject of analysis can be a rare or critical event or it can focus on a typical or regular event. The purpose of studying a rare event is to illuminate new ways of thinking about the broader research problem or to test a hypothesis. Critical incident case studies must describe the method by which you identified the event and explain the process by which you determined the validity of this case to inform broader perspectives about the research problem or to reveal new findings. However, the event does not have to be a rare or uniquely significant to support new thinking about the research problem or to challenge an existing hypothesis. For example, Walo, Bull, and Breen conducted a case study to identify and evaluate the direct and indirect economic benefits and costs of a local sports event in the City of Lismore, New South Wales, Australia. The purpose of their study was to provide new insights from measuring the impact of a typical local sports event that prior studies could not measure well because they focused on large "mega-events." Whether the event is rare or not, the methods section should include an explanation of the following characteristics of the event: a) when did it take place; b) what were the underlying circumstances leading to the event; c) what were the consequences of the event.

If your subject of analysis is a person. Explain why you selected this particular individual to be studied and describe what experience he or she has had that provides an opportunity to advance new understandings about the research problem. Mention any background about this person which might help the reader understand the significance of his/her experiences that make them worthy of study. This includes describing the relationships this person has had with other people, institutions, and/or events that support using him or her as the subject for a case study research paper. It is particularly important to differentiate the person as the subject of analysis from others and to succinctly explain how the person relates to examining the research problem.

If your subject of analysis is a place. In general, a case study that investigates a place suggests a subject of analysis that is unique or special in some way and that this uniqueness can be used to build new understanding or knowledge about the research problem. A case study of a place must not only describe its various attributes relevant to the research problem [e.g., physical, social, cultural, economic, political, etc.], but you must state the method by which you determined that this place will illuminate new understandings about the research problem. It is also important to articulate why a particular place as the case for study is being used if similar places also exist [i.e., if you are studying patterns of homeless encampments of veterans in open spaces, why study Echo Park in Los Angeles rather than Griffith Park?]. If applicable, describe what type of human activity involving this place makes it a good choice to study [e.g., prior research reveals Echo Park has more homeless veterans].

If your subject of analysis is a phenomenon. A phenomenon refers to a fact, occurrence, or circumstance that can be studied or observed but with the cause or explanation to be in question. In this sense, a phenomenon that forms your subject of analysis can encompass anything that can be observed or presumed to exist but is not fully understood. In the social and behavioral sciences, the case usually focuses on human interaction within a complex physical, social, economic, cultural, or political system. For example, the phenomenon could be the observation that many vehicles used by ISIS fighters are small trucks with English language advertisements on them. The research problem could be that ISIS fighters are difficult to combat because they are highly mobile. The research questions could be how and by what means are these vehicles used by ISIS being supplied to the militants and how might supply lines to these vehicles be cut? How might knowing the suppliers of these trucks from overseas reveal larger networks of collaborators and financial support? A case study of a phenomenon most often encompasses an in-depth analysis of a cause and effect that is grounded in an interactive relationship between people and their environment in some way.

NOTE:   The choice of the case or set of cases to study cannot appear random. Evidence that supports the method by which you identified and chose your subject of analysis should be linked to the findings from the literature review. Be sure to cite any prior studies that helped you determine that the case you chose was appropriate for investigating the research problem.

IV.  Discussion

The main elements of your discussion section are generally the same as any research paper, but centered around interpreting and drawing conclusions about the key findings from your case study. Note that a general social sciences research paper may contain a separate section to report findings. However, in a paper designed around a case study, it is more common to combine a description of the findings with the discussion about their implications. The objectives of your discussion section should include the following:

Reiterate the Research Problem/State the Major Findings Briefly reiterate the research problem you are investigating and explain why the subject of analysis around which you designed the case study were used. You should then describe the findings revealed from your study of the case using direct, declarative, and succinct proclamation of the study results. Highlight any findings that were unexpected or especially profound.

Explain the Meaning of the Findings and Why They are Important Systematically explain the meaning of your case study findings and why you believe they are important. Begin this part of the section by repeating what you consider to be your most important or surprising finding first, then systematically review each finding. Be sure to thoroughly extrapolate what your analysis of the case can tell the reader about situations or conditions beyond the actual case that was studied while, at the same time, being careful not to misconstrue or conflate a finding that undermines the external validity of your conclusions.

