quantitative research requires less number of respondents

Skip navigation

World Leaders in Research-Based User Experience

How many participants for quantitative usability studies: a summary of sample-size recommendations.

July 25, 2021 2021-07-25

• Email article
• Share on LinkedIn
• Share on Twitter

In This Article:

Introduction, the intuition behind the 40-participants guideline: why you need 40 participants, the assumptions behind the 40-participant guideline, when you may get away with fewer participants, what if your metric is continuous.

The exact number of participants required for quantitative usability testing can vary. Apparently contradictory recommendations (ranging from 20 to 30 to 40 or more) often confuse new quantitative UX researchers. (In fact, we’ve recommended different numbers over the years.)

Where do these recommendations come from and how many participants do you really need? This is an important question. If you test with too few , your results may not be statistically reliable . If you test with too many, you’re essentially throwing your money away. We want to strike the perfect balance — collecting enough data points to be confident in our results, but not so many that we’re wasting precious research funding.

In most cases, we recommend 40 participants for quantitative studies. If you don’t really care about the reasoning behind that number, you can stop reading here. Read on if you do want to know where that number comes from, when to use a different number, and why you may have seen different recommendations.

Since this is a common confusion, let’s clarify: there are two kinds of studies, qualitative and quantitative. Qual aims at insights, not numbers , so statistical significance doesn’t come into play. In contrast, quant does focus on collecting UX metrics , so we need to ensure that these numbers are correct. And the key point: this article is about quant, not qual . ( Qualitative studies only need a small number of users , but that’s not what we’re discussing here.)

When we conduct quantitative usability studies, we’re collecting UX metrics — numbers that represent some aspect of the user experience.

For example, we might want to know what percentage of our users are able to book a hotel room on Expedia, a travel-booking site. We won’t be able to ask every Expedia user to try to book a hotel room. Instead, we will run a study in which will ask a subset of our target population of Expedia users to make a reservation.

Then, we’ll count how many participants in that study are able to complete the task and we’ll use that percentage to estimate the percentage of our population. Of course, what we get from the study is not going to be exactly the same as our population success rate (there is always going to be some amount of measurement error), but we hope that it will be close enough.

When the number of people we include in the study is small, the percentage from the study will be unlikely to predict the success rate of the whole population — that number will simply be too noisy.

As another example, image you want to figure out the average daily temperature in Berlin, Germany during the summer. You decide to estimate that average by looking only at three random daily temperatures. Those three days probably will not give you a very accurate number, will they? This is the problem with small samples for quantitative studies.

In a quantitative usability study, to get a reasonably trustworthy prediction for the behavior of your overall population, you need around 40 data points. There are nuances depending on how much risk you are willing to take and what exactly you are trying to measure.

The 40-participant recommendation comes from a calculation . That calculation estimates the minimum number of users needed to produce a reasonable prediction of your population behavior based on one study. It has specific assumptions, but it will work for many quantitative usability studies .

If you don’t care about statistics, you can stop reading at this point (or jump directly to the conclusion ). Otherwise, if you’re curious about the nuances behind this recommendation, keep reading.

In statistical terms, the 40-participant guideline comes from a very specific situation, which may or may not apply to your particular scenario. It assumes that you have a considerable user population (over 500 people) and that the following are true:

• You want to estimate a binary metric such as success rate or conversion rate based on a study with a sample of your user population.
• You aim for a 15% margin of error — namely, you want your true score (e.g., the success rate or conversion rate for your whole population) to be within 15% of the observed score (the percentage you obtained from your study).
• You want to take very little risk of being wrong in this prediction (that is, you will use a confidence level of 95% for computing your margin of error).

If all the above are true, it turns out that you can calculate the number of participants you need for your study, and it is 39. We round it up to 40 — hence the above recommendation. (These estimates are often rounded up by a few participants. First, rounding up makes the numbers more memorable. Second, slight overrecruiting helps if something goes wrong with one or two participants and their data has to be removed. For example, you may discover during the study that you accidentally recruited an unrepresentative user or a cheater.)

It is possible to need fewer participants if the last two of the assumptions above are not true. Specifically, if you are:

• Willing to have a margin of error that is bigger than 15% 
• Willing to take a larger risk  

Willing to Have a Margin of Error Bigger than 15% 

The margin of error tells you how much you can expect your overall population rate to vary as a function of the observed score. Any time you collect a metric you should compute a margin of error (or, equivalently, a confidence interval). In other words, if in your Expedia study, 70% of your study participants were able to book a room and your margin of error was 15%, it means that your whole-population completion rate (the true score) is 70% ± 15% — that is, it could be anywhere from 55% to 85%.

That range is 30% wide and it represents the precision of your estimate; it could, however, be the case that in some situations you don’t care if it’s a little wider and your margin of error is bigger (for example, if you want to be able to say that most people can use a certain feature of your UI). We don’t recommend going for margins of error bigger than 20% because your confidence interval for the true score will be quite wide and unlikely to be useful. 

Willing to Take a Larger Risk  

A 95% confidence level means that your margin of error computations will be wrong only 5% of the time. It is the gold standard for published academic research. However, most UX researchers work in applied research, not academic research. For practical purposes, you may be willing to take a little bit more risk.

(Taking more risk is cheaper and is a good idea if the risks of a somewhat unreliable result won’t be catastrophic. However, bear in mind that UX teams often use quantitative usability testing to inform prioritization and resource allocation, so unreliable data may be quite problematic.)

If you are willing to drop the confidence level to 90%, then a margin of error of 15% will require 28 users and a margin of error of 20% will require 15 users . Again, you may consider rounding these up for many good reasons (for example, you may end up having to remove some of your trials when you clean up the data). This is the origin of the 30-user guideline that you may have encountered elsewhere — that recommendation accepts more risk.

This table shows the number of participants needed for different confidence levels and desired margins of error for binary metrics. The lower the confidence level, the riskier the study. The bigger the margin of error, the lower your precision and the less useful the numbers will be.

If your metric is continuous or can be treated as continuous (e.g., task time, satisfaction or other types of rating, SUS score ), the formula for the number of participants will depend on an additional factor: the variability of your target population. (It will also depend, like for binary metrics, on the desired margin of error and the confidence level used). That is something that you could estimate separately for your population by running a pilot study.

Of course, a pilot study to estimate the standard deviation is quite expensive and it will itself involve a fairly large number of participants. On the other hand, in most quantitative usability studies, there are several metrics involved and usually at least one of them is binary. Therefore, we recommend using that binary metric as a constraint in deciding the number of users. In other words, if you are collecting success, task time, and satisfaction, then you can simply say I want a 15% margin of error for success at a 90% or 95% confidence level (and recruit 30 or 40 users respectively). That will usually result in good margins of error for the other metrics involved.

If, however, you collect only continuous metrics (this is unusual) and you cannot afford to estimate the standard deviation of your population, you must first settle on a desired value for your margin of error. Of course, your desired value will depend on what you are measuring and the range for a task. We usually recommend using as a desired value 15% or 20% of the mean — in other words, if your task time is around 1 minute, you would like a margin of error no bigger than 0.15–0.20 minutes (9 to 12 seconds); if your task time is around 10 minutes, your margin of error should be no bigger than 1.5–2 minutes.

Next, you can use Jakob Nielsen’s estimate of variability for website- and intranet-related continuous metrics . That estimate is 52% of the mean .  In other words, if the mean task time is 1 min, your estimated standard deviation is 0.52 x 1 min = 0.52 minutes. If the mean task time is 10 minutes, then your estimated standard deviation will be 0.52 x 10 min = 5.2 minutes. With that supplementary assumption, you would need 47 users for a 15% margin of error at 95% confidence level, 33 users for a 15% margin of error at 90% confidence level, 26 users for a 20% margin of error at 95% confidence level and 19 users for a 20% margin of error at 90% confidence level. (Note that a 15% margin of error of 1 minute translates into 0.15 minutes — that is, 9 seconds.)

This table shows the required number of participants needed for a study involving continuous metrics such as time on task or satisfaction. Different numbers of participants are appropriate for different confidence levels and desired margins of error.

In general, the number of users can be determined using the following formula:

The variables in that formula are:

• K is a constant (1.96 for 95% confidence level or 1.645 for 90% confidence level)
• s is your standard deviation as a proportion of the mean
• m is your desired margin of error, also expressed as a proportion of the mean (0.15 corresponding to 15% or 0.20 corresponding to 20%)

If you estimate your standard deviation as a 52% (or 0.52) of the mean, then you can use the formula below:

Even though there are many different recommendations for sample sizes in quantitative usability testing, they are all consistent with each other — they simply make slightly different assumptions. We think the 40-user guideline is the simplest and the most likely to lead to good results — namely, a relatively small margin of error with a high confidence level.

However, you may settle for a lower number of users (around 30) if you want to take slightly more risk that your findings will not represent the behavior of your user population and thus decrease your confidence level to 90%. Moreover, if you also have tolerance for a larger margin of error, you can drop the number of users to 20 or even fewer, but that is generally a lot riskier.

An acceptable strategy (especially if you are on a tight budget and mostly interested in continuous metrics such as task time and satisfaction) is to start with as many users as you can comfortably afford — say, 20–25 users. Once you’ve collected your data from these users, calculate your margins of error and determine if they are tight enough for your purposes. If they are too wide, then consider adding more users. This approach, however, requires that you work fast: you’ll need to do your analysis in a matter of a few days in order to be able to run the extra participants very soon after the first batch. Otherwise, you risk compromising the validity of your study.

Choose the right sample size for your situation to ensure you’ll optimize your quantitative study: collecting just enough data, but not too much.

Jeff Sauro, James Lewis. 2016. Quantifying the User Experience: Practical Statistics for User Research . Elsevier.

Related Courses

How to interpret ux numbers: statistics for ux.

When research data should be trusted; what statistics to use when

Measuring UX and ROI

Use metrics from quantitative research to demonstrate value

Remote User Research

Collect insights without leaving your desk

Related Topics

• Research Methods Research Methods

Learn More:

How to Present UX Research Results Responsibly

Caleb Sponheim · 3 min

Card Sorting: Why & When

Samhita Tankala · 3 min

Measurement Error in UX Research

Related Articles:

Why You Cannot Trust Numbers from Qualitative Usability Studies

Raluca Budiu · 9 min

10 Survey Challenges and How to Avoid Them

Tanner Kohler · 15 min

Quantitative UX: Glossary

Raluca Budiu · 8 min

CASTLE Framework for Productivity/Workplace Applications

Page Laubheimer · 8 min

Confounding Variables in Quantitative Studies

Caleb Sponheim · 5 min

Should You Run a Survey?

Maddie Brown · 6 min

Qualitative vs Quantitative Research Methods & Data Analysis

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

What is the difference between quantitative and qualitative?

The main difference between quantitative and qualitative research is the type of data they collect and analyze.

Quantitative research collects numerical data and analyzes it using statistical methods. The aim is to produce objective, empirical data that can be measured and expressed in numerical terms. Quantitative research is often used to test hypotheses, identify patterns, and make predictions.

Qualitative research , on the other hand, collects non-numerical data such as words, images, and sounds. The focus is on exploring subjective experiences, opinions, and attitudes, often through observation and interviews.

Qualitative research aims to produce rich and detailed descriptions of the phenomenon being studied, and to uncover new insights and meanings.

Quantitative data is information about quantities, and therefore numbers, and qualitative data is descriptive, and regards phenomenon which can be observed but not measured, such as language.

What Is Qualitative Research?

Qualitative research is the process of collecting, analyzing, and interpreting non-numerical data, such as language. Qualitative research can be used to understand how an individual subjectively perceives and gives meaning to their social reality.

Qualitative data is non-numerical data, such as text, video, photographs, or audio recordings. This type of data can be collected using diary accounts or in-depth interviews and analyzed using grounded theory or thematic analysis.

Qualitative research is multimethod in focus, involving an interpretive, naturalistic approach to its subject matter. This means that qualitative researchers study things in their natural settings, attempting to make sense of, or interpret, phenomena in terms of the meanings people bring to them. Denzin and Lincoln (1994, p. 2)

Interest in qualitative data came about as the result of the dissatisfaction of some psychologists (e.g., Carl Rogers) with the scientific study of psychologists such as behaviorists (e.g., Skinner ).

Since psychologists study people, the traditional approach to science is not seen as an appropriate way of carrying out research since it fails to capture the totality of human experience and the essence of being human.  Exploring participants’ experiences is known as a phenomenological approach (re: Humanism ).

Qualitative research is primarily concerned with meaning, subjectivity, and lived experience. The goal is to understand the quality and texture of people’s experiences, how they make sense of them, and the implications for their lives.

Qualitative research aims to understand the social reality of individuals, groups, and cultures as nearly as possible as participants feel or live it. Thus, people and groups are studied in their natural setting.

Some examples of qualitative research questions are provided, such as what an experience feels like, how people talk about something, how they make sense of an experience, and how events unfold for people.

Research following a qualitative approach is exploratory and seeks to explain ‘how’ and ‘why’ a particular phenomenon, or behavior, operates as it does in a particular context. It can be used to generate hypotheses and theories from the data.

Qualitative Methods

There are different types of qualitative research methods, including diary accounts, in-depth interviews , documents, focus groups , case study research , and ethnography.

The results of qualitative methods provide a deep understanding of how people perceive their social realities and in consequence, how they act within the social world.

The researcher has several methods for collecting empirical materials, ranging from the interview to direct observation, to the analysis of artifacts, documents, and cultural records, to the use of visual materials or personal experience. Denzin and Lincoln (1994, p. 14)

Here are some examples of qualitative data:

Interview transcripts : Verbatim records of what participants said during an interview or focus group. They allow researchers to identify common themes and patterns, and draw conclusions based on the data. Interview transcripts can also be useful in providing direct quotes and examples to support research findings.

Observations : The researcher typically takes detailed notes on what they observe, including any contextual information, nonverbal cues, or other relevant details. The resulting observational data can be analyzed to gain insights into social phenomena, such as human behavior, social interactions, and cultural practices.

Unstructured interviews : generate qualitative data through the use of open questions.  This allows the respondent to talk in some depth, choosing their own words.  This helps the researcher develop a real sense of a person’s understanding of a situation.