Relate the Findings to Similar Studies No study in the social sciences is so novel or possesses such a restricted focus that it has absolutely no relation to previously published research. The discussion section should relate your case study results to those found in other studies, particularly if questions raised from prior studies served as the motivation for choosing your subject of analysis. This is important because comparing and contrasting the findings of other studies helps to support the overall importance of your results and it highlights how and in what ways your case study design and the subject of analysis differs from prior research about the topic.

Consider Alternative Explanations of the Findings It is important to remember that the purpose of social science research is to discover and not to prove. When writing the discussion section, you should carefully consider all possible explanations for the case study results, rather than just those that fit your hypothesis or prior assumptions and biases. Be alert to what the in-depth analysis of the case may reveal about the research problem, including offering a contrarian perspective to what scholars have stated in prior research.

Acknowledge the Study's Limitations You can state the study's limitations in the conclusion section of your paper but describing the limitations of your subject of analysis in the discussion section provides an opportunity to identify the limitations and explain why they are not significant. This part of the discussion section should also note any unanswered questions or issues your case study could not address. More detailed information about how to document any limitations to your research can be found here .

Suggest Areas for Further Research Although your case study may offer important insights about the research problem, there are likely additional questions related to the problem that remain unanswered or findings that unexpectedly revealed themselves as a result of your in-depth analysis of the case. Be sure that the recommendations for further research are linked to the research problem and that you explain why your recommendations are valid in other contexts and based on the original assumptions of your study.

V.  Conclusion

As with any research paper, you should summarize your conclusion in clear, simple language; emphasize how the findings from your case study differs from or supports prior research and why. Do not simply reiterate the discussion section. Provide a synthesis of key findings presented in the paper to show how these converge to address the research problem. If you haven't already done so in the discussion section, be sure to document the limitations of your case study and needs for further research.

The function of your paper's conclusion is to: 1)  restate the main argument supported by the findings from the analysis of your case; 2) clearly state the context, background, and necessity of pursuing the research problem using a case study design in relation to an issue, controversy, or a gap found from reviewing the literature; and, 3) provide a place for you to persuasively and succinctly restate the significance of your research problem, given that the reader has now been presented with in-depth information about the topic.

Consider the following points to help ensure your conclusion is appropriate:

• If the argument or purpose of your paper is complex, you may need to summarize these points for your reader.
• If prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the conclusion of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration of the case study's findings that returns the topic to the context provided by the introduction or within a new context that emerges from your case study findings.

Note that, depending on the discipline you are writing in and your professor's preferences, the concluding paragraph may contain your final reflections on the evidence presented applied to practice or on the essay's central research problem. However, the nature of being introspective about the subject of analysis you have investigated will depend on whether you are explicitly asked to express your observations in this way.

Problems to Avoid

Overgeneralization One of the goals of a case study is to lay a foundation for understanding broader trends and issues applied to similar circumstances. However, be careful when drawing conclusions from your case study. They must be evidence-based and grounded in the results of the study; otherwise, it is merely speculation. Looking at a prior example, it would be incorrect to state that a factor in improving girls access to education in Azerbaijan and the policy implications this may have for improving access in other Muslim nations is due to girls access to social media if there is no documentary evidence from your case study to indicate this. There may be anecdotal evidence that retention rates were better for girls who were on social media, but this observation would only point to the need for further research and would not be a definitive finding if this was not a part of your original research agenda.

Failure to Document Limitations No case is going to reveal all that needs to be understood about a research problem. Therefore, just as you have to clearly state the limitations of a general research study , you must describe the specific limitations inherent in the subject of analysis. For example, the case of studying how women conceptualize the need for water conservation in a village in Uganda could have limited application in other cultural contexts or in areas where fresh water from rivers or lakes is plentiful and, therefore, conservation is understood differently than preserving access to a scarce resource.

Failure to Extrapolate All Possible Implications Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings. If you do not, your reader may question the validity of your analysis, particularly if you failed to document an obvious outcome from your case study research. For example, in the case of studying the accident at the railroad crossing to evaluate where and what types of warning signals should be located, you failed to take into consideration speed limit signage as well as warning signals. When designing your case study, be sure you have thoroughly addressed all aspects of the problem and do not leave gaps in your analysis.

Case Studies . Writing@CSU. Colorado State University; Gerring, John. Case Study Research: Principles and Practices . New York: Cambridge University Press, 2007; Merriam, Sharan B. Qualitative Research and Case Study Applications in Education . Rev. ed. San Francisco, CA: Jossey-Bass, 1998; Miller, Lisa L. “The Use of Case Studies in Law and Social Science Research.” Annual Review of Law and Social Science 14 (2018): TBD; Mills, Albert J., Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Putney, LeAnn Grogan. "Case Study." In Encyclopedia of Research Design , Neil J. Salkind, editor. (Thousand Oaks, CA: SAGE Publications, 2010), pp. 116-120; Simons, Helen. Case Study Research in Practice . London: SAGE Publications, 2009;  Kratochwill,  Thomas R. and Joel R. Levin, editors. Single-Case Research Design and Analysis: New Development for Psychology and Education .  Hilldsale, NJ: Lawrence Erlbaum Associates, 1992; Swanborn, Peter G. Case Study Research: What, Why and How? London : SAGE, 2010; Yin, Robert K. Case Study Research: Design and Methods . 6th edition. Los Angeles, CA, SAGE Publications, 2014; Walo, Maree, Adrian Bull, and Helen Breen. “Achieving Economic Benefits at Local Events: A Case Study of a Local Sports Event.” Festival Management and Event Tourism 4 (1996): 95-106.

Writing Tip

At Least Five Misconceptions about Case Study Research

Social science case studies are often perceived as limited in their ability to create new knowledge because they are not randomly selected and findings cannot be generalized to larger populations. Flyvbjerg examines five misunderstandings about case study research and systematically "corrects" each one. To quote, these are:

Misunderstanding 1 :  General, theoretical [context-independent knowledge is more valuable than concrete, practical (context-dependent) knowledge. Misunderstanding 2 :  One cannot generalize on the basis of an individual case; therefore, the case study cannot contribute to scientific development. Misunderstanding 3 :  The case study is most useful for generating hypotheses; that is, in the first stage of a total research process, whereas other methods are more suitable for hypotheses testing and theory building. Misunderstanding 4 :  The case study contains a bias toward verification, that is, a tendency to confirm the researcher’s preconceived notions. Misunderstanding 5 :  It is often difficult to summarize and develop general propositions and theories on the basis of specific case studies [p. 221].

While writing your paper, think introspectively about how you addressed these misconceptions because to do so can help you strengthen the validity and reliability of your research by clarifying issues of case selection, the testing and challenging of existing assumptions, the interpretation of key findings, and the summation of case outcomes. Think of a case study research paper as a complete, in-depth narrative about the specific properties and key characteristics of your subject of analysis applied to the research problem.

Flyvbjerg, Bent. “Five Misunderstandings About Case-Study Research.” Qualitative Inquiry 12 (April 2006): 219-245.

• << Previous: Reviewing Collected Essays
• Next: Writing a Field Report >>
• Last Updated: Jan 17, 2023 10:50 AM
• URL: https://libguides.pointloma.edu/ResearchPaper

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

What Is a Case Study?

Weighing the pros and cons of this method of research

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Cara Lustik is a fact-checker and copywriter.

Verywell / Colleen Tighe

• Pros and Cons

What Types of Case Studies Are Out There?

Where do you find data for a case study, how do i write a psychology case study.

A case study is an in-depth study of one person, group, or event. In a case study, nearly every aspect of the subject's life and history is analyzed to seek patterns and causes of behavior. Case studies can be used in many different fields, including psychology, medicine, education, anthropology, political science, and social work.

The point of a case study is to learn as much as possible about an individual or group so that the information can be generalized to many others. Unfortunately, case studies tend to be highly subjective, and it is sometimes difficult to generalize results to a larger population.

While case studies focus on a single individual or group, they follow a format similar to other types of psychology writing. If you are writing a case study, we got you—here are some rules of APA format to reference.  