Diaries or journals : Written accounts of personal experiences or reflections.

Notice that qualitative data could be much more than just words or text. Photographs, videos, sound recordings, and so on, can be considered qualitative data. Visual data can be used to understand behaviors, environments, and social interactions.

Qualitative Data Analysis

Qualitative research is endlessly creative and interpretive. The researcher does not just leave the field with mountains of empirical data and then easily write up his or her findings.

Qualitative interpretations are constructed, and various techniques can be used to make sense of the data, such as content analysis, grounded theory (Glaser & Strauss, 1967), thematic analysis (Braun & Clarke, 2006), or discourse analysis.

For example, thematic analysis is a qualitative approach that involves identifying implicit or explicit ideas within the data. Themes will often emerge once the data has been coded .

Key Features

• Events can be understood adequately only if they are seen in context. Therefore, a qualitative researcher immerses her/himself in the field, in natural surroundings. The contexts of inquiry are not contrived; they are natural. Nothing is predefined or taken for granted.
• Qualitative researchers want those who are studied to speak for themselves, to provide their perspectives in words and other actions. Therefore, qualitative research is an interactive process in which the persons studied teach the researcher about their lives.
• The qualitative researcher is an integral part of the data; without the active participation of the researcher, no data exists.
• The study’s design evolves during the research and can be adjusted or changed as it progresses. For the qualitative researcher, there is no single reality. It is subjective and exists only in reference to the observer.
• The theory is data-driven and emerges as part of the research process, evolving from the data as they are collected.

Limitations of Qualitative Research

• Because of the time and costs involved, qualitative designs do not generally draw samples from large-scale data sets.
• The problem of adequate validity or reliability is a major criticism. Because of the subjective nature of qualitative data and its origin in single contexts, it is difficult to apply conventional standards of reliability and validity. For example, because of the central role played by the researcher in the generation of data, it is not possible to replicate qualitative studies.
• Also, contexts, situations, events, conditions, and interactions cannot be replicated to any extent, nor can generalizations be made to a wider context than the one studied with confidence.
• The time required for data collection, analysis, and interpretation is lengthy. Analysis of qualitative data is difficult, and expert knowledge of an area is necessary to interpret qualitative data. Great care must be taken when doing so, for example, looking for mental illness symptoms.

Advantages of Qualitative Research

• Because of close researcher involvement, the researcher gains an insider’s view of the field. This allows the researcher to find issues that are often missed (such as subtleties and complexities) by the scientific, more positivistic inquiries.
• Qualitative descriptions can be important in suggesting possible relationships, causes, effects, and dynamic processes.
• Qualitative analysis allows for ambiguities/contradictions in the data, which reflect social reality (Denscombe, 2010).
• Qualitative research uses a descriptive, narrative style; this research might be of particular benefit to the practitioner as she or he could turn to qualitative reports to examine forms of knowledge that might otherwise be unavailable, thereby gaining new insight.

What Is Quantitative Research?

Quantitative research involves the process of objectively collecting and analyzing numerical data to describe, predict, or control variables of interest.

The goals of quantitative research are to test causal relationships between variables , make predictions, and generalize results to wider populations.

Quantitative researchers aim to establish general laws of behavior and phenomenon across different settings/contexts. Research is used to test a theory and ultimately support or reject it.

Quantitative Methods

Experiments typically yield quantitative data, as they are concerned with measuring things.  However, other research methods, such as controlled observations and questionnaires , can produce both quantitative information.

For example, a rating scale or closed questions on a questionnaire would generate quantitative data as these produce either numerical data or data that can be put into categories (e.g., “yes,” “no” answers).

Experimental methods limit how research participants react to and express appropriate social behavior.

Findings are, therefore, likely to be context-bound and simply a reflection of the assumptions that the researcher brings to the investigation.

There are numerous examples of quantitative data in psychological research, including mental health. Here are a few examples:

Another example is the Experience in Close Relationships Scale (ECR), a self-report questionnaire widely used to assess adult attachment styles .

The ECR provides quantitative data that can be used to assess attachment styles and predict relationship outcomes.

Neuroimaging data : Neuroimaging techniques, such as MRI and fMRI, provide quantitative data on brain structure and function.

This data can be analyzed to identify brain regions involved in specific mental processes or disorders.

For example, the Beck Depression Inventory (BDI) is a clinician-administered questionnaire widely used to assess the severity of depressive symptoms in individuals.

The BDI consists of 21 questions, each scored on a scale of 0 to 3, with higher scores indicating more severe depressive symptoms. 

Quantitative Data Analysis

Statistics help us turn quantitative data into useful information to help with decision-making. We can use statistics to summarize our data, describing patterns, relationships, and connections. Statistics can be descriptive or inferential.

Descriptive statistics help us to summarize our data. In contrast, inferential statistics are used to identify statistically significant differences between groups of data (such as intervention and control groups in a randomized control study).

• Quantitative researchers try to control extraneous variables by conducting their studies in the lab.
• The research aims for objectivity (i.e., without bias) and is separated from the data.
• The design of the study is determined before it begins.
• For the quantitative researcher, the reality is objective, exists separately from the researcher, and can be seen by anyone.
• Research is used to test a theory and ultimately support or reject it.

Limitations of Quantitative Research

• Context: Quantitative experiments do not take place in natural settings. In addition, they do not allow participants to explain their choices or the meaning of the questions they may have for those participants (Carr, 1994).
• Researcher expertise: Poor knowledge of the application of statistical analysis may negatively affect analysis and subsequent interpretation (Black, 1999).
• Variability of data quantity: Large sample sizes are needed for more accurate analysis. Small-scale quantitative studies may be less reliable because of the low quantity of data (Denscombe, 2010). This also affects the ability to generalize study findings to wider populations.
• Confirmation bias: The researcher might miss observing phenomena because of focus on theory or hypothesis testing rather than on the theory of hypothesis generation.

Advantages of Quantitative Research

• Scientific objectivity: Quantitative data can be interpreted with statistical analysis, and since statistics are based on the principles of mathematics, the quantitative approach is viewed as scientifically objective and rational (Carr, 1994; Denscombe, 2010).
• Useful for testing and validating already constructed theories.
• Rapid analysis: Sophisticated software removes much of the need for prolonged data analysis, especially with large volumes of data involved (Antonius, 2003).
• Replication: Quantitative data is based on measured values and can be checked by others because numerical data is less open to ambiguities of interpretation.
• Hypotheses can also be tested because of statistical analysis (Antonius, 2003).

Antonius, R. (2003). Interpreting quantitative data with SPSS . Sage.

Black, T. R. (1999). Doing quantitative research in the social sciences: An integrated approach to research design, measurement and statistics . Sage.

Braun, V. & Clarke, V. (2006). Using thematic analysis in psychology . Qualitative Research in Psychology , 3, 77–101.

Carr, L. T. (1994). The strengths and weaknesses of quantitative and qualitative research : what method for nursing? Journal of advanced nursing, 20(4) , 716-721.

Denscombe, M. (2010). The Good Research Guide: for small-scale social research. McGraw Hill.

Denzin, N., & Lincoln. Y. (1994). Handbook of Qualitative Research. Thousand Oaks, CA, US: Sage Publications Inc.

Glaser, B. G., Strauss, A. L., & Strutzel, E. (1968). The discovery of grounded theory; strategies for qualitative research. Nursing research, 17(4) , 364.

Minichiello, V. (1990). In-Depth Interviewing: Researching People. Longman Cheshire.

Punch, K. (1998). Introduction to Social Research: Quantitative and Qualitative Approaches. London: Sage

Further Information

• Designing qualitative research
• Methods of data collection and analysis
• Introduction to quantitative and qualitative research
• Checklists for improving rigour in qualitative research: a case of the tail wagging the dog?
• Qualitative research in health care: Analysing qualitative data
• Qualitative data analysis: the framework approach
• Using the framework method for the analysis of
• Qualitative data in multi-disciplinary health research
• Content Analysis
• Grounded Theory
• Thematic Analysis

Related Articles

Research Methodology

Qualitative Data Coding

What Is a Focus Group?

Cross-Cultural Research Methodology In Psychology

What Is Internal Validity In Research?

Research Methodology , Statistics

What Is Face Validity In Research? Importance & How To Measure

Criterion Validity: Definition & Examples

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• J Korean Med Sci
• v.37(16); 2022 Apr 25

A Practical Guide to Writing Quantitative and Qualitative Research Questions and Hypotheses in Scholarly Articles

Edward barroga.

1 Department of General Education, Graduate School of Nursing Science, St. Luke’s International University, Tokyo, Japan.

Glafera Janet Matanguihan

2 Department of Biological Sciences, Messiah University, Mechanicsburg, PA, USA.

The development of research questions and the subsequent hypotheses are prerequisites to defining the main research purpose and specific objectives of a study. Consequently, these objectives determine the study design and research outcome. The development of research questions is a process based on knowledge of current trends, cutting-edge studies, and technological advances in the research field. Excellent research questions are focused and require a comprehensive literature search and in-depth understanding of the problem being investigated. Initially, research questions may be written as descriptive questions which could be developed into inferential questions. These questions must be specific and concise to provide a clear foundation for developing hypotheses. Hypotheses are more formal predictions about the research outcomes. These specify the possible results that may or may not be expected regarding the relationship between groups. Thus, research questions and hypotheses clarify the main purpose and specific objectives of the study, which in turn dictate the design of the study, its direction, and outcome. Studies developed from good research questions and hypotheses will have trustworthy outcomes with wide-ranging social and health implications.

INTRODUCTION

Scientific research is usually initiated by posing evidenced-based research questions which are then explicitly restated as hypotheses. 1 , 2 The hypotheses provide directions to guide the study, solutions, explanations, and expected results. 3 , 4 Both research questions and hypotheses are essentially formulated based on conventional theories and real-world processes, which allow the inception of novel studies and the ethical testing of ideas. 5 , 6

It is crucial to have knowledge of both quantitative and qualitative research 2 as both types of research involve writing research questions and hypotheses. 7 However, these crucial elements of research are sometimes overlooked; if not overlooked, then framed without the forethought and meticulous attention it needs. Planning and careful consideration are needed when developing quantitative or qualitative research, particularly when conceptualizing research questions and hypotheses. 4

There is a continuing need to support researchers in the creation of innovative research questions and hypotheses, as well as for journal articles that carefully review these elements. 1 When research questions and hypotheses are not carefully thought of, unethical studies and poor outcomes usually ensue. Carefully formulated research questions and hypotheses define well-founded objectives, which in turn determine the appropriate design, course, and outcome of the study. This article then aims to discuss in detail the various aspects of crafting research questions and hypotheses, with the goal of guiding researchers as they develop their own. Examples from the authors and peer-reviewed scientific articles in the healthcare field are provided to illustrate key points.

DEFINITIONS AND RELATIONSHIP OF RESEARCH QUESTIONS AND HYPOTHESES

A research question is what a study aims to answer after data analysis and interpretation. The answer is written in length in the discussion section of the paper. Thus, the research question gives a preview of the different parts and variables of the study meant to address the problem posed in the research question. 1 An excellent research question clarifies the research writing while facilitating understanding of the research topic, objective, scope, and limitations of the study. 5

On the other hand, a research hypothesis is an educated statement of an expected outcome. This statement is based on background research and current knowledge. 8 , 9 The research hypothesis makes a specific prediction about a new phenomenon 10 or a formal statement on the expected relationship between an independent variable and a dependent variable. 3 , 11 It provides a tentative answer to the research question to be tested or explored. 4

Hypotheses employ reasoning to predict a theory-based outcome. 10 These can also be developed from theories by focusing on components of theories that have not yet been observed. 10 The validity of hypotheses is often based on the testability of the prediction made in a reproducible experiment. 8

Conversely, hypotheses can also be rephrased as research questions. Several hypotheses based on existing theories and knowledge may be needed to answer a research question. Developing ethical research questions and hypotheses creates a research design that has logical relationships among variables. These relationships serve as a solid foundation for the conduct of the study. 4 , 11 Haphazardly constructed research questions can result in poorly formulated hypotheses and improper study designs, leading to unreliable results. Thus, the formulations of relevant research questions and verifiable hypotheses are crucial when beginning research. 12

CHARACTERISTICS OF GOOD RESEARCH QUESTIONS AND HYPOTHESES

Excellent research questions are specific and focused. These integrate collective data and observations to confirm or refute the subsequent hypotheses. Well-constructed hypotheses are based on previous reports and verify the research context. These are realistic, in-depth, sufficiently complex, and reproducible. More importantly, these hypotheses can be addressed and tested. 13

There are several characteristics of well-developed hypotheses. Good hypotheses are 1) empirically testable 7 , 10 , 11 , 13 ; 2) backed by preliminary evidence 9 ; 3) testable by ethical research 7 , 9 ; 4) based on original ideas 9 ; 5) have evidenced-based logical reasoning 10 ; and 6) can be predicted. 11 Good hypotheses can infer ethical and positive implications, indicating the presence of a relationship or effect relevant to the research theme. 7 , 11 These are initially developed from a general theory and branch into specific hypotheses by deductive reasoning. In the absence of a theory to base the hypotheses, inductive reasoning based on specific observations or findings form more general hypotheses. 10

TYPES OF RESEARCH QUESTIONS AND HYPOTHESES

Research questions and hypotheses are developed according to the type of research, which can be broadly classified into quantitative and qualitative research. We provide a summary of the types of research questions and hypotheses under quantitative and qualitative research categories in Table 1 .

Research questions in quantitative research

In quantitative research, research questions inquire about the relationships among variables being investigated and are usually framed at the start of the study. These are precise and typically linked to the subject population, dependent and independent variables, and research design. 1 Research questions may also attempt to describe the behavior of a population in relation to one or more variables, or describe the characteristics of variables to be measured ( descriptive research questions ). 1 , 5 , 14 These questions may also aim to discover differences between groups within the context of an outcome variable ( comparative research questions ), 1 , 5 , 14 or elucidate trends and interactions among variables ( relationship research questions ). 1 , 5 We provide examples of descriptive, comparative, and relationship research questions in quantitative research in Table 2 .

Hypotheses in quantitative research

In quantitative research, hypotheses predict the expected relationships among variables. 15 Relationships among variables that can be predicted include 1) between a single dependent variable and a single independent variable ( simple hypothesis ) or 2) between two or more independent and dependent variables ( complex hypothesis ). 4 , 11 Hypotheses may also specify the expected direction to be followed and imply an intellectual commitment to a particular outcome ( directional hypothesis ) 4 . On the other hand, hypotheses may not predict the exact direction and are used in the absence of a theory, or when findings contradict previous studies ( non-directional hypothesis ). 4 In addition, hypotheses can 1) define interdependency between variables ( associative hypothesis ), 4 2) propose an effect on the dependent variable from manipulation of the independent variable ( causal hypothesis ), 4 3) state a negative relationship between two variables ( null hypothesis ), 4 , 11 , 15 4) replace the working hypothesis if rejected ( alternative hypothesis ), 15 explain the relationship of phenomena to possibly generate a theory ( working hypothesis ), 11 5) involve quantifiable variables that can be tested statistically ( statistical hypothesis ), 11 6) or express a relationship whose interlinks can be verified logically ( logical hypothesis ). 11 We provide examples of simple, complex, directional, non-directional, associative, causal, null, alternative, working, statistical, and logical hypotheses in quantitative research, as well as the definition of quantitative hypothesis-testing research in Table 3 .

Research questions in qualitative research

Unlike research questions in quantitative research, research questions in qualitative research are usually continuously reviewed and reformulated. The central question and associated subquestions are stated more than the hypotheses. 15 The central question broadly explores a complex set of factors surrounding the central phenomenon, aiming to present the varied perspectives of participants. 15

There are varied goals for which qualitative research questions are developed. These questions can function in several ways, such as to 1) identify and describe existing conditions ( contextual research question s); 2) describe a phenomenon ( descriptive research questions ); 3) assess the effectiveness of existing methods, protocols, theories, or procedures ( evaluation research questions ); 4) examine a phenomenon or analyze the reasons or relationships between subjects or phenomena ( explanatory research questions ); or 5) focus on unknown aspects of a particular topic ( exploratory research questions ). 5 In addition, some qualitative research questions provide new ideas for the development of theories and actions ( generative research questions ) or advance specific ideologies of a position ( ideological research questions ). 1 Other qualitative research questions may build on a body of existing literature and become working guidelines ( ethnographic research questions ). Research questions may also be broadly stated without specific reference to the existing literature or a typology of questions ( phenomenological research questions ), may be directed towards generating a theory of some process ( grounded theory questions ), or may address a description of the case and the emerging themes ( qualitative case study questions ). 15 We provide examples of contextual, descriptive, evaluation, explanatory, exploratory, generative, ideological, ethnographic, phenomenological, grounded theory, and qualitative case study research questions in qualitative research in Table 4 , and the definition of qualitative hypothesis-generating research in Table 5 .

Qualitative studies usually pose at least one central research question and several subquestions starting with How or What . These research questions use exploratory verbs such as explore or describe . These also focus on one central phenomenon of interest, and may mention the participants and research site. 15

Hypotheses in qualitative research

Hypotheses in qualitative research are stated in the form of a clear statement concerning the problem to be investigated. Unlike in quantitative research where hypotheses are usually developed to be tested, qualitative research can lead to both hypothesis-testing and hypothesis-generating outcomes. 2 When studies require both quantitative and qualitative research questions, this suggests an integrative process between both research methods wherein a single mixed-methods research question can be developed. 1

FRAMEWORKS FOR DEVELOPING RESEARCH QUESTIONS AND HYPOTHESES

Research questions followed by hypotheses should be developed before the start of the study. 1 , 12 , 14 It is crucial to develop feasible research questions on a topic that is interesting to both the researcher and the scientific community. This can be achieved by a meticulous review of previous and current studies to establish a novel topic. Specific areas are subsequently focused on to generate ethical research questions. The relevance of the research questions is evaluated in terms of clarity of the resulting data, specificity of the methodology, objectivity of the outcome, depth of the research, and impact of the study. 1 , 5 These aspects constitute the FINER criteria (i.e., Feasible, Interesting, Novel, Ethical, and Relevant). 1 Clarity and effectiveness are achieved if research questions meet the FINER criteria. In addition to the FINER criteria, Ratan et al. described focus, complexity, novelty, feasibility, and measurability for evaluating the effectiveness of research questions. 14

The PICOT and PEO frameworks are also used when developing research questions. 1 The following elements are addressed in these frameworks, PICOT: P-population/patients/problem, I-intervention or indicator being studied, C-comparison group, O-outcome of interest, and T-timeframe of the study; PEO: P-population being studied, E-exposure to preexisting conditions, and O-outcome of interest. 1 Research questions are also considered good if these meet the “FINERMAPS” framework: Feasible, Interesting, Novel, Ethical, Relevant, Manageable, Appropriate, Potential value/publishable, and Systematic. 14

As we indicated earlier, research questions and hypotheses that are not carefully formulated result in unethical studies or poor outcomes. To illustrate this, we provide some examples of ambiguous research question and hypotheses that result in unclear and weak research objectives in quantitative research ( Table 6 ) 16 and qualitative research ( Table 7 ) 17 , and how to transform these ambiguous research question(s) and hypothesis(es) into clear and good statements.

a These statements were composed for comparison and illustrative purposes only.

b These statements are direct quotes from Higashihara and Horiuchi. 16

a This statement is a direct quote from Shimoda et al. 17

The other statements were composed for comparison and illustrative purposes only.

CONSTRUCTING RESEARCH QUESTIONS AND HYPOTHESES

To construct effective research questions and hypotheses, it is very important to 1) clarify the background and 2) identify the research problem at the outset of the research, within a specific timeframe. 9 Then, 3) review or conduct preliminary research to collect all available knowledge about the possible research questions by studying theories and previous studies. 18 Afterwards, 4) construct research questions to investigate the research problem. Identify variables to be accessed from the research questions 4 and make operational definitions of constructs from the research problem and questions. Thereafter, 5) construct specific deductive or inductive predictions in the form of hypotheses. 4 Finally, 6) state the study aims . This general flow for constructing effective research questions and hypotheses prior to conducting research is shown in Fig. 1 .

Research questions are used more frequently in qualitative research than objectives or hypotheses. 3 These questions seek to discover, understand, explore or describe experiences by asking “What” or “How.” The questions are open-ended to elicit a description rather than to relate variables or compare groups. The questions are continually reviewed, reformulated, and changed during the qualitative study. 3 Research questions are also used more frequently in survey projects than hypotheses in experiments in quantitative research to compare variables and their relationships.

Hypotheses are constructed based on the variables identified and as an if-then statement, following the template, ‘If a specific action is taken, then a certain outcome is expected.’ At this stage, some ideas regarding expectations from the research to be conducted must be drawn. 18 Then, the variables to be manipulated (independent) and influenced (dependent) are defined. 4 Thereafter, the hypothesis is stated and refined, and reproducible data tailored to the hypothesis are identified, collected, and analyzed. 4 The hypotheses must be testable and specific, 18 and should describe the variables and their relationships, the specific group being studied, and the predicted research outcome. 18 Hypotheses construction involves a testable proposition to be deduced from theory, and independent and dependent variables to be separated and measured separately. 3 Therefore, good hypotheses must be based on good research questions constructed at the start of a study or trial. 12

In summary, research questions are constructed after establishing the background of the study. Hypotheses are then developed based on the research questions. Thus, it is crucial to have excellent research questions to generate superior hypotheses. In turn, these would determine the research objectives and the design of the study, and ultimately, the outcome of the research. 12 Algorithms for building research questions and hypotheses are shown in Fig. 2 for quantitative research and in Fig. 3 for qualitative research.

EXAMPLES OF RESEARCH QUESTIONS FROM PUBLISHED ARTICLES

• EXAMPLE 1. Descriptive research question (quantitative research)
• - Presents research variables to be assessed (distinct phenotypes and subphenotypes)
• “BACKGROUND: Since COVID-19 was identified, its clinical and biological heterogeneity has been recognized. Identifying COVID-19 phenotypes might help guide basic, clinical, and translational research efforts.
• RESEARCH QUESTION: Does the clinical spectrum of patients with COVID-19 contain distinct phenotypes and subphenotypes? ” 19
• EXAMPLE 2. Relationship research question (quantitative research)
• - Shows interactions between dependent variable (static postural control) and independent variable (peripheral visual field loss)
• “Background: Integration of visual, vestibular, and proprioceptive sensations contributes to postural control. People with peripheral visual field loss have serious postural instability. However, the directional specificity of postural stability and sensory reweighting caused by gradual peripheral visual field loss remain unclear.
• Research question: What are the effects of peripheral visual field loss on static postural control ?” 20
• EXAMPLE 3. Comparative research question (quantitative research)
• - Clarifies the difference among groups with an outcome variable (patients enrolled in COMPERA with moderate PH or severe PH in COPD) and another group without the outcome variable (patients with idiopathic pulmonary arterial hypertension (IPAH))
• “BACKGROUND: Pulmonary hypertension (PH) in COPD is a poorly investigated clinical condition.
• RESEARCH QUESTION: Which factors determine the outcome of PH in COPD?
• STUDY DESIGN AND METHODS: We analyzed the characteristics and outcome of patients enrolled in the Comparative, Prospective Registry of Newly Initiated Therapies for Pulmonary Hypertension (COMPERA) with moderate or severe PH in COPD as defined during the 6th PH World Symposium who received medical therapy for PH and compared them with patients with idiopathic pulmonary arterial hypertension (IPAH) .” 21
• EXAMPLE 4. Exploratory research question (qualitative research)
• - Explores areas that have not been fully investigated (perspectives of families and children who receive care in clinic-based child obesity treatment) to have a deeper understanding of the research problem
• “Problem: Interventions for children with obesity lead to only modest improvements in BMI and long-term outcomes, and data are limited on the perspectives of families of children with obesity in clinic-based treatment. This scoping review seeks to answer the question: What is known about the perspectives of families and children who receive care in clinic-based child obesity treatment? This review aims to explore the scope of perspectives reported by families of children with obesity who have received individualized outpatient clinic-based obesity treatment.” 22
• EXAMPLE 5. Relationship research question (quantitative research)
• - Defines interactions between dependent variable (use of ankle strategies) and independent variable (changes in muscle tone)
• “Background: To maintain an upright standing posture against external disturbances, the human body mainly employs two types of postural control strategies: “ankle strategy” and “hip strategy.” While it has been reported that the magnitude of the disturbance alters the use of postural control strategies, it has not been elucidated how the level of muscle tone, one of the crucial parameters of bodily function, determines the use of each strategy. We have previously confirmed using forward dynamics simulations of human musculoskeletal models that an increased muscle tone promotes the use of ankle strategies. The objective of the present study was to experimentally evaluate a hypothesis: an increased muscle tone promotes the use of ankle strategies. Research question: Do changes in the muscle tone affect the use of ankle strategies ?” 23

EXAMPLES OF HYPOTHESES IN PUBLISHED ARTICLES

• EXAMPLE 1. Working hypothesis (quantitative research)
• - A hypothesis that is initially accepted for further research to produce a feasible theory
• “As fever may have benefit in shortening the duration of viral illness, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response when taken during the early stages of COVID-19 illness .” 24
• “In conclusion, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response . The difference in perceived safety of these agents in COVID-19 illness could be related to the more potent efficacy to reduce fever with ibuprofen compared to acetaminophen. Compelling data on the benefit of fever warrant further research and review to determine when to treat or withhold ibuprofen for early stage fever for COVID-19 and other related viral illnesses .” 24
• EXAMPLE 2. Exploratory hypothesis (qualitative research)
• - Explores particular areas deeper to clarify subjective experience and develop a formal hypothesis potentially testable in a future quantitative approach
• “We hypothesized that when thinking about a past experience of help-seeking, a self distancing prompt would cause increased help-seeking intentions and more favorable help-seeking outcome expectations .” 25
• “Conclusion
• Although a priori hypotheses were not supported, further research is warranted as results indicate the potential for using self-distancing approaches to increasing help-seeking among some people with depressive symptomatology.” 25
• EXAMPLE 3. Hypothesis-generating research to establish a framework for hypothesis testing (qualitative research)
• “We hypothesize that compassionate care is beneficial for patients (better outcomes), healthcare systems and payers (lower costs), and healthcare providers (lower burnout). ” 26
• Compassionomics is the branch of knowledge and scientific study of the effects of compassionate healthcare. Our main hypotheses are that compassionate healthcare is beneficial for (1) patients, by improving clinical outcomes, (2) healthcare systems and payers, by supporting financial sustainability, and (3) HCPs, by lowering burnout and promoting resilience and well-being. The purpose of this paper is to establish a scientific framework for testing the hypotheses above . If these hypotheses are confirmed through rigorous research, compassionomics will belong in the science of evidence-based medicine, with major implications for all healthcare domains.” 26
• EXAMPLE 4. Statistical hypothesis (quantitative research)
• - An assumption is made about the relationship among several population characteristics ( gender differences in sociodemographic and clinical characteristics of adults with ADHD ). Validity is tested by statistical experiment or analysis ( chi-square test, Students t-test, and logistic regression analysis)
• “Our research investigated gender differences in sociodemographic and clinical characteristics of adults with ADHD in a Japanese clinical sample. Due to unique Japanese cultural ideals and expectations of women's behavior that are in opposition to ADHD symptoms, we hypothesized that women with ADHD experience more difficulties and present more dysfunctions than men . We tested the following hypotheses: first, women with ADHD have more comorbidities than men with ADHD; second, women with ADHD experience more social hardships than men, such as having less full-time employment and being more likely to be divorced.” 27
• “Statistical Analysis
• ( text omitted ) Between-gender comparisons were made using the chi-squared test for categorical variables and Students t-test for continuous variables…( text omitted ). A logistic regression analysis was performed for employment status, marital status, and comorbidity to evaluate the independent effects of gender on these dependent variables.” 27