At a Glance

A case study, or an in-depth study of a person, group, or event, can be a useful research tool when used wisely. In many cases, case studies are best used in situations where it would be difficult or impossible for you to conduct an experiment. They are helpful for looking at unique situations and allow researchers to gather a lot of˜ information about a specific individual or group of people. However, it's important to be cautious of any bias we draw from them as they are highly subjective.

What Are the Benefits and Limitations of Case Studies?

A case study can have its strengths and weaknesses. Researchers must consider these pros and cons before deciding if this type of study is appropriate for their needs.

One of the greatest advantages of a case study is that it allows researchers to investigate things that are often difficult or impossible to replicate in a lab. Some other benefits of a case study:

• Allows researchers to capture information on the 'how,' 'what,' and 'why,' of something that's implemented
• Gives researchers the chance to collect information on why one strategy might be chosen over another
• Permits researchers to develop hypotheses that can be explored in experimental research

On the other hand, a case study can have some drawbacks:

• It cannot necessarily be generalized to the larger population
• Cannot demonstrate cause and effect
• It may not be scientifically rigorous
• It can lead to bias

Researchers may choose to perform a case study if they want to explore a unique or recently discovered phenomenon. Through their insights, researchers develop additional ideas and study questions that might be explored in future studies.

It's important to remember that the insights from case studies cannot be used to determine cause-and-effect relationships between variables. However, case studies may be used to develop hypotheses that can then be addressed in experimental research.

Case Study Examples

There have been a number of notable case studies in the history of psychology. Much of  Freud's work and theories were developed through individual case studies. Some great examples of case studies in psychology include:

• Anna O : Anna O. was a pseudonym of a woman named Bertha Pappenheim, a patient of a physician named Josef Breuer. While she was never a patient of Freud's, Freud and Breuer discussed her case extensively. The woman was experiencing symptoms of a condition that was then known as hysteria and found that talking about her problems helped relieve her symptoms. Her case played an important part in the development of talk therapy as an approach to mental health treatment.
• Phineas Gage : Phineas Gage was a railroad employee who experienced a terrible accident in which an explosion sent a metal rod through his skull, damaging important portions of his brain. Gage recovered from his accident but was left with serious changes in both personality and behavior.
• Genie : Genie was a young girl subjected to horrific abuse and isolation. The case study of Genie allowed researchers to study whether language learning was possible, even after missing critical periods for language development. Her case also served as an example of how scientific research may interfere with treatment and lead to further abuse of vulnerable individuals.

Such cases demonstrate how case research can be used to study things that researchers could not replicate in experimental settings. In Genie's case, her horrific abuse denied her the opportunity to learn a language at critical points in her development.

This is clearly not something researchers could ethically replicate, but conducting a case study on Genie allowed researchers to study phenomena that are otherwise impossible to reproduce.

There are a few different types of case studies that psychologists and other researchers might use:

• Collective case studies : These involve studying a group of individuals. Researchers might study a group of people in a certain setting or look at an entire community. For example, psychologists might explore how access to resources in a community has affected the collective mental well-being of those who live there.
• Descriptive case studies : These involve starting with a descriptive theory. The subjects are then observed, and the information gathered is compared to the pre-existing theory.
• Explanatory case studies : These   are often used to do causal investigations. In other words, researchers are interested in looking at factors that may have caused certain things to occur.
• Exploratory case studies : These are sometimes used as a prelude to further, more in-depth research. This allows researchers to gather more information before developing their research questions and hypotheses .
• Instrumental case studies : These occur when the individual or group allows researchers to understand more than what is initially obvious to observers.
• Intrinsic case studies : This type of case study is when the researcher has a personal interest in the case. Jean Piaget's observations of his own children are good examples of how an intrinsic case study can contribute to the development of a psychological theory.

The three main case study types often used are intrinsic, instrumental, and collective. Intrinsic case studies are useful for learning about unique cases. Instrumental case studies help look at an individual to learn more about a broader issue. A collective case study can be useful for looking at several cases simultaneously.

The type of case study that psychology researchers use depends on the unique characteristics of the situation and the case itself.