EXAMPLES OF HYPOTHESIS AS WRITTEN IN PUBLISHED ARTICLES IN RELATION TO OTHER PARTS

• EXAMPLE 1. Background, hypotheses, and aims are provided
• “Pregnant women need skilled care during pregnancy and childbirth, but that skilled care is often delayed in some countries …( text omitted ). The focused antenatal care (FANC) model of WHO recommends that nurses provide information or counseling to all pregnant women …( text omitted ). Job aids are visual support materials that provide the right kind of information using graphics and words in a simple and yet effective manner. When nurses are not highly trained or have many work details to attend to, these job aids can serve as a content reminder for the nurses and can be used for educating their patients (Jennings, Yebadokpo, Affo, & Agbogbe, 2010) ( text omitted ). Importantly, additional evidence is needed to confirm how job aids can further improve the quality of ANC counseling by health workers in maternal care …( text omitted )” 28
• “ This has led us to hypothesize that the quality of ANC counseling would be better if supported by job aids. Consequently, a better quality of ANC counseling is expected to produce higher levels of awareness concerning the danger signs of pregnancy and a more favorable impression of the caring behavior of nurses .” 28
• “This study aimed to examine the differences in the responses of pregnant women to a job aid-supported intervention during ANC visit in terms of 1) their understanding of the danger signs of pregnancy and 2) their impression of the caring behaviors of nurses to pregnant women in rural Tanzania.” 28
• EXAMPLE 2. Background, hypotheses, and aims are provided
• “We conducted a two-arm randomized controlled trial (RCT) to evaluate and compare changes in salivary cortisol and oxytocin levels of first-time pregnant women between experimental and control groups. The women in the experimental group touched and held an infant for 30 min (experimental intervention protocol), whereas those in the control group watched a DVD movie of an infant (control intervention protocol). The primary outcome was salivary cortisol level and the secondary outcome was salivary oxytocin level.” 29
• “ We hypothesize that at 30 min after touching and holding an infant, the salivary cortisol level will significantly decrease and the salivary oxytocin level will increase in the experimental group compared with the control group .” 29
• EXAMPLE 3. Background, aim, and hypothesis are provided
• “In countries where the maternal mortality ratio remains high, antenatal education to increase Birth Preparedness and Complication Readiness (BPCR) is considered one of the top priorities [1]. BPCR includes birth plans during the antenatal period, such as the birthplace, birth attendant, transportation, health facility for complications, expenses, and birth materials, as well as family coordination to achieve such birth plans. In Tanzania, although increasing, only about half of all pregnant women attend an antenatal clinic more than four times [4]. Moreover, the information provided during antenatal care (ANC) is insufficient. In the resource-poor settings, antenatal group education is a potential approach because of the limited time for individual counseling at antenatal clinics.” 30
• “This study aimed to evaluate an antenatal group education program among pregnant women and their families with respect to birth-preparedness and maternal and infant outcomes in rural villages of Tanzania.” 30
• “ The study hypothesis was if Tanzanian pregnant women and their families received a family-oriented antenatal group education, they would (1) have a higher level of BPCR, (2) attend antenatal clinic four or more times, (3) give birth in a health facility, (4) have less complications of women at birth, and (5) have less complications and deaths of infants than those who did not receive the education .” 30

Research questions and hypotheses are crucial components to any type of research, whether quantitative or qualitative. These questions should be developed at the very beginning of the study. Excellent research questions lead to superior hypotheses, which, like a compass, set the direction of research, and can often determine the successful conduct of the study. Many research studies have floundered because the development of research questions and subsequent hypotheses was not given the thought and meticulous attention needed. The development of research questions and hypotheses is an iterative process based on extensive knowledge of the literature and insightful grasp of the knowledge gap. Focused, concise, and specific research questions provide a strong foundation for constructing hypotheses which serve as formal predictions about the research outcomes. Research questions and hypotheses are crucial elements of research that should not be overlooked. They should be carefully thought of and constructed when planning research. This avoids unethical studies and poor outcomes by defining well-founded objectives that determine the design, course, and outcome of the study.

Disclosure: The authors have no potential conflicts of interest to disclose.

Author Contributions:

• Conceptualization: Barroga E, Matanguihan GJ.
• Methodology: Barroga E, Matanguihan GJ.
• Writing - original draft: Barroga E, Matanguihan GJ.
• Writing - review & editing: Barroga E, Matanguihan GJ.

What is quantitative research?

Last updated

20 February 2023

Reviewed by

Quantitative methods and data are used by some business owners, for example, to evaluate their business, diagnose issues, and identify opportunities.

Quantitative research is used throughout the natural and social sciences, including economics, sociology, chemistry, biology, psychology, and marketing. 

Researchers use quantitative research to get objective, robust, and representative answers from individuals. Researchers gather quantitative data from sample groups of people and generalize it to a larger population. This is to, in some instances, explain a given phenomenon and answer questions about the population, such as product preferences, political persuasion, or demography.

For example, a hotel owner in the US can conduct quantitative research, perhaps via a questionnaire, on a small sample of their customers to understand their opinions about their products and services. The analyzed quantitative data from this questionnaire can be generalized to the larger population of their customers. The hotel can use these opinions to maintain or improve its service provision.

Make research less tedious

Dovetail streamlines research to help you uncover and share actionable insights

• Quantitative research methods

Researchers employ various quantitative research methods to determine certain phenomena.

Observation

This method involves gathering information by simply observing behaviors or counting subjects relevant to a study. For example, a researcher could sit in a classroom and observe students when a teacher is teaching, recording those who are and are not paying attention.

Survey is one of the most popular and well-known quantitative methods. It involves asking individuals questions either physically or, most typically nowadays, online. These questions are usually in the form of a questionnaire that individuals can respond to, using a mix of single, multichoice, ranking, rating, and occasionally open-ended questions .

For example, a researcher could administer a questionnaire to first-year international college students about their college experiences using various question formats.

Experimental

This scientific approach is conducted with two sets of data, i.e., independent and dependent variables . Usually, researchers approach experimental studies with specific hypotheses to test. They may use two groups of participants: one who would receive the “treatment” and one who would not.

For example, a researcher might wish to test a short-term mindfulness treatment for individuals with depression. In this case, the independent or manipulated variable would be the mindfulness treatment group. One group would receive the mindfulness treatment, and another would not. In this case, the “experiment” would be to see if the individuals who received the mindfulness treatment experienced fewer depressive symptoms than those who did not.

• What is quantitative analysis?

Quantitative analysis is a process that involves manipulating and evaluating collected, measurable data. The goal is to understand the behavior of a given phenomenon and answer a research question (and, in a scientific setting, prove or disprove a hypothesis).

A business owner, for example, may analyze quantitative sales data and consumer quantitative data using a questionnaire. By doing this, the owner can figure out if their business is doing well or if they need to make changes to improve.

If you are a business owner, you could consider quantitative analysis to better understand your business's past, present, and potential future.

• What do quantitative analysts do?

A quantitative analyst is an expert in designing, developing, and implementing algorithms to answer research questions. They use quantitative research methods to help companies make appropriate business and financial decisions.

The primary responsibility of a quantitative analyst is to apply quantitative methods to identify opportunities and evaluate risks.

Quantitative analysts are important to staff in any business because:

They manage portfolio risks

They test a new trading strategy

They program and implement a new trading strategy

They improve signals used to evaluate trade ideas

• Understanding quantitative analysis

Analysts use quantitative analysis to analyze a business's past, present, and future. You can also use quantitative analysis to determine the progress of your business.

State governments also use quantitative analysis to make monetary and other economic policy decisions. It is used in the financial services industry to analyze investment opportunities. For example, a business owner can use quantitative analysis to determine when to sell or purchase securities based on macroeconomic conditions.

Quantitative analysis versus qualitative analysis

If you are pursuing a career in research or business analysis, it is essential to understand the two concepts—quantitative and qualitative analysis.

Quantitative analysis, at a very basic level, relies on using numbers and discrete values collected from the research. In contrast, qualitative analysis relies on content (e.g., language or text data) that either can’t be expressed in numbers or doesn’t have sufficient scale to be counted or coded.

A business owner wanting to better understand their business might use a representative quantitative sample of customers to generate insight by completing a questionnaire. A website owner could analyze quantitative metrics associated with their website to understand which aspects of the site are working well and which elements need to be optimized. These include the length of visit, number of links clicked, and areas of the site visited.

Various measures could be correlated by sales (or other outcomes) to determine the UX and marketing strategy linked to the site.

Businesses might use qualitative analysis to get a greater depth of understanding or look at the ‘why’ behind the ‘what.’ For example, they might ask customers, who gave a low quantitative score for a provided product, why they gave that rating and how they might improve the said product.

• Advantages of quantitative research

Quantitative research, done right, can help drive a business's success and generate a general understanding of key business metrics and customer behavior, wants, and needs. Quantitative research should be considered for the following reasons: 

It is efficient and fast

An experienced quantitative researcher can complete the reporting and analysis phase efficiently and quickly with a defined reporting structure and outputs while taking some time to define and structure questions (versus unstructured qualitative data ).

It is objective and requires limited interpretation

Quantitative research relies on standardized statistical processes and rules to answer research questions. If performed correctly, data generated from small sample groups can be extrapolated to represent the views of larger populations.

It is focused

Owing to its structure, the goals of quantitative research are determined at the beginning of the study, forcing researchers to clearly understand and define the objectives of their studies.

• Disadvantages of quantitative research

It’s only appropriate in certain cases

This method is only relevant when data can be captured and reflected in numbers. It cannot be used in situations where data is non-numerical, e.g., long-form verbal or textual responses that are not easily coded down into numerical responses.

It’s challenging to analyze the data collected

When quantitative research is collected, it can be difficult to make sense of the numbers without knowing statistical methods. Knowledge of research methods and data analytic techniques is essential for drawing conclusions about the study questions. These programs and methods take time to learn and can be time-consuming and complicated.

• What are the limitations of quantitative research?

Requires vast resources

This method requires a considerable investment of time, energy, and finance. One needs to prepare and structure questions, test their understanding and relevance, and determine how to distribute them to the respondents. Some respondents may expect payment or incentives to respond to the questions (this may be in the form of entry into a prize draw.)

Requires many respondents

Quantitative research generally requires access to (relative to other methods) large samples to ensure inferences made from the research are robust and reliable. Finding this audience, especially where the incidence is low can be both time-consuming and expensive.

Research is limited in its scope

What quantitative research can explore is limited due to the need to agree on the specific questions to be asked and analyzed versus qualitative research. The latter doesn’t define specific numbers and forms of questions in advance.

Why is it called quantitative research?

It is called quantitative research because it involves the use of ‘quantities’ of things—things that can be expressed in numbers or measured.

What does quantitative research answer?

Quantitative research answers questions measuring value or size, which can be expressed in numbers. It answers questions such as how many, how much, and how often.

For example, you can study the number of individuals who wish to study at American universities and their traits. Questions can include how many come from low, medium, or high socio-economic brackets, how many want to study law versus humanities, and what proportion feel excited versus anxious about the prospect of undertaking higher education.

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 11 January 2024

Last updated: 15 January 2024

Last updated: 17 January 2024

Last updated: 25 November 2023

Last updated: 12 May 2023

Last updated: 30 April 2024

Last updated: 13 May 2024

Latest articles

Related topics, .css-je19u9{-webkit-align-items:flex-end;-webkit-box-align:flex-end;-ms-flex-align:flex-end;align-items:flex-end;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;-webkit-box-flex-wrap:wrap;-webkit-flex-wrap:wrap;-ms-flex-wrap:wrap;flex-wrap:wrap;-webkit-box-pack:center;-ms-flex-pack:center;-webkit-justify-content:center;justify-content:center;row-gap:0;text-align:center;max-width:671px;}@media (max-width: 1079px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}}@media (max-width: 799px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}} decide what to .css-1kiodld{max-height:56px;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}@media (max-width: 1079px){.css-1kiodld{display:none;}} build next, decide what to build next.

Users report unexpectedly high data usage, especially during streaming sessions.

Users find it hard to navigate from the home page to relevant playlists in the app.

It would be great to have a sleep timer feature, especially for bedtime listening.

I need better filters to find the songs or artists I’m looking for.

Log in or sign up

Get started for free

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• Quantitative Methods
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

Quantitative methods emphasize objective measurements and the statistical, mathematical, or numerical analysis of data collected through polls, questionnaires, and surveys, or by manipulating pre-existing statistical data using computational techniques . Quantitative research focuses on gathering numerical data and generalizing it across groups of people or to explain a particular phenomenon.

Babbie, Earl R. The Practice of Social Research . 12th ed. Belmont, CA: Wadsworth Cengage, 2010; Muijs, Daniel. Doing Quantitative Research in Education with SPSS . 2nd edition. London: SAGE Publications, 2010.

Need Help Locating Statistics?

Resources for locating data and statistics can be found here:

Statistics & Data Research Guide

Characteristics of Quantitative Research

Your goal in conducting quantitative research study is to determine the relationship between one thing [an independent variable] and another [a dependent or outcome variable] within a population. Quantitative research designs are either descriptive [subjects usually measured once] or experimental [subjects measured before and after a treatment]. A descriptive study establishes only associations between variables; an experimental study establishes causality.

Quantitative research deals in numbers, logic, and an objective stance. Quantitative research focuses on numeric and unchanging data and detailed, convergent reasoning rather than divergent reasoning [i.e., the generation of a variety of ideas about a research problem in a spontaneous, free-flowing manner].

Its main characteristics are :

• The data is usually gathered using structured research instruments.
• The results are based on larger sample sizes that are representative of the population.
• The research study can usually be replicated or repeated, given its high reliability.
• Researcher has a clearly defined research question to which objective answers are sought.
• All aspects of the study are carefully designed before data is collected.
• Data are in the form of numbers and statistics, often arranged in tables, charts, figures, or other non-textual forms.
• Project can be used to generalize concepts more widely, predict future results, or investigate causal relationships.
• Researcher uses tools, such as questionnaires or computer software, to collect numerical data.

The overarching aim of a quantitative research study is to classify features, count them, and construct statistical models in an attempt to explain what is observed.