There are a number of different sources and methods that researchers can use to gather information about an individual or group. Six major sources that have been identified by researchers are:

• Archival records : Census records, survey records, and name lists are examples of archival records.
• Direct observation : This strategy involves observing the subject, often in a natural setting . While an individual observer is sometimes used, it is more common to utilize a group of observers.
• Documents : Letters, newspaper articles, administrative records, etc., are the types of documents often used as sources.
• Interviews : Interviews are one of the most important methods for gathering information in case studies. An interview can involve structured survey questions or more open-ended questions.
• Participant observation : When the researcher serves as a participant in events and observes the actions and outcomes, it is called participant observation.
• Physical artifacts : Tools, objects, instruments, and other artifacts are often observed during a direct observation of the subject.

If you have been directed to write a case study for a psychology course, be sure to check with your instructor for any specific guidelines you need to follow. If you are writing your case study for a professional publication, check with the publisher for their specific guidelines for submitting a case study.

Here is a general outline of what should be included in a case study.

Section 1: A Case History

This section will have the following structure and content:

Background information : The first section of your paper will present your client's background. Include factors such as age, gender, work, health status, family mental health history, family and social relationships, drug and alcohol history, life difficulties, goals, and coping skills and weaknesses.

Description of the presenting problem : In the next section of your case study, you will describe the problem or symptoms that the client presented with.

Describe any physical, emotional, or sensory symptoms reported by the client. Thoughts, feelings, and perceptions related to the symptoms should also be noted. Any screening or diagnostic assessments that are used should also be described in detail and all scores reported.

Your diagnosis : Provide your diagnosis and give the appropriate Diagnostic and Statistical Manual code. Explain how you reached your diagnosis, how the client's symptoms fit the diagnostic criteria for the disorder(s), or any possible difficulties in reaching a diagnosis.

Section 2: Treatment Plan

This portion of the paper will address the chosen treatment for the condition. This might also include the theoretical basis for the chosen treatment or any other evidence that might exist to support why this approach was chosen.

• Cognitive behavioral approach : Explain how a cognitive behavioral therapist would approach treatment. Offer background information on cognitive behavioral therapy and describe the treatment sessions, client response, and outcome of this type of treatment. Make note of any difficulties or successes encountered by your client during treatment.
• Humanistic approach : Describe a humanistic approach that could be used to treat your client, such as client-centered therapy . Provide information on the type of treatment you chose, the client's reaction to the treatment, and the end result of this approach. Explain why the treatment was successful or unsuccessful.
• Psychoanalytic approach : Describe how a psychoanalytic therapist would view the client's problem. Provide some background on the psychoanalytic approach and cite relevant references. Explain how psychoanalytic therapy would be used to treat the client, how the client would respond to therapy, and the effectiveness of this treatment approach.
• Pharmacological approach : If treatment primarily involves the use of medications, explain which medications were used and why. Provide background on the effectiveness of these medications and how monotherapy may compare with an approach that combines medications with therapy or other treatments.

This section of a case study should also include information about the treatment goals, process, and outcomes.

When you are writing a case study, you should also include a section where you discuss the case study itself, including the strengths and limitiations of the study. You should note how the findings of your case study might support previous research. 

In your discussion section, you should also describe some of the implications of your case study. What ideas or findings might require further exploration? How might researchers go about exploring some of these questions in additional studies?

Need More Tips?

Here are a few additional pointers to keep in mind when formatting your case study:

• Never refer to the subject of your case study as "the client." Instead, use their name or a pseudonym.
• Read examples of case studies to gain an idea about the style and format.
• Remember to use APA format when citing references .

Crowe S, Cresswell K, Robertson A, Huby G, Avery A, Sheikh A. The case study approach .  BMC Med Res Methodol . 2011;11:100.

Crowe S, Cresswell K, Robertson A, Huby G, Avery A, Sheikh A. The case study approach . BMC Med Res Methodol . 2011 Jun 27;11:100. doi:10.1186/1471-2288-11-100

Gagnon, Yves-Chantal.  The Case Study as Research Method: A Practical Handbook . Canada, Chicago Review Press Incorporated DBA Independent Pub Group, 2010.

Yin, Robert K. Case Study Research and Applications: Design and Methods . United States, SAGE Publications, 2017.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."