  Things to keep in mind when reporting the results of a study using quantitative methods :

• Explain the data collected and their statistical treatment as well as all relevant results in relation to the research problem you are investigating. Interpretation of results is not appropriate in this section.
• Report unanticipated events that occurred during your data collection. Explain how the actual analysis differs from the planned analysis. Explain your handling of missing data and why any missing data does not undermine the validity of your analysis.
• Explain the techniques you used to "clean" your data set.
• Choose a minimally sufficient statistical procedure ; provide a rationale for its use and a reference for it. Specify any computer programs used.
• Describe the assumptions for each procedure and the steps you took to ensure that they were not violated.
• When using inferential statistics , provide the descriptive statistics, confidence intervals, and sample sizes for each variable as well as the value of the test statistic, its direction, the degrees of freedom, and the significance level [report the actual p value].
• Avoid inferring causality , particularly in nonrandomized designs or without further experimentation.
• Use tables to provide exact values ; use figures to convey global effects. Keep figures small in size; include graphic representations of confidence intervals whenever possible.
• Always tell the reader what to look for in tables and figures .

NOTE:   When using pre-existing statistical data gathered and made available by anyone other than yourself [e.g., government agency], you still must report on the methods that were used to gather the data and describe any missing data that exists and, if there is any, provide a clear explanation why the missing data does not undermine the validity of your final analysis.

Babbie, Earl R. The Practice of Social Research . 12th ed. Belmont, CA: Wadsworth Cengage, 2010; Brians, Craig Leonard et al. Empirical Political Analysis: Quantitative and Qualitative Research Methods . 8th ed. Boston, MA: Longman, 2011; McNabb, David E. Research Methods in Public Administration and Nonprofit Management: Quantitative and Qualitative Approaches . 2nd ed. Armonk, NY: M.E. Sharpe, 2008; Quantitative Research Methods. Writing@CSU. Colorado State University; Singh, Kultar. Quantitative Social Research Methods . Los Angeles, CA: Sage, 2007.

Basic Research Design for Quantitative Studies

Before designing a quantitative research study, you must decide whether it will be descriptive or experimental because this will dictate how you gather, analyze, and interpret the results. A descriptive study is governed by the following rules: subjects are generally measured once; the intention is to only establish associations between variables; and, the study may include a sample population of hundreds or thousands of subjects to ensure that a valid estimate of a generalized relationship between variables has been obtained. An experimental design includes subjects measured before and after a particular treatment, the sample population may be very small and purposefully chosen, and it is intended to establish causality between variables. Introduction The introduction to a quantitative study is usually written in the present tense and from the third person point of view. It covers the following information:

• Identifies the research problem -- as with any academic study, you must state clearly and concisely the research problem being investigated.
• Reviews the literature -- review scholarship on the topic, synthesizing key themes and, if necessary, noting studies that have used similar methods of inquiry and analysis. Note where key gaps exist and how your study helps to fill these gaps or clarifies existing knowledge.
• Describes the theoretical framework -- provide an outline of the theory or hypothesis underpinning your study. If necessary, define unfamiliar or complex terms, concepts, or ideas and provide the appropriate background information to place the research problem in proper context [e.g., historical, cultural, economic, etc.].

Methodology The methods section of a quantitative study should describe how each objective of your study will be achieved. Be sure to provide enough detail to enable the reader can make an informed assessment of the methods being used to obtain results associated with the research problem. The methods section should be presented in the past tense.

• Study population and sampling -- where did the data come from; how robust is it; note where gaps exist or what was excluded. Note the procedures used for their selection;
• Data collection – describe the tools and methods used to collect information and identify the variables being measured; describe the methods used to obtain the data; and, note if the data was pre-existing [i.e., government data] or you gathered it yourself. If you gathered it yourself, describe what type of instrument you used and why. Note that no data set is perfect--describe any limitations in methods of gathering data.
• Data analysis -- describe the procedures for processing and analyzing the data. If appropriate, describe the specific instruments of analysis used to study each research objective, including mathematical techniques and the type of computer software used to manipulate the data.

Results The finding of your study should be written objectively and in a succinct and precise format. In quantitative studies, it is common to use graphs, tables, charts, and other non-textual elements to help the reader understand the data. Make sure that non-textual elements do not stand in isolation from the text but are being used to supplement the overall description of the results and to help clarify key points being made. Further information about how to effectively present data using charts and graphs can be found here .

• Statistical analysis -- how did you analyze the data? What were the key findings from the data? The findings should be present in a logical, sequential order. Describe but do not interpret these trends or negative results; save that for the discussion section. The results should be presented in the past tense.

Discussion Discussions should be analytic, logical, and comprehensive. The discussion should meld together your findings in relation to those identified in the literature review, and placed within the context of the theoretical framework underpinning the study. The discussion should be presented in the present tense.

• Interpretation of results -- reiterate the research problem being investigated and compare and contrast the findings with the research questions underlying the study. Did they affirm predicted outcomes or did the data refute it?
• Description of trends, comparison of groups, or relationships among variables -- describe any trends that emerged from your analysis and explain all unanticipated and statistical insignificant findings.
• Discussion of implications – what is the meaning of your results? Highlight key findings based on the overall results and note findings that you believe are important. How have the results helped fill gaps in understanding the research problem?
• Limitations -- describe any limitations or unavoidable bias in your study and, if necessary, note why these limitations did not inhibit effective interpretation of the results.

Conclusion End your study by to summarizing the topic and provide a final comment and assessment of the study.

• Summary of findings – synthesize the answers to your research questions. Do not report any statistical data here; just provide a narrative summary of the key findings and describe what was learned that you did not know before conducting the study.
• Recommendations – if appropriate to the aim of the assignment, tie key findings with policy recommendations or actions to be taken in practice.
• Future research – note the need for future research linked to your study’s limitations or to any remaining gaps in the literature that were not addressed in your study.

Black, Thomas R. Doing Quantitative Research in the Social Sciences: An Integrated Approach to Research Design, Measurement and Statistics . London: Sage, 1999; Gay,L. R. and Peter Airasain. Educational Research: Competencies for Analysis and Applications . 7th edition. Upper Saddle River, NJ: Merril Prentice Hall, 2003; Hector, Anestine. An Overview of Quantitative Research in Composition and TESOL . Department of English, Indiana University of Pennsylvania; Hopkins, Will G. “Quantitative Research Design.” Sportscience 4, 1 (2000); "A Strategy for Writing Up Research Results. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper." Department of Biology. Bates College; Nenty, H. Johnson. "Writing a Quantitative Research Thesis." International Journal of Educational Science 1 (2009): 19-32; Ouyang, Ronghua (John). Basic Inquiry of Quantitative Research . Kennesaw State University.

Strengths of Using Quantitative Methods

Quantitative researchers try to recognize and isolate specific variables contained within the study framework, seek correlation, relationships and causality, and attempt to control the environment in which the data is collected to avoid the risk of variables, other than the one being studied, accounting for the relationships identified.

Among the specific strengths of using quantitative methods to study social science research problems:

• Allows for a broader study, involving a greater number of subjects, and enhancing the generalization of the results;
• Allows for greater objectivity and accuracy of results. Generally, quantitative methods are designed to provide summaries of data that support generalizations about the phenomenon under study. In order to accomplish this, quantitative research usually involves few variables and many cases, and employs prescribed procedures to ensure validity and reliability;
• Applying well established standards means that the research can be replicated, and then analyzed and compared with similar studies;
• You can summarize vast sources of information and make comparisons across categories and over time; and,
• Personal bias can be avoided by keeping a 'distance' from participating subjects and using accepted computational techniques .

Babbie, Earl R. The Practice of Social Research . 12th ed. Belmont, CA: Wadsworth Cengage, 2010; Brians, Craig Leonard et al. Empirical Political Analysis: Quantitative and Qualitative Research Methods . 8th ed. Boston, MA: Longman, 2011; McNabb, David E. Research Methods in Public Administration and Nonprofit Management: Quantitative and Qualitative Approaches . 2nd ed. Armonk, NY: M.E. Sharpe, 2008; Singh, Kultar. Quantitative Social Research Methods . Los Angeles, CA: Sage, 2007.

Limitations of Using Quantitative Methods

Quantitative methods presume to have an objective approach to studying research problems, where data is controlled and measured, to address the accumulation of facts, and to determine the causes of behavior. As a consequence, the results of quantitative research may be statistically significant but are often humanly insignificant.

Some specific limitations associated with using quantitative methods to study research problems in the social sciences include:

• Quantitative data is more efficient and able to test hypotheses, but may miss contextual detail;
• Uses a static and rigid approach and so employs an inflexible process of discovery;
• The development of standard questions by researchers can lead to "structural bias" and false representation, where the data actually reflects the view of the researcher instead of the participating subject;
• Results provide less detail on behavior, attitudes, and motivation;
• Researcher may collect a much narrower and sometimes superficial dataset;
• Results are limited as they provide numerical descriptions rather than detailed narrative and generally provide less elaborate accounts of human perception;
• The research is often carried out in an unnatural, artificial environment so that a level of control can be applied to the exercise. This level of control might not normally be in place in the real world thus yielding "laboratory results" as opposed to "real world results"; and,
• Preset answers will not necessarily reflect how people really feel about a subject and, in some cases, might just be the closest match to the preconceived hypothesis.

Research Tip

Finding Examples of How to Apply Different Types of Research Methods

SAGE publications is a major publisher of studies about how to design and conduct research in the social and behavioral sciences. Their SAGE Research Methods Online and Cases database includes contents from books, articles, encyclopedias, handbooks, and videos covering social science research design and methods including the complete Little Green Book Series of Quantitative Applications in the Social Sciences and the Little Blue Book Series of Qualitative Research techniques. The database also includes case studies outlining the research methods used in real research projects. This is an excellent source for finding definitions of key terms and descriptions of research design and practice, techniques of data gathering, analysis, and reporting, and information about theories of research [e.g., grounded theory]. The database covers both qualitative and quantitative research methods as well as mixed methods approaches to conducting research.

SAGE Research Methods Online and Cases

• << Previous: Qualitative Methods
• Next: Insiderness >>
• Last Updated: May 22, 2024 12:03 PM
• URL: https://libguides.usc.edu/writingguide

Quantitative and Qualitative Research

• I NEED TO . . .

What is Quantitative Research?

• What is Qualitative Research?
• Quantitative vs Qualitative
• Step 1: Accessing CINAHL
• Step 2: Create a Keyword Search
• Step 3: Create a Subject Heading Search
• Step 4: Repeat Steps 1-3 for Second Concept
• Step 5: Repeat Steps 1-3 for Quantitative Terms
• Step 6: Combining All Searches
• Step 7: Adding Limiters
• Step 8: Save Your Search!
• What Kind of Article is This?
• More Research Help This link opens in a new window

Quantitative methodology is the dominant research framework in the social sciences. It refers to a set of strategies, techniques and assumptions used to study psychological, social and economic processes through the exploration of numeric patterns . Quantitative research gathers a range of numeric data. Some of the numeric data is intrinsically quantitative (e.g. personal income), while in other cases the numeric structure is  imposed (e.g. ‘On a scale from 1 to 10, how depressed did you feel last week?’). The collection of quantitative information allows researchers to conduct simple to extremely sophisticated statistical analyses that aggregate the data (e.g. averages, percentages), show relationships among the data (e.g. ‘Students with lower grade point averages tend to score lower on a depression scale’) or compare across aggregated data (e.g. the USA has a higher gross domestic product than Spain). Quantitative research includes methodologies such as questionnaires, structured observations or experiments and stands in contrast to qualitative research. Qualitative research involves the collection and analysis of narratives and/or open-ended observations through methodologies such as interviews, focus groups or ethnographies.

Coghlan, D., Brydon-Miller, M. (2014).  The SAGE encyclopedia of action research  (Vols. 1-2). London, : SAGE Publications Ltd doi: 10.4135/9781446294406

What is the purpose of quantitative research?

The purpose of quantitative research is to generate knowledge and create understanding about the social world. Quantitative research is used by social scientists, including communication researchers, to observe phenomena or occurrences affecting individuals. Social scientists are concerned with the study of people. Quantitative research is a way to learn about a particular group of people, known as a sample population. Using scientific inquiry, quantitative research relies on data that are observed or measured to examine questions about the sample population.

Allen, M. (2017).  The SAGE encyclopedia of communication research methods  (Vols. 1-4). Thousand Oaks, CA: SAGE Publications, Inc doi: 10.4135/9781483381411

How do I know if the study is a quantitative design?  What type of quantitative study is it?

Quantitative Research Designs: Descriptive non-experimental, Quasi-experimental or Experimental?

Studies do not always explicitly state what kind of research design is being used.  You will need to know how to decipher which design type is used.  The following video will help you determine the quantitative design type.

• << Previous: I NEED TO . . .
• Next: What is Qualitative Research? >>
• Last Updated: May 13, 2024 12:01 PM
• URL: https://libguides.uta.edu/quantitative_and_qualitative_research

University of Texas Arlington Libraries 702 Planetarium Place · Arlington, TX 76019 · 817-272-3000

• Internet Privacy
• Accessibility
• Problems with a guide? Contact Us.

• Skip to main content
• Skip to primary sidebar
• Skip to footer
• QuestionPro

• Solutions Industries Gaming Automotive Sports and events Education Government Travel & Hospitality Financial Services Healthcare Cannabis Technology Use Case NPS+ Communities Audience Contactless surveys Mobile LivePolls Member Experience GDPR Positive People Science 360 Feedback Surveys
• Resources Blog eBooks Survey Templates Case Studies Training Help center

Home Market Research

Quantitative Research: What It Is, Practices & Methods

Quantitative research involves analyzing and gathering numerical data to uncover trends, calculate averages, evaluate relationships, and derive overarching insights. It’s used in various fields, including the natural and social sciences. Quantitative data analysis employs statistical techniques for processing and interpreting numeric data.

Research designs in the quantitative realm outline how data will be collected and analyzed with methods like experiments and surveys. Qualitative methods complement quantitative research by focusing on non-numerical data, adding depth to understanding. Data collection methods can be qualitative or quantitative, depending on research goals. Researchers often use a combination of both approaches to gain a comprehensive understanding of phenomena.

What is Quantitative Research?

Quantitative research is a systematic investigation of phenomena by gathering quantifiable data and performing statistical, mathematical, or computational techniques. Quantitative research collects statistically significant information from existing and potential customers using sampling methods and sending out online surveys , online polls , and questionnaires , for example.

One of the main characteristics of this type of research is that the results can be depicted in numerical form. After carefully collecting structured observations and understanding these numbers, it’s possible to predict the future of a product or service, establish causal relationships or Causal Research , and make changes accordingly. Quantitative research primarily centers on the analysis of numerical data and utilizes inferential statistics to derive conclusions that can be extrapolated to the broader population.

An example of a quantitative research study is the survey conducted to understand how long a doctor takes to tend to a patient when the patient walks into the hospital. A patient satisfaction survey can be administered to ask questions like how long a doctor takes to see a patient, how often a patient walks into a hospital, and other such questions, which are dependent variables in the research. This kind of research method is often employed in the social sciences, and it involves using mathematical frameworks and theories to effectively present data, ensuring that the results are logical, statistically sound, and unbiased.

Data collection in quantitative research uses a structured method and is typically conducted on larger samples representing the entire population. Researchers use quantitative methods to collect numerical data, which is then subjected to statistical analysis to determine statistically significant findings. This approach is valuable in both experimental research and social research, as it helps in making informed decisions and drawing reliable conclusions based on quantitative data.

Quantitative Research Characteristics

Quantitative research has several unique characteristics that make it well-suited for specific projects. Let’s explore the most crucial of these characteristics so that you can consider them when planning your next research project:

• Structured tools: Quantitative research relies on structured tools such as surveys, polls, or questionnaires to gather quantitative data . Using such structured methods helps collect in-depth and actionable numerical data from the survey respondents, making it easier to perform data analysis.
• Sample size: Quantitative research is conducted on a significant sample size  representing the target market . Appropriate Survey Sampling methods, a fundamental aspect of quantitative research methods, must be employed when deriving the sample to fortify the research objective and ensure the reliability of the results.
• Close-ended questions: Closed-ended questions , specifically designed to align with the research objectives, are a cornerstone of quantitative research. These questions facilitate the collection of quantitative data and are extensively used in data collection processes.
• Prior studies: Before collecting feedback from respondents, researchers often delve into previous studies related to the research topic. This preliminary research helps frame the study effectively and ensures the data collection process is well-informed.
• Quantitative data: Typically, quantitative data is represented using tables, charts, graphs, or other numerical forms. This visual representation aids in understanding the collected data and is essential for rigorous data analysis, a key component of quantitative research methods.
• Generalization of results: One of the strengths of quantitative research is its ability to generalize results to the entire population. It means that the findings derived from a sample can be extrapolated to make informed decisions and take appropriate actions for improvement based on numerical data analysis.

Quantitative Research Methods

Quantitative research methods are systematic approaches used to gather and analyze numerical data to understand and draw conclusions about a phenomenon or population. Here are the quantitative research methods:

• Primary quantitative research methods
• Secondary quantitative research methods

Primary Quantitative Research Methods

Primary quantitative research is the most widely used method of conducting market research. The distinct feature of primary research is that the researcher focuses on collecting data directly rather than depending on data collected from previously done research. Primary quantitative research design can be broken down into three further distinctive tracks and the process flow. They are:

A. Techniques and Types of Studies

There are multiple types of primary quantitative research. They can be distinguished into the four following distinctive methods, which are:

01. Survey Research

Survey Research is fundamental for all quantitative outcome research methodologies and studies. Surveys are used to ask questions to a sample of respondents, using various types such as online polls, online surveys, paper questionnaires, web-intercept surveys , etc. Every small and big organization intends to understand what their customers think about their products and services, how well new features are faring in the market, and other such details.

By conducting survey research, an organization can ask multiple survey questions , collect data from a pool of customers, and analyze this collected data to produce numerical results. It is the first step towards collecting data for any research. You can use single ease questions . A single-ease question is a straightforward query that elicits a concise and uncomplicated response.

This type of research can be conducted with a specific target audience group and also can be conducted across multiple groups along with comparative analysis . A prerequisite for this type of research is that the sample of respondents must have randomly selected members. This way, a researcher can easily maintain the accuracy of the obtained results as a huge variety of respondents will be addressed using random selection. 

Traditionally, survey research was conducted face-to-face or via phone calls. Still, with the progress made by online mediums such as email or social media, survey research has also spread to online mediums.There are two types of surveys , either of which can be chosen based on the time in hand and the kind of data required:

Cross-sectional surveys: Cross-sectional surveys are observational surveys conducted in situations where the researcher intends to collect data from a sample of the target population at a given point in time. Researchers can evaluate various variables at a particular time. Data gathered using this type of survey is from people who depict similarity in all variables except the variables which are considered for research . Throughout the survey, this one variable will stay constant.

• Cross-sectional surveys are popular with retail, SMEs, and healthcare industries. Information is garnered without modifying any parameters in the variable ecosystem.
• Multiple samples can be analyzed and compared using a cross-sectional survey research method.
• Multiple variables can be evaluated using this type of survey research.
• The only disadvantage of cross-sectional surveys is that the cause-effect relationship of variables cannot be established as it usually evaluates variables at a particular time and not across a continuous time frame.

Longitudinal surveys: Longitudinal surveys are also observational surveys , but unlike cross-sectional surveys, longitudinal surveys are conducted across various time durations to observe a change in respondent behavior and thought processes. This time can be days, months, years, or even decades. For instance, a researcher planning to analyze the change in buying habits of teenagers over 5 years will conduct longitudinal surveys.

• In cross-sectional surveys, the same variables were evaluated at a given time, and in longitudinal surveys, different variables can be analyzed at different intervals.
• Longitudinal surveys are extensively used in the field of medicine and applied sciences. Apart from these two fields, they are also used to observe a change in the market trend analysis , analyze customer satisfaction, or gain feedback on products/services.
• In situations where the sequence of events is highly essential, longitudinal surveys are used.
• Researchers say that when research subjects need to be thoroughly inspected before concluding, they rely on longitudinal surveys.

02. Correlational Research

A comparison between two entities is invariable. Correlation research is conducted to establish a relationship between two closely-knit entities and how one impacts the other, and what changes are eventually observed. This research method is carried out to give value to naturally occurring relationships, and a minimum of two different groups are required to conduct this quantitative research method successfully. Without assuming various aspects, a relationship between two groups or entities must be established.

Researchers use this quantitative research design to correlate two or more variables using mathematical analysis methods. Patterns, relationships, and trends between variables are concluded as they exist in their original setup. The impact of one of these variables on the other is observed, along with how it changes the relationship between the two variables. Researchers tend to manipulate one of the variables to attain the desired results.

Ideally, it is advised not to make conclusions merely based on correlational research. This is because it is not mandatory that if two variables are in sync that they are interrelated.

Example of Correlational Research Questions :

• The relationship between stress and depression.
• The equation between fame and money.
• The relation between activities in a third-grade class and its students.

03. Causal-comparative Research

This research method mainly depends on the factor of comparison. Also called quasi-experimental research , this quantitative research method is used by researchers to conclude the cause-effect equation between two or more variables, where one variable is dependent on the other independent variable. The independent variable is established but not manipulated, and its impact on the dependent variable is observed. These variables or groups must be formed as they exist in the natural setup. As the dependent and independent variables will always exist in a group, it is advised that the conclusions are carefully established by keeping all the factors in mind.

Causal-comparative research is not restricted to the statistical analysis of two variables but extends to analyzing how various variables or groups change under the influence of the same changes. This research is conducted irrespective of the type of relationship that exists between two or more variables. Statistical analysis plan is used to present the outcome using this quantitative research method.

Example of Causal-Comparative Research Questions:

• The impact of drugs on a teenager. The effect of good education on a freshman. The effect of substantial food provision in the villages of Africa.

04. Experimental Research

Also known as true experimentation, this research method relies on a theory. As the name suggests, experimental research is usually based on one or more theories. This theory has yet to be proven before and is merely a supposition. In experimental research, an analysis is done around proving or disproving the statement. This research method is used in natural sciences. Traditional research methods are more effective than modern techniques.

There can be multiple theories in experimental research. A theory is a statement that can be verified or refuted.

After establishing the statement, efforts are made to understand whether it is valid or invalid. This quantitative research method is mainly used in natural or social sciences as various statements must be proved right or wrong.

• Traditional research methods are more effective than modern techniques.
• Systematic teaching schedules help children who struggle to cope with the course.
• It is a boon to have responsible nursing staff for ailing parents.

B. Data Collection Methodologies

The second major step in primary quantitative research is data collection. Data collection can be divided into sampling methods and data collection using surveys and polls.

01. Data Collection Methodologies: Sampling Methods

There are two main sampling methods for quantitative research: Probability and Non-probability sampling .

Probability sampling: A theory of probability is used to filter individuals from a population and create samples in probability sampling . Participants of a sample are chosen by random selection processes. Each target audience member has an equal opportunity to be selected in the sample.

There are four main types of probability sampling:

• Simple random sampling: As the name indicates, simple random sampling is nothing but a random selection of elements for a sample. This sampling technique is implemented where the target population is considerably large.
• Stratified random sampling: In the stratified random sampling method , a large population is divided into groups (strata), and members of a sample are chosen randomly from these strata. The various segregated strata should ideally not overlap one another.
• Cluster sampling: Cluster sampling is a probability sampling method using which the main segment is divided into clusters, usually using geographic segmentation and demographic segmentation parameters.
• Systematic sampling: Systematic sampling is a technique where the starting point of the sample is chosen randomly, and all the other elements are chosen using a fixed interval. This interval is calculated by dividing the population size by the target sample size.

Non-probability sampling: Non-probability sampling is where the researcher’s knowledge and experience are used to create samples. Because of the researcher’s involvement, not all the target population members have an equal probability of being selected to be a part of a sample.

There are five non-probability sampling models:

• Convenience sampling: In convenience sampling , elements of a sample are chosen only due to one prime reason: their proximity to the researcher. These samples are quick and easy to implement as there is no other parameter of selection involved.
• Consecutive sampling: Consecutive sampling is quite similar to convenience sampling, except for the fact that researchers can choose a single element or a group of samples and conduct research consecutively over a significant period and then perform the same process with other samples.
• Quota sampling: Using quota sampling , researchers can select elements using their knowledge of target traits and personalities to form strata. Members of various strata can then be chosen to be a part of the sample as per the researcher’s understanding.
• Snowball sampling: Snowball sampling is conducted with target audiences who are difficult to contact and get information. It is popular in cases where the target audience for analysis research is rare to put together.
• Judgmental sampling: Judgmental sampling is a non-probability sampling method where samples are created only based on the researcher’s experience and research skill .

02. Data collection methodologies: Using surveys & polls

Once the sample is determined, then either surveys or polls can be distributed to collect the data for quantitative research.

Using surveys for primary quantitative research

A survey is defined as a research method used for collecting data from a pre-defined group of respondents to gain information and insights on various topics of interest. The ease of survey distribution and the wide number of people it can reach depending on the research time and objective makes it one of the most important aspects of conducting quantitative research.

Fundamental levels of measurement – nominal, ordinal, interval, and ratio scales

Four measurement scales are fundamental to creating a multiple-choice question in a survey. They are nominal, ordinal, interval, and ratio measurement scales without the fundamentals of which no multiple-choice questions can be created. Hence, it is crucial to understand these measurement levels to develop a robust survey.

Use of different question types

To conduct quantitative research, close-ended questions must be used in a survey. They can be a mix of multiple question types, including multiple-choice questions like semantic differential scale questions , rating scale questions , etc.

Survey Distribution and Survey Data Collection

In the above, we have seen the process of building a survey along with the research design to conduct primary quantitative research. Survey distribution to collect data is the other important aspect of the survey process. There are different ways of survey distribution. Some of the most commonly used methods are:

• Email: Sending a survey via email is the most widely used and effective survey distribution method. This method’s response rate is high because the respondents know your brand. You can use the QuestionPro email management feature to send out and collect survey responses.
• Buy respondents: Another effective way to distribute a survey and conduct primary quantitative research is to use a sample. Since the respondents are knowledgeable and are on the panel by their own will, responses are much higher.
• Embed survey on a website: Embedding a survey on a website increases a high number of responses as the respondent is already in close proximity to the brand when the survey pops up.
• Social distribution: Using social media to distribute the survey aids in collecting a higher number of responses from the people that are aware of the brand.
• QR code: QuestionPro QR codes store the URL for the survey. You can print/publish this code in magazines, signs, business cards, or on just about any object/medium.
• SMS survey: The SMS survey is a quick and time-effective way to collect a high number of responses.
• Offline Survey App: The QuestionPro App allows users to circulate surveys quickly, and the responses can be collected both online and offline.

Survey example

An example of a survey is a short customer satisfaction (CSAT) survey that can quickly be built and deployed to collect feedback about what the customer thinks about a brand and how satisfied and referenceable the brand is.

Using polls for primary quantitative research

Polls are a method to collect feedback using close-ended questions from a sample. The most commonly used types of polls are election polls and exit polls . Both of these are used to collect data from a large sample size but using basic question types like multiple-choice questions.

C. Data Analysis Techniques

The third aspect of primary quantitative research design is data analysis . After collecting raw data, there must be an analysis of this data to derive statistical inferences from this research. It is important to relate the results to the research objective and establish the statistical relevance of the results.

Remember to consider aspects of research that were not considered for the data collection process and report the difference between what was planned vs. what was actually executed.

It is then required to select precise Statistical Analysis Methods , such as SWOT, Conjoint, Cross-tabulation, etc., to analyze the quantitative data.

• SWOT analysis: SWOT Analysis stands for the acronym of Strengths, Weaknesses, Opportunities, and Threat analysis. Organizations use this statistical analysis technique to evaluate their performance internally and externally to develop effective strategies for improvement.
• Conjoint Analysis: Conjoint Analysis is a market analysis method to learn how individuals make complicated purchasing decisions. Trade-offs are involved in an individual’s daily activities, and these reflect their ability to decide from a complex list of product/service options.
• Cross-tabulation: Cross-tabulation is one of the preliminary statistical market analysis methods which establishes relationships, patterns, and trends within the various parameters of the research study.
• TURF Analysis: TURF Analysis , an acronym for Totally Unduplicated Reach and Frequency Analysis, is executed in situations where the reach of a favorable communication source is to be analyzed along with the frequency of this communication. It is used for understanding the potential of a target market.

Inferential statistics methods such as confidence interval, the margin of error, etc., can then be used to provide results.

Secondary Quantitative Research Methods

Secondary quantitative research or desk research is a research method that involves using already existing data or secondary data. Existing data is summarized and collated to increase the overall effectiveness of the research.

This research method involves collecting quantitative data from existing data sources like the internet, government resources, libraries, research reports, etc. Secondary quantitative research helps to validate the data collected from primary quantitative research and aid in strengthening or proving, or disproving previously collected data.

The following are five popularly used secondary quantitative research methods:

• Data available on the internet: With the high penetration of the internet and mobile devices, it has become increasingly easy to conduct quantitative research using the internet. Information about most research topics is available online, and this aids in boosting the validity of primary quantitative data.
• Government and non-government sources: Secondary quantitative research can also be conducted with the help of government and non-government sources that deal with market research reports. This data is highly reliable and in-depth and hence, can be used to increase the validity of quantitative research design.
• Public libraries: Now a sparingly used method of conducting quantitative research, it is still a reliable source of information, though. Public libraries have copies of important research that was conducted earlier. They are a storehouse of valuable information and documents from which information can be extracted.
• Educational institutions: Educational institutions conduct in-depth research on multiple topics, and hence, the reports that they publish are an important source of validation in quantitative research.
• Commercial information sources: Local newspapers, journals, magazines, radio, and TV stations are great sources to obtain data for secondary quantitative research. These commercial information sources have in-depth, first-hand information on market research, demographic segmentation, and similar subjects.

Quantitative Research Examples

Some examples of quantitative research are:

• A customer satisfaction template can be used if any organization would like to conduct a customer satisfaction (CSAT) survey . Through this kind of survey, an organization can collect quantitative data and metrics on the goodwill of the brand or organization in the customer’s mind based on multiple parameters such as product quality, pricing, customer experience, etc. This data can be collected by asking a net promoter score (NPS) question , matrix table questions, etc. that provide data in the form of numbers that can be analyzed and worked upon.
• Another example of quantitative research is an organization that conducts an event, collecting feedback from attendees about the value they see from the event. By using an event survey , the organization can collect actionable feedback about the satisfaction levels of customers during various phases of the event such as the sales, pre and post-event, the likelihood of recommending the organization to their friends and colleagues, hotel preferences for the future events and other such questions.

What are the Advantages of Quantitative Research?

There are many advantages to quantitative research. Some of the major advantages of why researchers use this method in market research are:

Collect Reliable and Accurate Data:

Quantitative research is a powerful method for collecting reliable and accurate quantitative data. Since data is collected, analyzed, and presented in numbers, the results obtained are incredibly reliable and objective. Numbers do not lie and offer an honest and precise picture of the conducted research without discrepancies. In situations where a researcher aims to eliminate bias and predict potential conflicts, quantitative research is the method of choice.

Quick Data Collection:

Quantitative research involves studying a group of people representing a larger population. Researchers use a survey or another quantitative research method to efficiently gather information from these participants, making the process of analyzing the data and identifying patterns faster and more manageable through the use of statistical analysis. This advantage makes quantitative research an attractive option for projects with time constraints.

Wider Scope of Data Analysis:

Quantitative research, thanks to its utilization of statistical methods, offers an extensive range of data collection and analysis. Researchers can delve into a broader spectrum of variables and relationships within the data, enabling a more thorough comprehension of the subject under investigation. This expanded scope is precious when dealing with complex research questions that require in-depth numerical analysis.

Eliminate Bias:

One of the significant advantages of quantitative research is its ability to eliminate bias. This research method leaves no room for personal comments or the biasing of results, as the findings are presented in numerical form. This objectivity makes the results fair and reliable in most cases, reducing the potential for researcher bias or subjectivity.

In summary, quantitative research involves collecting, analyzing, and presenting quantitative data using statistical analysis. It offers numerous advantages, including the collection of reliable and accurate data, quick data collection, a broader scope of data analysis, and the elimination of bias, making it a valuable approach in the field of research. When considering the benefits of quantitative research, it’s essential to recognize its strengths in contrast to qualitative methods and its role in collecting and analyzing numerical data for a more comprehensive understanding of research topics.

Best Practices to Conduct Quantitative Research

Here are some best practices for conducting quantitative research:

• Differentiate between quantitative and qualitative: Understand the difference between the two methodologies and apply the one that suits your needs best.
• Choose a suitable sample size: Ensure that you have a sample representative of your population and large enough to be statistically weighty.
• Keep your research goals clear and concise: Know your research goals before you begin data collection to ensure you collect the right amount and the right quantity of data.
• Keep the questions simple: Remember that you will be reaching out to a demographically wide audience. Pose simple questions for your respondents to understand easily.

Quantitative Research vs Qualitative Research

Quantitative research and qualitative research are two distinct approaches to conducting research, each with its own set of methods and objectives. Here’s a comparison of the two:

Quantitative Research

• Objective: The primary goal of quantitative research is to quantify and measure phenomena by collecting numerical data. It aims to test hypotheses, establish patterns, and generalize findings to a larger population.
• Data Collection: Quantitative research employs systematic and standardized approaches for data collection, including techniques like surveys, experiments, and observations that involve predefined variables. It is often collected from a large and representative sample.
• Data Analysis: Data is analyzed using statistical techniques, such as descriptive statistics, inferential statistics, and mathematical modeling. Researchers use statistical tests to draw conclusions and make generalizations based on numerical data.
• Sample Size: Quantitative research often involves larger sample sizes to ensure statistical significance and generalizability.
• Results: The results are typically presented in tables, charts, and statistical summaries, making them highly structured and objective.
• Generalizability: Researchers intentionally structure quantitative research to generate outcomes that can be helpful to a larger population, and they frequently seek to establish causative connections.
• Emphasis on Objectivity: Researchers aim to minimize bias and subjectivity, focusing on replicable and objective findings.

Qualitative Research

• Objective: Qualitative research seeks to gain a deeper understanding of the underlying motivations, behaviors, and experiences of individuals or groups. It explores the context and meaning of phenomena.
• Data Collection: Qualitative research employs adaptable and open-ended techniques for data collection, including methods like interviews, focus groups, observations, and content analysis. It allows participants to express their perspectives in their own words.
• Data Analysis: Data is analyzed through thematic analysis, content analysis, or grounded theory. Researchers focus on identifying patterns, themes, and insights in the data.
• Sample Size: Qualitative research typically involves smaller sample sizes due to the in-depth nature of data collection and analysis.
• Results: Findings are presented in narrative form, often in the participants’ own words. Results are subjective, context-dependent, and provide rich, detailed descriptions.
• Generalizability: Qualitative research does not aim for broad generalizability but focuses on in-depth exploration within a specific context. It provides a detailed understanding of a particular group or situation.
• Emphasis on Subjectivity: Researchers acknowledge the role of subjectivity and the researcher’s influence on the Research Process . Participant perspectives and experiences are central to the findings.

Researchers choose between quantitative and qualitative research methods based on their research objectives and the nature of the research question. Each approach has its advantages and drawbacks, and the decision between them hinges on the particular research objectives and the data needed to address research inquiries effectively.

Quantitative research is a structured way of collecting and analyzing data from various sources. Its purpose is to quantify the problem and understand its extent, seeking results that someone can project to a larger population.

Companies that use quantitative rather than qualitative research typically aim to measure magnitudes and seek objectively interpreted statistical results. So if you want to obtain quantitative data that helps you define the structured cause-and-effect relationship between the research problem and the factors, you should opt for this type of research.

At QuestionPro , we have various Best Data Collection Tools and features to conduct investigations of this type. You can create questionnaires and distribute them through our various methods. We also have sample services or various questions to guarantee the success of your study and the quality of the collected data.

Quantitative research is a systematic and structured approach to studying phenomena that involves the collection of measurable data and the application of statistical, mathematical, or computational techniques for analysis.

Quantitative research is characterized by structured tools like surveys, substantial sample sizes, closed-ended questions, reliance on prior studies, data presented numerically, and the ability to generalize findings to the broader population.

The two main methods of quantitative research are Primary quantitative research methods, involving data collection directly from sources, and Secondary quantitative research methods, which utilize existing data for analysis.

1.Surveying to measure employee engagement with numerical rating scales. 2.Analyzing sales data to identify trends in product demand and market share. 4.Examining test scores to assess the impact of a new teaching method on student performance. 4.Using website analytics to track user behavior and conversion rates for an online store.

1.Differentiate between quantitative and qualitative approaches. 2.Choose a representative sample size. 3.Define clear research goals before data collection. 4.Use simple and easily understandable survey questions.

MORE LIKE THIS

I Am Disconnected – Tuesday CX Thoughts

May 21, 2024

20 Best Customer Success Tools of 2024

May 20, 2024

AI-Based Services Buying Guide for Market Research (based on ESOMAR’s 20 Questions) 

Data Information vs Insight: Essential differences

May 14, 2024

Other categories

• Academic Research
• Artificial Intelligence
• Assessments
• Brand Awareness
• Case Studies
• Communities
• Consumer Insights
• Customer effort score
• Customer Engagement
• Customer Experience
• Customer Loyalty
• Customer Research
• Customer Satisfaction
• Employee Benefits
• Employee Engagement
• Employee Retention
• Friday Five
• General Data Protection Regulation
• Insights Hub
• Life@QuestionPro
• Market Research
• Mobile diaries
• Mobile Surveys
• New Features
• Online Communities
• Question Types
• Questionnaire
• QuestionPro Products
• Release Notes
• Research Tools and Apps
• Revenue at Risk
• Survey Templates
• Training Tips
• Uncategorized
• Video Learning Series
• What’s Coming Up
• Workforce Intelligence

Sampling Techniques for Quantitative Research

• First Online: 27 October 2022

Cite this chapter

• Moniruzzaman Sarker   ORCID: orcid.org/0000-0003-3595-5838 4 &
• Mohammed Abdulmalek AL-Muaalemi 5  

3598 Accesses

8 Citations

In quantitative research, collecting data from an entire population of a study is impractical in many instances. It squanders resources like time and money which can be minimized by choosing suitable sampling techniques between probability and non-probability methods. The chapter outlines a brief idea about the different categories of sampling techniques with examples. Sensibly selecting among the sampling techniques allows the researcher to generalize the findings to a specific study context. Although probability sampling is more appealing to draw a representative sample, non-probability sampling techniques also enable the researcher to generalize the findings upon implementing the sampling strategy wisely. Moreover, adopting probability sampling techniques is not feasible in many situations. The chapter suggests selecting sampling techniques should be guided by research objectives, study scope, and availability of sampling frame rather than looking at the nature of sampling techniques.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info
• Durable hardcover edition

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

Common Survey Sampling Techniques

Sampling Errors, Bias, and Objectivity

Recent developments in systematic sampling: A review

Bryman, A., & Bell, E. (2015). Business research methods (4th ed.). Oxford University Press.

Google Scholar  

Clottey, T. A., & Grawe, S. J. (2014). Non-response bias assessment in logistics survey research: Use fewer tests? International Journal of Physical Distribution & Logistics Management, 44 (5), 412–426. https://doi.org/10.1108/IJPDLM-10-2012-0314

Article   Google Scholar  

Collier, J. E., & Bienstock, C. C. (2007). An analysis of how nonresponse error is assessed in academic marketing research. Marketing Theory, 7 (2), 163–183. https://doi.org/10.1177/1470593107076865

Cooper, D. R., Schindler, P. S., & Sun, J. (2006). Business research methods (9th ed.). McGraw-Hill Irwin.

Creswell, J. W. (2014). Research design: Qualitative, quantitative, and mixed methods approaches (4th ed.). SAGE Publications, Incorporated.

Feild, L., Pruchno, R. A., Bewley, J., Lemay, E. P., & Levinsky, N. G. (2006). Using probability versus nonprobability sampling to identify hard-to-access participants for health-related research: Costs and contrasts. Journal of Aging and Health, 18 (4), 565–583. https://doi.org/10.1177/0898264306291420.

Hulland, J., Baumgartner, H., & Smith, K. M. (2017). Marketing survey research best practices: Evidence and recommendations from a review of JAMS articles. Journal of the Academy of Marketing Science, 46 (1), 92–108. https://doi.org/10.1007/s11747-017-0532-y

Lindner, J. R., Murphy, T. H., & Briers, G. E. (2001). Handling nonresponse in social science research. Journal of Agricultural Education, 42 (4), 43–53.

Malhotra, N. K., & Das, S. (2010). Marketing research: An applied orientation (6th ed.). Pearson Education.

Book   Google Scholar  

Marshall, M. N. (1996). Sampling for qualitative research. Family Practice, 13 (6), 522–526. https://doi.org/10.1093/fampra/13.6.522

Memon, M. A., Ting, H., Ramayah, T., Chuah, F., & Cheah, J.-H. (2017). A review of the methodological misconceptions and guidelines related to the application of structural equation modeling: A Malaysian scenario. Journal of Applied Structural Equation Modeling, 1 (1), i–xiii.

Rowley, J. (2014). Designing and using research questionnaires. Management Research Review, 37 (3), 308–330. https://doi.org/10.1108/MRR-02-2013-0027

Sarstedt, M., Bengart, P., Shaltoni, A. M., & Lehmann, S. (2018). The use of sampling methods in advertising research: A gap between theory and practice. International Journal of Advertising, 37 (4), 650–663. https://doi.org/10.1080/02650487.2017.1348329

Sax, L. J., Gilmartin, S. K., & Bryant, A. N. (2003). Assessing response rates and nonresponse bias in web and paper surveys. Research in Higher Education, 44 (4), 409–432. https://doi.org/10.1023/a:1024232915870

Seddon, P. B., & Scheepers, R. (2012). Towards the improved treatment of generalization of knowledge claims in IS research: Drawing general conclusions from samples. European Journal of Information Systems, 21 (1), 6–21.

Sekaran, U., & Bougie, R. (2016). Research methods for business: A skill building approach (7th ed.). John Wiley & Sons.

Zikmund, W. G., Babin, B. J., Carr, J. C., & Griffin, M. (2013). Business research methods (9th ed.). Cengage Learning.

Download references

Author information

Authors and affiliations.

Assistant Professor of Marketing, Southamton Malysia Business School, University of Southamton Malysia, Johor Bahru, Malaysia

Moniruzzaman Sarker

Faculty of Business and Accountancy, University of Malaya, Kuala Lumpur, Malaysia

Mohammed Abdulmalek AL-Muaalemi

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Moniruzzaman Sarker .

Editor information

Editors and affiliations.

Centre for Family and Child Studies, Research Institute of Humanities and Social Sciences, University of Sharjah, Sharjah, United Arab Emirates

M. Rezaul Islam

Department of Development Studies, University of Dhaka, Dhaka, Bangladesh

Niaz Ahmed Khan

Department of Social Work, School of Humanities, University of Johannesburg, Johannesburg, South Africa

Rajendra Baikady

Rights and permissions

Reprints and permissions

Copyright information

© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this chapter

Moniruzzaman Sarker, AL-Muaalemi, M.A. (2022). Sampling Techniques for Quantitative Research. In: Islam, M.R., Khan, N.A., Baikady, R. (eds) Principles of Social Research Methodology. Springer, Singapore. https://doi.org/10.1007/978-981-19-5441-2_15

Download citation

DOI : https://doi.org/10.1007/978-981-19-5441-2_15

Published : 27 October 2022

Publisher Name : Springer, Singapore

Print ISBN : 978-981-19-5219-7

Online ISBN : 978-981-19-5441-2

eBook Packages : Social Sciences

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Limitations and Weaknesses of Quantitative Research

• Post author: Edeh Samuel Chukwuemeka ACMC
• Post published: August 16, 2021
• Post category: Scholarly Articles

Limitations and Weaknesses of Quantitative Research: Research entails the collection of materials for  academic or other purposes. It is a process of gathering information and data to solve or existing problem or prevent future problems. Research works can be done via two methods. Qualitative research or quantitative research.

Qualitative research involves the carrying out of research by gathering non-numerical data. For example, gathering of video evidence, texts or messages for analysis. On the other hand, quantitative research is the process where by numerical data are collected and analyzed. It is effectively used to find patterns and averages as well as generalising a finding or result to a wider population. Quantitative research is mostly used in natural and social sciences such as biology, psychology, economics, among others.

Quantitative research could be carried out using any four methods of researching which are descriptive research, correlational research, experimental research or survey research. In descriptive, one seeks to know the ‘what’ of a thing rather than the ‘why’ of such thing. It tries to describe the various components of an information.

Correlational research involves the research between two variables to ascertain the relationship between the variables. It understudies the impact of one variable on the other. On the other hand, an experimental research is one that uses scientific methods to establish the relationship between groups of variables. That is, it tries to establish a cause-effect relationship between the various variables under study.

Recommended: How to become a good researcher: 5 qualities you need to have.

Finally, the survey research which is most widely used involves the preparation of set questionnaires, interviews and polls to which answers are provided by a segment of the target population and then, conclusions are drawn from such answers given. Survey research studies the relationship between various variables in a given research.

One of the major benefit of  quantitative research method is that it makes one arrive at a well considered conclusion since samples are collected from those who are directly affected by the research. The data collected are majorly converted to a numerical form which aids in statistical analysis. Also, quantitative research is more convenient for projects with scientific and social science inclinations.

Also see: Advantages and Disadvantages of quantitative and qualitative Research

Weaknesses of Quantitative Research

Notwithstanding the benefits of quantitative research, the research method has its own weaknesses and limitations. This is because the method is not applicable and convenient in all cases of research. Thus, using a quantitative research method in a research where qualitative research method should be used will not produce the needed result.

To this end, some of the weaknesses and limitations of quantitative research are highlighted below.

1. It Requires a Large Number of Respondents: In the course of carrying out a quantitative research, recourse has to be made to a large number of respondents. This is because you are sampling a section of a population to get their views, which views will be seen as that of the general population. In doing this, a huge number of respondents have to be consulted so as to get a fair view or percentage of the target population.

For example, if one wishes to carry out a quantitative research in Nigeria as to her acceptance of a policy of the government, one will need to consult wider. This is because Nigeria has a population of over 200 million people and the opinions of a few thousands cannot pass out as that of 200 million people. In the light of this, more respondents will be required to be interviewed so as to enable one get a fair view of the population.

Large number of respondents is thus, one of the weaknesses or limitations of quantitative research as a small sampling of a section of the target population might not be of much help to the research.

2. It is time consuming: Unlike qualitative research which has to do with analysis of already prepared data, quantitative research demands that you source for and collate the data yourself while converting such data collected into a numerical form for proper analysis. This process is time consuming. Again, the task of sending out questionnaires to respondents and waiting for answers to such questionnaires might be time consuming as most respondents will reply late or may not even reply at all.

Great patience is therefore needed in carrying out a quantitative research. It is therefore not always a good method of research in cases of urgencies as the time to get responses might take too long.

Also see: Major characteristics of customary laws

3. It requires huge resources: Quantitative research requires huge investment of time, money and energy. It is time consuming just as it also involve huge financial commitments.

In carrying out quantitative research, one needs to get your questions prepared, sent out and also followed up to ensure that such is answered. Also, some respondents might demand to be paid before giving their inputs to such a research. An example is the trending online surveys in which the target respondents are paid for every survey they carry out for a researcher.

4. Difficulty in Analyzing the Data Collected: Data are collected from respondents and then converted into statistics. This usually poses as a limitation to a researcher who is not an expert in statistics. Analysis of collected data is also demanding and time consuming. A researcher needs to make such information collected into numerical data and correlate them with the larger population. Where this is not properly done, it means that the outcome might be false or misleading.

Also, due to the fact that a researcher might not have control over the environment he is researching in, as any such environment is susceptible to change at any point in time, the outcome of his research might be inconsistent.

Recommended: Problems and criticism of democracy

5. Outcomes of quantitative research is usually limited: In quantitative research, the outcomes are usually limited. This is because the outcome is usually based on what the researcher wants. This limited outcome is due to the structured pattern of the questionnaires. Questionnaires usually have close ended questions which gives a respondent little or no opportunity of explanations. Thus, the answers provided are limited to the questions asked and nothing more.

6. Data outcomes are usually generalised : As noted earlier, quantitative research is usually conducted on a section of a target population and not on the whole population. The outcome of this research is then generalised as the view of the entire population. What this portends is that the views of  few respondents in that research is seen as that of the general populace. Such views from them might be biased or insincere, yet they are seen as that of the entire population.

In the light of this, the fallacy of hasty generalisation is prone to be committed in a quantitative research. Generalisation of the views of a section of the population might not be the best as their views may be biased.

Recommended: Advantages and Disadvantages of Capitalism

In conclusion, quantitative research is a veritable means of conducting research especially in the fields of natural sciences and social sciences. This is because it mostly has a one on one interaction between the researcher and the various respondents as it majorly studies behavior. This advantage notwithstanding, the research method has its own  limitations and weaknesses. These limitations and weaknesses often times affect the quality of a research which is done using the quantitative method of research.

Edeh Samuel Chukwuemeka, ACMC, is a lawyer and a certified mediator/conciliator in Nigeria. He is also a developer with knowledge in various programming languages. Samuel is determined to leverage his skills in technology, SEO, and legal practice to revolutionize the legal profession worldwide by creating web and mobile applications that simplify legal research. Sam is also passionate about educating and providing valuable information to people.

How Many Participants Do I Need For A Quantitative Study?

Sample sizes larger than 30 and less than 500 are appropriate for most research.

How many respondents should a research have?

There are different approaches for deciding number of responses or sample size. As a rule of thumb, one should use multiplier of minimum five to determine the sample size i.e. if you are having 30 questions in your questionnaire multiply it with 5 = 150 responses (minimum).

Does quantitative research need respondents?

Quick data collection: A quantitative research is carried out with a group of respondents who represent a population . A survey or any other quantitative research method applied to these respondents and the involvement of statistics, conducting, and analyzing results is quite straightforward and less time-consuming.

Why does quantitative research require many respondents?

How to collect quantitative data. Typically, quantitative research requires a large respondent population. This is because the results of your research will be representative of a larger population.

Why does quantitative research requires a large number of respondents?

Big sample needed: quantitative research requires a large sample of the population to deliver reliable results . The larger the sample of people, the more statistically accurate the outputs will be.

What is a good number of respondents for a survey?

As a very rough rule of thumb, 200 responses will provide fairly good survey accuracy under most assumptions and parameters of a survey project. 100 responses are probably needed even for marginally acceptable accuracy.

How many respondents is acceptable in qualitative research?

We generally recommend a panel size of 30 respondents for in-depth interviews if the study includes similar segments within the population. We suggest a minimum sample size of 10, but in this case, population integrity in recruiting is critical.

Why is 30 the minimum sample size?

It’s that you need at least 30 before you can reasonably expect an analysis based upon the normal distribution (i.e. z test) to be valid. That is it represents a threshold above which the sample size is no longer considered “small”.

Is 30 a good sample size for quantitative research?

Although sample size between 30 and 500 at 5% confidence level is generally sufficient for many researchers (Altunışık et al., 2004, s.

Is 100 a good sample size for quantitative research?

The minimum sample size is 100

Most statisticians agree that the minimum sample size to get any kind of meaningful result is 100. If your population is less than 100 then you really need to survey all of them.

What is a small sample size in quantitative research?

Depending on what your objectives are, a sample size of less than 60 but more than 30 might not be too small. In any case, having small sample size means your study has less statistical power , and non-parametric tests are used to analyze such data.

How do you determine sample size in quantitative research?

How to Determine the Sample Size in a Quantitative Research Study

• Choose an appropriate significance level (alpha value). An alpha value of p = . …
• Select the power level. Typically a power level of . …
• Estimate the effect size. …
• Organize your existing data. …
• Things You’ll Need.

How many participants do you need for a questionnaire?

For reliability analysis the standard advice is to have at least 10 participants per item on your scale. However, this should be regarded as the bare minimum.

How many participants is good for a qualitative study?

While some experts in qualitative research avoid the topic of “how many” interviews “are enough,” there is indeed variability in what is suggested as a minimum. An extremely large number of articles, book chapters, and books recommend guidance and suggest anywhere from 5 to 50 participants as adequate.

What is the ideal sample size in a qualitative research?

Our general recommendation for in-depth interviews is a sample size of 30 , if we’re building a study that includes similar segments within the population. A minimum size can be 10 – but again, this assumes the population integrity in recruiting.

Why are there 5 participants in qualitative research?

That the probability of someone encountering an issue is 31%

Based on these assumptions, Jakob Nielsen and Tom Landauer built a mathematical model that shows that, by doing a qualitative test with 5 participants, you will identify 85% of the issues in an interface .

What is a statistically valid survey?

Statistical Validity. Statistical Validity indicates how much one can rely on the conclusions derived from a survey sample . The combinations of proper sampling methods, adequate sample sizes and unbiased data collection improve the reliability of survey results.

What is a statistically valid response rate to a survey?

A response rate of 50% or more in a survey is considered excellent. The response rate is good. However, prior to conducting a survey it is best to calculate the number of responses required to achieve 5% margin of error at 95% confidence and aim to get more responses than this.

What is the best number of respondents when conducting a research?

Survey research generally accepts for quantitative studies, therefore, it is ideal to achieve a number of respondents exceeding 200 .

Why is it best to have a large number of respondents?

The more people that participate , the better the study is. Having a large number of participants reduces the risk of accidently having extreme, or biased, groups – such as having all adults or all children in a study that should have equal numbers of adults and children.

Which do you think is more important in a quantitative research — more respondents or less respondents explain your answer?

Quantitative data can help you see the big picture. Finding general answers: Quantitative research usually has more respondents than qualitative research because it is easier to conduct a multiple-choice survey than a series of interviews or focus groups. …

Why is there a need to sample respondents?

Sampling is done because you usually cannot gather data from the entire population . Even in relatively small populations, the data may be needed urgently, and including everyone in the population in your data collection may take too long.

Does in quantitative research respondents are given very limited opportunity to elaborate their responses?

It is concerned with describing the nature, characteristics and components of the population or a phenomenon. Correlational Research is also called ex post facto. … In quantitative research, respondents are given very limited opportunity to elaborate their responses.

Related Q&A:

© 2022 - 2024 Times Mojo - All Rights Reserved Home | About | Contact | Copyright | Report Content | Privacy | Cookie Policy | Terms & Conditions | Sitemap

A .gov website belongs to an official government organization in the United States.

A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

• Test for Fentanyl
• if You Think Someone is Overdosing
• Stop Overdose
• Naloxone FAQs
• Stigma Reduction

About Stop Overdose

• Through preliminary research and strategic workshops, CDC identified four areas of focus to address the evolving drug overdose crisis.
• Stop Overdose resources speak to the reality of drug use, provide practical ways to prevent overdoses, educate about the risks of illegal drug use, and show ways to get help.

Drugs take nearly 300 lives every day. 1 To address the increasing number of overdose deaths related to both prescription opioids and illegal drugs, we created a website to educate people who use drugs about the dangers of illegally manufactured fentanyl, the risks and consequences of mixing drugs, the lifesaving power of naloxone, and the importance of reducing stigma around recovery and treatment options. Together, we can stop drug overdoses and save lives.

What you can do

• Get the facts on fentanyl
• Learn about lifesaving naloxone
• Understand the risks of polysubstance use
• Reduce stigma around recovery and treatment

Explore and download Stop Overdose and other educational materials on CDC's Overdose Resource Exchange .

• Centers for Disease Control and Prevention, National Center for Health Statistics. National Vital Statistics System, Mortality 2018-2021 on CDC WONDER Online Database, released in 2023. Data are from the Multiple Cause of Death Files, 2018-2021, as compiled from data provided by the 57 vital statistics jurisdictions through the Vital Statistics Cooperative Program. Accessed at http://wonder.cdc.gov/mcd-icd10-expanded.html on Mar 5, 2024

Every day, drugs claim hundreds of lives. The Stop Overdose website educates drug users on fentanyl, naloxone, polysubstance use, and dealing with stigma.